SavedAdd your journal

Journals / Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering / 2015 / Cilt: 16 - Sayı: 2

-

AKTİF KARBON-POLİVİNİL ALKOL KOMPOZİT KÜRECİKLERİ İLE SENTETİK ATIKSUDAN CR(VI) GİDERİMİ

Yasar AYDIN
Nuran DEVECİ AKSOY
Emine KARATAŞ
Bahar YEŞİLADALI
Pages
97–105
Publication Date
2015-11-10
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that, depending on composition, composite beads were 1.4-2.1 times more effective in Cr(VI) removal with respect to raw activated carbon whose Cr(VI) removal capacity and extent were determined as 3.61 mg.g-1 and 18%, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, composite carbon beads were prepared at different mass ratios of powdered activated carbon, polyvinyl alcohol and glutaraldehyde.
📊
Key Findings & Data:The surface area of the synthesized beads were analyzed by N2 adsorption (BET) and pore structure was visualized by scanning electron microscopy.
💡
Conclusion & Impact:Results showed that, depending on composition, composite beads were 1.4-2.1 times more effective in Cr(VI) removal with respect to raw activated carbon whose Cr(VI) removal capacity and extent were determined as 3.61 mg.g-1 and 18%, respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Cr(VI) adsorption · Activated carbon · Polyvinyl alcohol composite beads.

Abstract

In this study, composite carbon beads were prepared at different mass ratios of powdered activated carbon, polyvinyl alcohol and glutaraldehyde. The beads were used as adsorbent in Cr(VI) removal from synthetic wastewater. The surface area of the synthesized beads were analyzed by N2 adsorption (BET) and pore structure was visualized by scanning electron microscopy. Cr (VI) adsorption experiments were conducted at room temperature under conditions of 5 g.l-1 adsorbent dose, pH 3.0 and 120 rpm shaking rate. Results showed that, depending on composition, composite beads were 1.4-2.1 times more effective in Cr(VI) removal with respect to raw activated carbon whose Cr(VI) removal capacity and extent were determined as 3.61 mg.g-1 and 18%, respectively. The enhanced efficacy of Cr(VI) removal was attributed to the increase in the number of hydroxylic functional groups as well as the change in pore size distribution

Özet

In this study, composite carbon beads were prepared at different mass ratios of powdered activated carbon, polyvinyl alcohol and glutaraldehyde. The beads were used as adsorbent in Cr(VI) removal from synthetic wastewater. The surface area of the synthesized beads were analyzed by N2 adsorption (BET) and pore structure was visualized by scanning electron microscopy. Cr (VI) adsorption experiments were conducted at room temperature under conditions of 5 g.l-1 adsorbent dose, pH 3.0 and 120 rpm shaking rate. Results showed that, depending on composition, composite beads were 1.4-2.1 times more effective in Cr(VI) removal with respect to raw activated carbon whose Cr(VI) removal capacity and extent were determined as 3.61 mg.g-1 and 18%, respectively. The enhanced efficacy of Cr(VI) removal was attributed to the increase in the number of hydroxylic functional groups as well as the change in pore size distribution.

🔖

Cite This Article

AYDIN, Y., AKSOY, N. D., KARATAŞ, E., YEŞİLADALI, B. (2015). -. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, Cilt: 16 - Sayı: 2, 97–105. https://ajindex.com/articles/196738

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Abechi, S.E., C.E. Gimba, C.E. Uzairu, A. and Dallatu, Y.A. (2013). Preparation and Characterization of Activated Carbon from Palm Kernel Shell by Chemical Activation, Research Journal of Chemical Sciences 3(7), 54-61.
  2. Aggarwal, D., Goyal, M. and Bansal, R.C. (1999). Adsorption of Chromium by Activated Carbon from Aqueous Solution, Carbon 37(12), 1989-1997.
  3. Babel, S. and Kurniawan, T.A. (2004). Cr(VI) Removal from Synthetic Wastewater using Coconut Shell Charcoal and Commercial Activated Carbon Modified with Oxidizing Agents and/or Chitosan, Chemosphere 54(7), 951-967. Chang,Y. H., Hsieh,K. H. and Chang F.C. (2009). Removal of Hg2+from Aqueous Solution using a Novel Composite Carbon Adsorbent, Journal of Applied Polymer Science 112 (4), 2445-2454.
  4. Chingombe, P., Saha, B. and Wakeman, R.J. (2005). Surface Modification and Characterisation of a Coal-Based Activated Carbon, Carbon 43(15), 3132-3143.
  5. Choi, H. D., Cho, J. M., Baek, K., Yang, J. S. and Lee, J. Y. (2009). Influence of Cationic Surfactant on Adsorption of Cr(VI) onto Activated Carbon, Journal of Hazardous Materials 161(2-3), 1565- 1568. Costa, V.C., Costa, H.S., Vasconcelos, W.L., Pereira, M.M.O., Rodrigo, L. and Mansur, H.S. (2007) Preparation of Hybrid Biomaterials for Bone Tissue Engineering, Materials Research 10(1), 21- 26, doi:10.1590/S1516-14392007000100006. Khezami, L. and Capart, R. (2005). Removal of chromium(VI) from Aqueous Solution by Activated Carbons: Kinetic and Equilibrium Studies, Journal of Hazardous Materials 123(1-3), 223-231.
  6. Mohan, D. and Pittman Jr., C.U. (2006) Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water, Journal of Hazardous Materials B137(2), 762-811.
  7. Mohan, D., Singh, K. and Singh, V. (2005). Removal of Hexavalent Chromium from Aqueous Solution using Low-cost Activated Carbons Derived from Agricultural waste Materials and Activated Carbon Fabric Cloth, Industrial Engineering Chemistry Research 44(4), 1027-1042.
  8. Monser, L. and Adhoum, N. (2002). Modified Activated Carbon for The Removal of Copper, Zinc, Chromium and Cyanide from Wastewater, Separation and Purification Technology 26(2-3), 137- 146. Owlad, M., Aroua, M.K., Daud, W.A.W. and Baroutian, S. (2009). Removal of Hexavalent Chromium Contaminated Water and Wastewater: A Review, Water Air and Soil Pollution 200(1-4), 59-77.
  9. Park, S. J. and Jang, Y. S. (2002). Pore Structure and Surface Properties of Chemically Modified Activated Carbons for Adsorption Mechanis