Journals / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2017 / Cilt: 19 - Sayı: 56

Buckling of Symmetrically Laminated Thin Rectangular Composite Plates

Simetrik Katmanlı İnce Dikdörtgen Kompozit Plakların Burkulması

Pages
553–568
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Thus, it is expected to save material, labor, time and test costs during production stage.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Critical buckling loads of symmetrically laminated thin rectangular composite plates were examined in this study.
📊
Key Findings & Data:Critical buckling loads of 24 differently laminated simply supported plates with in-plane force at the edge were calculated parametrically for 12 different aspect ratios.
💡
Conclusion & Impact:Thus, it is expected to save material, labor, time and test costs during production stage.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Critical buckling loads of symmetrically laminated thin rectangular composite plates were examined in this study. Rayleigh-Ritz Method was used to solve the governing energy equations based on Classical Laminated Plate Theory. Critical buckling loads of 24 differently laminated simply supported plates with in-plane force at the edge were calculated parametrically for 12 different aspect ratios. Results were compared with those obtained by ANSYS software package based on Finite Element Method, which seem to be approximate. The aim of this study was mainly to find the most suitable lamination type of plates. Nondimensionally tabulated results were given for practical use at the preliminary structural design stage of composite vessels. Thus, it is expected to save material, labor, time and test costs during production stage.

Özet

Bu çalışmada simetrik katmanlı ince dikdörtgen kompozit plakların Laminasyon Plak Teorisi'nin (KLPT) denklemlerine göre RayleighRitz Yöntemi (R-R) ile gerçekleştirilmiştir. Kenarlarından basit mesnetli, düzlemsel yükleme etkisindeki (Nx) 24 farklı dizilimli kompozit plakın kritik burkulma yükü (N), 12 farklı kenar oranı (a/b ve b/a) için parametrik olarak hesaplanmıştır. Sonuçlar Sonlu Elemanlar Yöntemi (SEY) temelli ANSYS paket yazılımı sonuçlarıyla karşılaştırılmış ve yakın sonuçlar elde edilmiştir. Bu çalışmanın amacı; hazırlanan boyutsuz tabloların kullanımıyla uygun plak tiplerinin bulunması ve kompozit teknelerin yapısal ön tasarımında kullanılacak pratik bilgiler elde edilmesidir. Böylelikle üretim sırasında, malzeme, iş gücü, zaman ve test maliyetlerinden tasarruf edilmesi öngörülmüştür.

🔖

Cite This Article

ALTUNSARAY, E. (2017). Buckling of Symmetrically Laminated Thin Rectangular Composite Plates. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 19 - Sayı: 56, 553–568. https://ajindex.com/articles/198783

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Reuben, R.L. 1994. Materials in Marine Technology. SpringerVerlag, London Limited, UK
  2. Shenoi, R.A., Wellicome, J.F. 1993. Composite Materials in Maritime Structures, Volume-I (Fundamental Aspects), Cambridge University Pres, NY
  3. Shenoi, R.A., Wellicome, J.F. 1993. Composite Materials in Maritime Structures, Volume-II (Practical Considerations), Cambridge University Pres, NY
  4. Mouritz, A.P., Gellert, E., Burchill, P., Challis K., 2001. Review of Advanced Composite Structures for Naval Ships and Submarines, Composite Structures, Cilt. 53, s.21-41.DOI:10.1016/S0263- 8223(00)00175-6 [5] Savcı, M., 1987. Gemi Yapısında Levhalar ve Silindirik Kabuklar, İ.T.Ü. Gemi İnş. ve Deniz Bil. Fak, İstanbul
  5. Lekhnitskii, S.G.1968. Anisotropic Plates, Gordon and Breach, NewYork
  6. Aran, A., 1990. Elyaf Takviyeli Karma Malzemeler, İ.T.Ü. Kütüphanesi Sayı:1420, Gümüşsuyu, İstanbul
  7. Powell, P.C., 1994. Engineering with fibre-polymer laminates, Chapman & Hall, London, UK
  8. Mallick. P. K., 1997. Composites engineering handbook, Marcel Dekker Inc., NY
  9. ASM Handbook, 2001. Volume 21, Composites, ASM International
  10. Harper, C.A., 2002. Handbook of plastics, elastomers, and composites, McGraw-Hill, NY
  11. Ambartsumyan, S.A, 1970. Theory of Anisotropic Plates, Technomic Publishing, Co., Wesport Conn
  12. Baharlou, B., Leissa A.W., 1987. Vibration and Buckling of Generally Laminated Composite Plates with Arbitrary Edge conditions, Int. J. Mech. Sci. Vol. 29, No. 8, pp. 545-555.DOI: 10.1016/0020-7403(87)90026-9 [14] Lakshminarayana, L., Kumar, Krishna Mohana Rao G., 2012. Buckling analysis of quasiisotropic symmetrically laminated rectangular composite plates with an elliptical/circular cutout subjected to linearly varying in-plane loading using FEM, International Journal Of Mechanics, Issue 1, Volume 6
  13. Hu, H., Badir, A., Abatan, A., 2003. Buckling behavior of a graphite/epoxy composite plate under parabolic variation of axial loads, Int. J. Mech. Sci. 45, 1135- 1147.DOI:10.1016/j.ijmecsci.200 3.08.003 [16] Darvizeh, M., Darvizeh, A., Ansari, R., Sharma, C.B., 2004. Buckling analysis of generally laminated composite plates (generalized differential quadrature rules versus Rayleigh-Ritz method), Composite Structures 63, 69- 74.DOI: 10.1016/S0263- 8223(03)00133-8 [17] Aydoğdu, M., 2009. A new shear deformation theory for laminated composite plates, Composite Structures 89, 94-101.DOI: 10.1016/j.compstruct.2008.07.00 8 [18] Felix, D.H., Bamb