Journals / Kastamonu Üniversitesi Orman Fakültesi Dergisi / 2015 / Cilt: 15 - Sayı: 2

Hardness and Adhesion Characteristics of Protective Layer on Oil Heat Treated Scots Pine Wood

Yağlı Isıl İşlem Görmüş Sarıçam Odununda Koruyucu Katmanların Yapışma ve Sertlik Özellikleri

Pages
261–266
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that hardness of varnish layers (38) on oil heat treated scots pine wood is higher than paint layers (25.6).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Wood is a preferred important material due to having many advantages for many uses.
📊
Key Findings & Data:Among these, heat treatment methods increase the durability of wood properties.
💡
Conclusion & Impact:Results showed that hardness of varnish layers (38) on oil heat treated scots pine wood is higher than paint layers (25.6).
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Wood is a preferred important material due to having many advantages for many uses. However, wood is degraded by time under the effects of biotic and abiotic factors. Therefore, wood should be protected from fungi, insects and other climate factors. Among these, heat treatment methods increase the durability of wood properties. Especially, oil heat treatment improves the dimensional stability and color stability in a positive direction. Thus, wood can be used for garden furniture or siding. In this study, water based varnish and paint were applied on oil heat treated scots pine (Pinus sylvestris L.) wood. Effects of oil heat treatment on adhesion strength and hardness of varnish and paint films were determined. Results showed that hardness of varnish layers (38) on oil heat treated scots pine wood is higher than paint layers (25.6).

Özet

Ahşap sahip olduğu bazı avantajları sayesinde birçok kullanım yerinde tercih edilen önemli bir malzemedir. Ancak, biyotik ve abiyotik faktörlerin zaman içerisindeki etkisiyle ahşapta bazı bozulmalar görülmektedir. Bu sebeple, ahşabın mantar, böcek ve diğer iklim koşullarının etkilerinden dolayı korunması gerekmektedir. Örneğin, koruma yöntemlerinden birisi olan ısıl işlem ahşabın bazı özelliklerini olumlu yönde artırmaktadır. Özellikle, yağlı ısıl işlemin ahşabın boyutsal kararlılığı ve renk kararlılığını iyileştirdiği görülmektedir. Bu sayede ahşap, bahçe mobilyalarında ya da dış cephe kaplamalarında kullanılabilmektedir. Bu çalışmada, bezir yağı ile ısıl işlem görmüş sarıçam (Pinus sylvestris L.) odunundan hazırlanan deney numunelerine, su bazlı vernik ve su bazlı boya tatbik edilerek, yapışma ve sertlik performansları belirlenmiştir. Araştırma sonuçlarına göre, bezir yağı ile ısıl işlem gören sarıçam odunlarında, vernik katmanı sertlik değerleri (38) boyakatmanı sertlik değerlerinden (25.6) yüksekçıkmıştır.

🔖

Cite This Article

KESİK, H. İ., VURDU, H., ÇAĞATAY, K., ÖZKAN, O. E., ÖNCEL, M. (2015). Hardness and Adhesion Characteristics of Protective Layer on Oil Heat Treated Scots Pine Wood. Kastamonu Üniversitesi Orman Fakültesi Dergisi, Cilt: 15 - Sayı: 2, 261–266. https://ajindex.com/articles/211110

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Anonim, 2015.
  2. Firma Güvenlik Bilgi Formu, Yeni Turan Bezir Yağ San. ve Tic. A.Ş., İstanbul. ASTM D 4366-95., Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests. ASTM International, USA, 2002. ASTM D-3023, Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents. ASTM International, USA, 2011. ASTM D-4541, Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers. ASTM International, USA, 2009.
  3. Atar, M., Keskin, H., Kurt, R. 2003. Sarıçam odununda emprenye etme ve renk açma işleminin vernik katman sertliğine etkileri. KSÜ Fen ve Mühendislik Dergisi, 6(1), 85-96.
  4. Bazyar, B. 2012. Decay resistance and physical properties of oil heat treated aspen wood. BioResources, 7(1), 0696-0705.
  5. Dubey, M.K., Pang, S., Walker, J. 2011. Effect of oil heating age on colour and dimensional stability of heat treated Pinus radiata. European Journal of Wood and Wood Products, 69 (2), 255-262.
  6. Dubey, M.K., Pang, S., Walker, J. 2012. Changes in chemistry, color, dimensional stability and fungal resistance of Pinus radiata D. Don wood with oil heat-treatment, Holzforschung, 66 (1), 49-57. FPInnovations® Forintek Division, Canada, 2008. Coatability of oil-thermal-treated post – MPB Lodgepole pine sapwood. Hill, C.A.S. 2006, Wood modification chemical thermal and other processes, John Wiley & Sons Pres. Homan, W., Tjeerdsma, B., Beckers, E. Jorissen, A. 2000. Structural and other properties of modified wood. World conference on timber engineering. Whistler Resort, British Columbia, Canada July 31 - August 3, 2000. Jämsä, S., Ahola, P., Viitaniemi, P. 2000. Long-term natural weathering of coated ThermoWood. Pigment & Resin Technology, 29 (2), 68-74.
  7. Özkan, O.E. 2013. Isıl işlemle muamele edilmiş göknar odununun biyolojik, mekanik, fiziksel ve dış ortam dayanımı özellikleri. Yüksek Lisans Tezi, Kastamonu Üniversitesi Fen Bilimleri Enstitüsü, 95 s. Kastamonu. Petrič, M., Knehtl, B., Krause, A., Militz, H., Pavlič, M., Pétrissans, M., Gérardin, P. 2007. Wettability of waterborne coatings on chemically and thermally modified pine wood. Journal of Coatings Technology and Research, 4 (2), 203- 206. DOI 10.1007/s11998-007-9023-2
  8. Sidorova, E. 2008. Oil heat treatment of wood. Proceedings of the 4th meeting of the Nordic Baltic Network in Wood Material Science & Engineering, 13-14
  9. November, Riga, Latvia. Suttie, E., Thompson, J.H.R. 2001. Opportunites for UK Grown Timber: Wood Modific