SavedAdd your journal

Journals / Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering / 2015 / Cilt: 16 - Sayı: 2

-

MİKROELEKTROLİZ YÖNTEMİ İLE MODEL ÇÖZELTİDEN REAKTİF BLACK 5 GİDERİMİ

Belgin KARABACAKOĞLU
İbrahim ZURNACI
Fatma MEMİŞ
Kıvanç KAYA
Yeşim ÖZTAYLAN
Pages
317–326
Publication Date
2015-11-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Under the conditions of an initial pH of 3, RB5 concentration of 50 mg/L, pumping speed of 30 rpm, and conductivity of 3 mS/cm, the dye removal efficiencies of 97.5% for Fe/C filling and 96.6% for CS/C filling were achieved

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, microelectrolysis (ME) method was used for the treatment of the Reactive Black 5, which is a type of azo dye from the model wastewater.
📊
Key Findings & Data:In microelectrolysis experiments the effects of operational parameters such as initial RB5 concentration (50-150 mg/L), the pumping speed of the solution (30-60 rpm), initial pH value of the solution , solution conductivity (3-9 mS/cm) and temperature (25-45 oC) were examined.
💡
Conclusion & Impact:Under the conditions of an initial pH of 3, RB5 concentration of 50 mg/L, pumping speed of 30 rpm, and conductivity of 3 mS/cm, the dye removal efficiencies of 97.5% for Fe/C filling and 96.6% for CS/C filling were achieved
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:: Mikroelektroliz · Reaktif Black 5 · Boyar madde

Abstract

In this study, microelectrolysis (ME) method was used for the treatment of the Reactive Black 5, which is a type of azo dye from the model wastewater. ME reactor was filled by iron chip-granular activated carbon (Fe/C) or carbon steel-granular activated carbon (CS/C) mixtures. In microelectrolysis experiments the effects of operational parameters such as initial RB5 concentration (50-150 mg/L), the pumping speed of the solution (30-60 rpm), initial pH value of the solution , solution conductivity (3-9 mS/cm) and temperature (25-45 oC) were examined. Under the conditions of an initial pH of 3, RB5 concentration of 50 mg/L, pumping speed of 30 rpm, and conductivity of 3 mS/cm, the dye removal efficiencies of 97.5% for Fe/C filling and 96.6% for CS/C filling were achieved

Özet

Bu çalışmada bir azo boya olan Reaktif Black 5 (RB5) içeren model atık suyun arıtımı için mikroelektroliz (ME) yöntemi kullanıldı. Demir talaşı-granül aktif karbon (Fe/C) ve karbon çeliği-granül aktif karbon (KÇ/C) karışımları ME reaktörü dolgusu olarak kullanıldı. Mikroelektroliz deneylerinde boya derişiminin (50-150 mg/L), çözelti pompalama hızının (30-60 rpm), çözelti pH değerinin (2-4), çözelti iletkenliğinin (3-9 mS/cm) ve sıcaklığın (25-45 0C) boya giderim yüzdesine olan etkileri incelendi. Her iki dolgu için de çalışılan parametrelerin en uygun değerleri pH=3, 50 mg/L boya derişimi, 30 dev/dk pompalama hızı ve 3 mS/cm iletkenlik olarak belirlendi. Bu koşullarda (Fe/C) dolgu ile %97,5; (KÇ/C) dolgu ile %96,6’ lık RB% giderimine ulaşıldı.

🔖

Cite This Article

KARABACAKOĞLU, B., ZURNACI, İ., MEMİŞ, F., KAYA, K., ÖZTAYLAN, Y. (2015). -. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, Cilt: 16 - Sayı: 2, 317–326. https://ajindex.com/articles/196786

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Chen Z., Sun X., Liu Z., Huang X. and Jia R. (2013). A Novel Application of Micro Electrolysis-Fenton Process on High-strength Acidic Dye Wastewater, Nature Environment and Pollution Technology 12( 2) 255-260.
  2. Cheng, H., Xu, W., Liu, J., Wang, H., He, Y. and Chen, G. (2007). Pretreatment of Wastewater from Triazine Manufacturing by Coagulation, Electrolysis, and Internal Microelectrolysis, Journal Hazardous Materials 146, 385–392.
  3. Cheng, L., Bi X. and Liu, C. (2010). Pretreatment of Straw Pulp and Papermaking Middle Stage Wastewater by Iron-carbon Microelectrolysis, IEEE. Fan, L., Ni, J., Wu, Y. and Zhang,Y., (2009). Treatment of Bromoamine Acid Wastewater using Combined Process of Micro-Electrolysis and Biological Aerobic Filter, Journal Hazardous Materials, 162, 1204-1210.
  4. Guo, X., Cai, Y. Wei, Z. H.,Hou Yang, X. and Wang, Z. (2013). Treatment of Di Azo Dye C.I. Reactive Black 5 in Aqueous Solution by Combined Process of Interior Micro Electrolysis and Ozonation, Water Science & Technology, 67 1880-1885. http1://www.sigmaaldrich.com/catalog/product/sial/306452?lang=en®ion=TR Huang, D., Yue, Q., Fu, K., Zhang, B., Gao, B., Li, Q. and Wang, Y. (2014). Application for Acrylonitrile Wastewater Treatment by New Micro-electrolysis Ceramic Fillers, Desalination and Water Treatment, 1-9.
  5. Kuşvuran E., Irmak S., Yavuz H.I., Samil A. and Erbatur O. (2005). Comparison of the Treatment Methods Efficiency for Decolorization and Mineralization of Reactive Black 5 azo dye, J. Hazard. Mater., 119, 109–116.
  6. Lai, B., Zhou, Y., Yang, P., Yang, J. and Wang, J. (2013). Degradation of 3,3-iminobis-Propanenitrile in Aqueous Solution by Fe0 /GAC Micro-electrolysis System, Chemosphere, 90 1470-1477.
  7. Lan, S.,Ju, F. and Wu, X. (2012). Treatment of Wastewater Containing EDTA-Cu(II) using the Combined Process of Interior Microelectrolysis and Fenton Oxidation–coagulation, Separation and Purification Technology, 89, 117–124.
  8. Li, M., Zou, D., Zou, H. and Fan D. (2011) Degradation of Nitrobenzene in Simulated Wastewater by Iron-Carbon Micro-electrolysis Packing, Environmental Technology, 33 (15-16) 1761-6.
  9. Pazos, M., Sanroman, A.M. and Rivera M. (2011). Development of an Electrochemical Cell for the Removal of Reactive Black 5, Desalination, 274, 39-43.
  10. Qin, G. and Gong, D. (2014). Pretreatment of Petroleum Refinery Wastewater by Microwave-Enhanced Fe0/GAC Micro-electrolysis, Desalination and Water Treatment, 52, 2512–2518.
  11. Qin, L., Zhang, G., Meng, Q., Xu, L. and Lv, B. (2012). Enhanc