SavedAdd your journal

Journals / European Journal of Technique / 2017 / Cilt: 7 - Sayı: 2

PREDICTION OF THERMAL PERFORMANCE OF DESIGNED DIFFERENT OBSTACLES ON ABSORBER PLATES IN SOLAR AIR COLLECTORS BY SUPPORT VECTOR MACHINE

Fatih KOÇYİĞİT
Vedat Veli ÇAY
Ömer Osman DURSUN
Ebru Kavak AKPINAR
Pages
186–194
Publication Date
2017-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Comparison between predicted and experimental results indicates that the proposed SVM model can be used for estimating the efficiency of SAHs with reasonable accuracy.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, energy performance of a new flat plate solar air collector (SAHs) with different obstacles at fin shape and rectangle Type I and Type II was investigated.
📊
Key Findings & Data:Further, the measurements were performed at different values of mass flow rate of air (0.0074, 0.0052, 0.0016 kg/s).
💡
Conclusion & Impact:Comparison between predicted and experimental results indicates that the proposed SVM model can be used for estimating the efficiency of SAHs with reasonable accuracy.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Solar Air Collector · Thermal Efficiency · SVM

Abstract

In this study, energy performance of a new flat plate solar air collector (SAHs) with different obstacles at fin shape and rectangle Type I and Type II was investigated. The measured parameters were the inlet and outlet temperatures, the absorbing plate temperatures, the ambient temperature, and the solar radiation. Further, the measurements were performed at different values of mass flow rate of air (0.0074, 0.0052, 0.0016 kg/s). The thermal efficiency was calculated based on the measurements The results obtained were trained and tested with the support vector machine (SVM) which is one of the regression analyse methods. 10-fold cross-validation method was used to evaluate the regression performance. The best regression analysis result was obtained using cubic SVM method in which R2 was 0.88 in the Type II air collector. Comparison between predicted and experimental results indicates that the proposed SVM model can be used for estimating the efficiency of SAHs with reasonable accuracy.

🔖

Cite This Article

KOÇYİĞİT, F., ÇAY, V. V., DURSUN, Ö. O., AKPINAR, E. K. (2017). PREDICTION OF THERMAL PERFORMANCE OF DESIGNED DIFFERENT OBSTACLES ON ABSORBER PLATES IN SOLAR AIR COLLECTORS BY SUPPORT VECTOR MACHINE. European Journal of Technique, Cilt: 7 - Sayı: 2, 186–194. https://ajindex.com/articles/194454

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Koçyiğit H., Yutucu plaka üzerine farklı türde kanatçıkların yerleştirildiği bir havalı kollektörün enerji ve ekserji analizi, Yüksek Lisans, Fırat Üniversitesi, 2008. Güneş Enerjisi Potansiyel Atlası, (2007). www.eiei.gov.tr Karsli, S., Performance analysis of new-design solar air collectors for drying applications, Renewable Energy, 32, (2007), pp.1645-1660.
  2. Ucar, A., Inallı, M., Thermal and exergy analysis of solar air collectors with passive augmentation techniques, International Communications in Heat and Mass Transfer, 33 (2006), pp. 1281–1290.
  3. Moummi, N., Youcef-Ali, S., Moummi, A., Desmons, J.Y., Energy analysis of a solar air collector with rows of fins, Renewable Energy, 29, (2004), 13, pp. 2053-2064.
  4. Hegazy Adel, A.,, Optimization of flow-channel depth for conventional flat-plate solar air heaters, Renewable Energy, 7, (1996) 1, pp.15-21.
  5. Dincer, I., On energetic, exergetic and environmental aspects of drying systems, International Journal of Energy Research, 26 (2002), 8, pp.717-727.
  6. Dincer, I. and Sahin, A.Z., A new model for thermodynamic analysis of a drying process, International Journal of Heat and Mass Transfer, 47 (2004), 4, pp.645-652.
  7. Midilli, A., Kucuk, H.,, Energy and exergy analysis of solar drying process of Pistachio, Energy, 28, (2003) pp. 539-556.
  8. Kurtbas, İ., Durmuş, A., Efficiency and exergy analysis of a new solar air heater, Renewable Energy, 29, (2004), pp. 1489-1501.
  9. Aldabbagh L.B.Y., Egelioglu, F., Ikan M., Single and double pass solar air heaters with wire mesh as packing bed, Energy, 35, (2010) pp. 3783–3787.
  10. Yeh, H., Ho, C., Hou, J., The improvement of collector efficiency in solar air heaters by simultaneously air flow over and under the absorbing plate, Energy, 24, (1999), 857-871.
  11. Karim, Md. A., Hawlader, M.N.A., Performance investigation of flat plate, v-corrugated and finned air collectors, Energy, 31, (2006), pp. 452-470.
  12. Hachemi A., Experimental study of thermal performance of offset rectangular plate fin absorber-plates, Renewable Energy, 17 (1999) 3 pp. 371–84.
  13. Benli, H., Determination of thermal performance calculation of two different types solar air collectors with the use of ANN, Int. Jo. of Heat and Mass Transfer, 60, (2013) pp. 1-7.
  14. Esen H., Özgen F., Esen M., Sengür A., Artificial neural network and wavelet neural network approaches for modelling of a solar air heater, Expert System with Applications, 36, (2009), pp. 11240-11248.
  15. Zhong, Z. D., Zhu, X. J., and Cao, G. Y., Modeling a PEMFC by a support