Journals / Kastamonu Üniversitesi Orman Fakültesi Dergisi / 2012 / Cilt: 12 - Sayı: 3

The Effects of Humidity on Thermal Conductivity of Fir Wood

Pages
121–123
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Consequently, oven-dry wood samples could be used as insulation material

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study it was aimed to describe the effects of different humidity on thermal conductivity of Uludag Fir (Abies bornmülleriana M.).
📊
Key Findings & Data:The lowest thermal conductivity of 0.0910 Kcal/mh°C was obtained from oven-dry samples.
💡
Conclusion & Impact:Consequently, oven-dry wood samples could be used as insulation material
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Thermal Conductivity · Uludağ Fir · Humidity

Abstract

In this study it was aimed to describe the effects of different humidity on thermal conductivity of Uludag Fir (Abies bornmülleriana M.). The lowest thermal conductivity of 0.0910 Kcal/mh°C was obtained from oven-dry samples. The highest thermal conductivity of 0.1904 Kcal/mh°C was obtained in completely wet samples. Consequently, oven-dry wood samples could be used as insulation material

🔖

Cite This Article

ESEN, R., LIKOS, E., ÖZCAN, C., KORKMAZ, M., KILINÇ, İ. (2012). The Effects of Humidity on Thermal Conductivity of Fir Wood. Kastamonu Üniversitesi Orman Fakültesi Dergisi, Cilt: 12 - Sayı: 3, 121–123. https://ajindex.com/articles/216470

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Bucur, V. (2006). Acoustics of Wood, 2nd Edition, ISBN-10 3-540-26123-0, Springer Verlag Berlin Heidelberg New York. Pellerin, R. F., and Ross, R. J. 2002.
  2. Nondestructive Evaluation of Wood, Forest Products Society Publication No. 7250, ISBN 1- 892529-26-2.
  3. Sengupta, K., Das, R., and Banerjee, G. 1992. “Measurement of thermal conductivity of refractory bricks by the non-steady state hot-wire method using differential platinum resistance thermometry,” Journal of Testing and Evaluation 29(6), 455-459.