Journals / Electrica / 2021 / Cilt: 21 - Sayı: 1

A Broadband, Polarization Insensitive, Wide Incidence-AngleSlotted Ring/Lumped Resistor-Based Metamaterial Absorber for K u-Band Applications

Journal
Electrica
Pages
96–104
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The proposed unit-cell structure of the MA is novel, consisting of a slotted ring with eight symmetrically-located lumped resistors, FR-4 material, and a metallic ground, which is compatible with low-cost PCB fabrication; therefore, the MA is suitable for practical microwave applications in the Ku -band

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A broadband-slotted ring/lumped resistor-based metamaterial absorber (MA) is presented in this study for Ku -band microwave applications.
📊
Key Findings & Data:Numerical results of the MA indicate that it can achieve a broadband absorption ratio of more than 85% in the frequency range of 12.4–17.6 GHz and has active polarization insensitivity and wide incidence-angle response over the entire operation band between 12.4-17.6 GHz.
💡
Conclusion & Impact:The proposed unit-cell structure of the MA is novel, consisting of a slotted ring with eight symmetrically-located lumped resistors, FR-4 material, and a metallic ground, which is compatible with low-cost PCB fabrication; therefore, the MA is suitable for practical microwave applications in the Ku -band
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

A broadband-slotted ring/lumped resistor-based metamaterial absorber (MA) is presented in this study for Ku -band microwave applications. Numerical results of the MA indicate that it can achieve a broadband absorption ratio of more than 85% in the frequency range of 12.4–17.6 GHz and has active polarization insensitivity and wide incidence-angle response over the entire operation band between 12.4-17.6 GHz. The designed MA is ultrathin around λ/14.7 in terms of wavelength at its lowest operation frequency, corresponding to 1.7 mm. The proposed unit-cell structure of the MA is novel, consisting of a slotted ring with eight symmetrically-located lumped resistors, FR-4 material, and a metallic ground, which is compatible with low-cost PCB fabrication; therefore, the MA is suitable for practical microwave applications in the Ku -band

🔖

Cite This Article

AKSİMSEK, S. (2021). A Broadband, Polarization Insensitive, Wide Incidence-AngleSlotted Ring/Lumped Resistor-Based Metamaterial Absorber for K u-Band Applications. Electrica, Cilt: 21 - Sayı: 1, 96–104. https://ajindex.com/articles/198019

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. N. Garcia, M. Nieto-Vesperinas, ''Left-Handed Materials Do Not Make a Perfect Lens''. Phys. Rev. Lett., vol. 88, no. 20, pp. 207403-4, May, 2002. [Crossref] 2. M. M. Hasan, M. R. I Faruque, M. T. Islam, ''Dual band metamaterial antenna for LTE/bluetooth/WiMAX system'', Sci. Rep., vol. 8, no. 1240, pp. 1-17, Jan. 2018. [Crossref] 3. Y. Xie, X. Fan, Y. Chen, J. D. Wilson, R. N. Simons, J. Q. Xiao, ''A subwavelength resolution microwave/6.3 GHz camera based on a metamaterial absorber'', Sci. Rep., vol. 7, no. 40490, pp. 1-8, Jan. 2017. [Crossref] 4. D. R. Smith, Willie J. Padilla, D. C. Vier, S. C. Nemat-Nasser, S. Schultz, ''Composite Medium with Simultaneously Negative Permeability and Permittivity'', Phys. Rev. Lett., vol. 84, pp. 4184-4187, May, 2000. [Crossref] 5. D. R. Smith, S. Schultz, P. Markoš, M. Soukoulis, ''Determination of effective permittivity and permeability of metamaterials from reflection and transmission coefficients'', Phys. Rev. B - Condens. Matter Mater. Phys., vol. 65, no. 19, pp. 195104-5, Apr. 2002. [Crossref] 6. J. B. Pendry, D. Schurig, D. R. Smith, ''Controlling electromagnetic fields'', Science, vol. 312, no. 5781, pp. 1780-1782, June, 2006. [Crossref] 7. G. T. Ruck GT, D. E. Barrick DE, W. D. Stuart WD, C. K. Krichbaum, ''Radar Cross Section Handbook'', Springer US, New York, USA, 1970. [Crossref] 8. W. W. Salisbury, ''Absorbant body for electromagnetic waves'', US Pat., no. 486608, June, 1952. 9. D. R. Smith, J. B. Pendry, M. C. K. Wiltshire, ''Metamaterials and negative refractive index'', Science, vol. 305, no. 5685, pp. 788-792, Aug. 2004. [Crossref] 10. P. Yu et al., ''Broadband Metamaterial Absorbers'', Adv. Opt. Mater., vol. 7, no. 3, pp. 1800995-32, Feb. 2019. 11. S. Gu, B. Su, X. Zhao, ''Planar isotropic broadband metamaterial absorber'', J. Appl. Phys., vol. 114, no. 16, pp. 163702-6, Oct. 2013. [Crossref] 12. C. Zhanga, Q. Chenga, J. Yang, J. Zhao, T. J. Cui, ''Broadband metamaterial for optical transparency and microwave absorption'', Appl. Phys. Lett., vol. 110, no. 14, Apr. 2017. [Crossref] 13. Y. J. Yoo et al., ''Metamaterial absorber for electromagnetic waves in periodic water droplets'', Sci. Rep., vol. 5 pp. 14018-8, Sep. 2015. [Crossref] 14. M. Yoo, S. Lim, ''Polarization-independent and ultrawideband metamaterial absorber using a hexagonal artificial impedance surface and a resistor-capacitor layer'', IEEE Trans. Antennas Propag., vol. 62, no. 5, pp. 2652-2668, May, 2014. [Crossref] 15. T. T. Nguyen, S. L