Journals / International Journal of Intelligent Systems and Applications in Engineering / 2019 / Cilt: 7 - Sayı: 4

Reducing Feed Line Width for Optimal Electrical Parameters of a 1x4 Rectangular MicrostripArray

Pages
232–237
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Levenberg-Marquardt was used as the training algorithm in the calculation with ANN and tested for 8 measured values.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Today, mobile devices are required to be portable in size and have long-lasting power supplies.
📊
Key Findings & Data:In order to meet these needs, especially the intense increase in array antenna studies has been observed frequently in recent years.
💡
Conclusion & Impact:Levenberg-Marquardt was used as the training algorithm in the calculation with ANN and tested for 8 measured values.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Today, mobile devices are required to be portable in size and have long-lasting power supplies. For this reason, it is desirable that the components used in the devices have low power consumption, in particular the size of the antennas and that they meet the need for high band. In order to meet these needs, especially the intense increase in array antenna studies has been observed frequently in recent years. In this study, an array of 1x4 microstrip antenna elements was designed and produced. For this purpose, the study focused on the possible smallest width of the feed line considering the high antenna performance. Electrical parameters such as return loss, gain, directivity and radiation efficiency of the antenna array designed for KU Band region at 16 GHz resonance frequency were obtained and its performance was evaluated. In addition, the return loss, frequency and bandwidth of the antenna were calculated with Artificial Neural Networks (ANN). The ANN structure, which is trained with Multilayer Perceptron (MLP) network structure, is a 4-input, 3- output structure. Levenberg-Marquardt was used as the training algorithm in the calculation with ANN and tested for 8 measured values.

🔖

Cite This Article

DÜNDAR, Ö., GÜLTEKİN, S. S., UZER, D. (2019). Reducing Feed Line Width for Optimal Electrical Parameters of a 1x4 Rectangular MicrostripArray. International Journal of Intelligent Systems and Applications in Engineering, Cilt: 7 - Sayı: 4, 232–237. https://ajindex.com/articles/203548

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. Khan O. M., Ahmad Z., Islam Q., 2007, “Ku Band Microstrip Patch Antenna Array”, 2007, IEEE, 1-4244-1494-6/07W. -K. Chen, Linear Networks and Systems. Belmont, CA, USA: Wadsworth, 1993, pp. 123–135
  2. James H., 1989, Handbook of Microstrip Antennas, 1989, London
  3. Schneider M., “Microstrip Lines for Microwave Integrated Circuits”, BellSyst, Tegh J., 48, pp. 1421-1444, 1969
  4. Hammerstad E., Bekkadal F., 1975. A Microstrip Handbook, ELA Breport, STF44A74169, University of Trondheim, Norway [5] Pozar, D. M., 2005,. Microwave Engineering, John Wiley & Sons, 691 s., USA
  5. Balanis C. A., 1997, Antenna theory Analysis and Desing, 2nd ed. John Wiley and Sons, New York 1997
  6. Çakır G., 2004, Beam Scaning MicrostripArray Antenna Desing For Mobile Communication Systems: Analytical Calculations, Computer Simulations and Measurements, İnstitue of Secience, Kocaeli, 2004 [8] Levenberg K., 1944, A Method For the Solution of Certain Nonlinear Problems in Least Squares, Quart. Appl. Math., 2, s. 164-168, 1944
  7. Marquardt D. W., 1963, An Algorithm For Least-Squares Estimation Of Nonlinear Parameters, J. Soc. Ind. Appl. Math, 11, s. 431-441, 1963
  8. Dündar Ö., 2017, Determination of Desing Parameters of Patch Antenna Array Using Neurel Networks, İnstitue of Secience, Konya, 2017.