Journals / Turkish Journal of Chemistry / 2020 / Cilt: 44 - Sayı: 5

Preparation of different thin film catalysts by direct current magnetron sputtering for hydrogen generation

Pages
1327–1338
Publication Date
2020-10-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A maximum hydrogen generation rate of 1653 mL/g(cat).min was obtained for the Pt-Co3O4 catalyst.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, thin films of Co, Ni, Pd, and Pt were prepared on Co3O4 support material in pellet form using the direct current (DC) magnetron sputtering method for use as catalysts for hydrogen generation from NaBH4.Characterization of the catalysts was carried out using X-ray diffraction (XRD), scanning electronic microscopy (SEM), and X-ray photoelectron spectroscopy (XPS).
📊
Key Findings & Data:According to cross-sectional SEM images, catalyst thicknesses were observed in the range of approximately 115.3-495.8 nm.
💡
Conclusion & Impact:A maximum hydrogen generation rate of 1653 mL/g(cat).min was obtained for the Pt-Co3O4 catalyst.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Direct current magnetron sputtering · hydrogen generation · sodium borohydride

Abstract

In this study, thin films of Co, Ni, Pd, and Pt were prepared on Co3O4 support material in pellet form using the direct current (DC) magnetron sputtering method for use as catalysts for hydrogen generation from NaBH4.Characterization of the catalysts was carried out using X-ray diffraction (XRD), scanning electronic microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). According to cross-sectional SEM images, catalyst thicknesses were observed in the range of approximately 115.3-495.8 nm. The particle sizes were approximately 25.0, 21.4, 33.9, and 9.5 nm for Ni-Co3O4, Co-Co3O4, Pd-Co3O4, and Pt-Co3O4 catalysts, respectively. The increase in NaOH initial concentration provides an increase in the rate of hydrogen generation for Co, Ni, and Pd catalysts. A maximum hydrogen generation rate of 1653 mL/g(cat).min was obtained for the Pt-Co3O4 catalyst.

🔖

Cite This Article

BOZKURT, G., OZER, A., YURTCAN, A. B. (2020). Preparation of different thin film catalysts by direct current magnetron sputtering for hydrogen generation. Turkish Journal of Chemistry, Cilt: 44 - Sayı: 5, 1327–1338. https://ajindex.com/articles/212677

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Benaissi K, 2010, GREEN CHEM, V12, P220, DOI 10.1039/b913218j Bozkurt G, 2019,
  2. ENERGY, V180, P702, DOI 10.1016/j.energy.2019.04.196 Bozkurt G, 2018, INT J HYDROGEN ENERG, V43, P22205, DOI 10.1016/j.ijhydene.2018.10.106 Cai HK, 2016,
  3. FUEL, V166, P297, DOI 10.1016/j.fuel.2015.11.011 Chen Y, 2008, FUEL PROCESS TECHNOL, V89, P966, DOI 10.1016/j.fuproc.2008.04.005 Chen YB, 2015,
  4. FUEL, V140, P685, DOI 10.1016/j.fuel.2014.10.022 Chen YB, 2011, FUEL PROCESS TECHNOL, V92, P1368, DOI 10.1016/j.fuproc.2011.02.019 Cho KW, 2007, CATAL TODAY, V120, P298, DOI 10.1016/j.cattod.2006.09.004 Guizard C, 2009, CATAL TODAY, V146, P367, DOI 10.1016/j.cattod.2009.05.012 Guo YP, 2013, APPL SURF SCI, V273, P253, DOI 10.1016/j.apsusc.2013.02.025 Guo YP, 2012, INT J HYDROGEN ENERG, V37, P1577, DOI 10.1016/j.ijhydene.2011.10.019 Huang ZM, 2013, INT J ENERG RES, V37, P1187, DOI 10.1002/er.2937 Inokawa H, 2016, INT J ENERG RES, V40, P2078, DOI 10.1002/er.3582 Krishnan P, 2009, APPL CATAL B-ENVIRON, V86, P137, DOI 10.1016/j.apcatb.2008.08.005 Kuang M, 2015,
  5. NANOTECHNOLOGY, V26, DOI 10.1088/0957-4484/26/30/304002 Li H, 2013, J POWER SOURCES, V239, P277, DOI 10.1016/j.jpowsour.2013.03.167 Liang JY, 2008, INT J HYDROGEN ENERG, V33, P4048, DOI 10.1016/j.ijhydene.2008.05.082 Paladini M, 2014, APPL CATAL B-ENVIRON, V158, P400, DOI 10.1016/j.apcatb.2014.04.047 Pana O, 2013, J ALLOY COMPD, V574, P477, DOI 10.1016/j.jallcom.2013.05.153 Patel N, 2007, APPL CATAL A-GEN, V323, P18, DOI 10.1016/j.apcata.2007.01.053 Patel N, 2010, THIN SOLID FILMS, V518, P4779, DOI 10.1016/j.tsf.2010.01.029 Patterson AL, 1939, PHYS REV, V56, P978, DOI 10.1103/PhysRev.56.978 Rakap M, 2011, J ALLOY COMPD, V509, P7016, DOI 10.1016/j.jallcom.2011.04.023 Sahin O, 2010, INT J ENERG RES, V34, P557, DOI 10.1002/er.1563 Sahiner N, 2015, FUEL PROCESS TECHNOL, V132, P1, DOI 10.1016/j.fuproc.2014.12.008 Smith EF, 2005, CHEM COMMUN, P5633, DOI 10.1039/b512311a Wang J, 2017, MATER RES BULL, V95, P204, DOI 10.1016/j.materresbull.2017.07.039 Wang XN, 2015, CATAL COMMUN, V67, P45, DOI 10.1016/j.catcom.2015.03.026 Wang Y, 2016, RENEW ENERG, V89, P285, DOI 10.1016/j.renene.2015.12.026 Wasa K., 1992, HDB SPUTTER DEPOSITI. Yoon C, 2009, CURR APPL PHYS, V9, pS237, DOI 10.1016/j.cap.2008.12.018 Zabielaite A, 2018, INT J HYDROGEN ENERG, V43, P23310, DOI 10.1016/j.ijhydene.2018.10.179 Zhang XY, 2019, APPL SURF SCI, V469, P764, DOI 10.1016/j.apsusc.2018.11.094