SavedAdd your journal

Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2000 / Cilt: 2 - Sayı: 3

AN INVESTIGATION ON MECHANICAL PROPERTIES OF POLYETHYLENE AND POLYPROPYLENE

POLİETİLEN VE POLİPROPİLENİN MEKANİK ÖZELLİKLERİNİN İNCELEMESİ

Hakan ÇETİNEL
Pages
79–87
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

On the other hand, in addition to changing the density of the materials by deformation, the behaviour of specimens exposed to UV beam and original specimens in dry temperature has been studied

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, firstly, the mechanical properties of polypropylene, low-density polyethylene and high-density polyethylene have been determined by tensile testing.
📊
Key Findings & Data:Secondly, the effect of ultraviolet (UV) beams on the mechanical properties of polypropylene and polyethylene has been studied.
💡
Conclusion & Impact:On the other hand, in addition to changing the density of the materials by deformation, the behaviour of specimens exposed to UV beam and original specimens in dry temperature has been studied
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Polietilen · Polipropilen · Mekanik özellikler

Abstract

In this study, firstly, the mechanical properties of polypropylene, low-density polyethylene and high-density polyethylene have been determined by tensile testing. Secondly, the effect of ultraviolet (UV) beams on the mechanical properties of polypropylene and polyethylene has been studied. On the other hand, in addition to changing the density of the materials by deformation, the behaviour of specimens exposed to UV beam and original specimens in dry temperature has been studied

Özet

Bu çalışmada, ilk önce çekme deneyi ile polipropilen (PP), alçak yoğunluklu polietilen (AYPE) ve yüksek yoğunluklu polietilenin (YYPE) mekanik özellikleri belirlenmiştir. Daha sonra, ultraviyole (UV) ışınlarına tabi tutulan polietilen (PE) ve polipropilenin mekanik özelliklerine UV ışınlarının etkisi araştırılmıştır. Öte yandan, deformasyonun malzemelerin yoğunluklarını değiştirmesine ek olarak, UV ışınına tabi tutulmuş numunelerle, UV ışınına tabi tutulmamış olanların kuru sıcaklık ortamındaki davranışları incelenmiştir

🔖

Cite This Article

ÇETİNEL, H. (2000). AN INVESTIGATION ON MECHANICAL PROPERTIES OF POLYETHYLENE AND POLYPROPYLENE. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 2 - Sayı: 3, 79–87. https://ajindex.com/articles/220034

References (1)

  1. Akkurt S., (1991): “Plastik Malzeme Bilgisi”, Birsen Yayınevi, s.7, İstanbul. Askeland D.R., (1996): “The Science and Engineering of Materials”, Chapman&Hall, p.518, China. Callister W.D., (2000): “Materials Science and Engineering An Introduction”, John Wiley & Sons, Inc., p.500, United States of America. Fine L., Beall H., (1990): “Chemistry for Engineers and Scientists”, Saunders College Publishing, p.557, USA. Jastrzebski Z.D., (1959): “Nature and Properties of Engineering Materials”, John Wiley & Sons, Inc. p.74, Japan. Schaffer J.P., Saxena A., Antolovich D., Sanders T.H., Warner S.B., (1999): “The Science and Design of Engineering Materials”, Mc Graw-Hill, p.194, Singapore. Serdaroğlu N., (1956): “Plastik Maddeler Cilt I”, Kutulmuş Matbaası, s.1-2, İstanbul. Yaşar H., (1992): “Plastikler Dünyası”, TMMOB Makina Mühendisleri Odası, s.1, Ankara.