Journals / Turkish Journal of Electrical Engineering and Computer Science / 2010 / Cilt: 18 - Sayı: 2

Stator resistance estimation using ANN in DTC IM drives

Pages
197–210
Publication Date
2010-02-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Experimental and simulated results prove the usefulness and feasibility of the proposed strategy as compared with conventional methods.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Torque control of induction motors (IM) requires accurate estimation of the flux in the motor.
📊
Key Findings & Data:The proposed ANN resistance estimator has shown good performance in both the transient and steady states.
💡
Conclusion & Impact:Experimental and simulated results prove the usefulness and feasibility of the proposed strategy as compared with conventional methods.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Induction machine · direct torque control (DTC) · artificial neural network

Abstract

Torque control of induction motors (IM) requires accurate estimation of the flux in the motor. But the flux estimate, when estimated from the stator circuit variables, is highly dependent on the stator resistance of the IM. As a result, the flux estimate is prone to errors due to variation in the stator resistance, especially at low stator frequencies. In this paper, an Artificial Neural Network (ANN) is used to adjust the stator resistance of an IM. A back propagation training algorithm was used in training the neural network for the simulation. The proposed ANN resistance estimator has shown good performance in both the transient and steady states. The system is first simulated with computer software and tested by hardware in the loop. Then, it is implemented using a TMS320C6711, 32-bit fixed point Digital Signal Processor (DSP). Experimental and simulated results prove the usefulness and feasibility of the proposed strategy as compared with conventional methods.

Özet

Torque control of induction motors (IM) requires accurate estimation of the flux in the motor. But the flux estimate, when estimated from the stator circuit variables, is highly dependent on the stator resistance of the IM. As a result, the flux estimate is prone to errors due to variation in the stator resistance, especially at low stator frequencies. In this paper, an Artificial Neural Network (ANN) is used to adjust the stator resistance of an IM. A back propagation training algorithm was used in training the neural network for the simulation. The proposed ANN resistance estimator has shown good performance in both the transient and steady states. The system is first simulated with computer software and tested by hardware in the loop. Then, it is implemented using a TMS320C6711, 32-bit fixed point Digital Signal Processor (DSP). Experimental and simulated results prove the usefulness and feasibility of the proposed strategy as compared with conventional methods.

🔖

Cite This Article

AKTAŞ, M., OKUMUŞ, H. İ. (2010). Stator resistance estimation using ANN in DTC IM drives. Turkish Journal of Electrical Engineering and Computer Science, Cilt: 18 - Sayı: 2, 197–210. https://ajindex.com/articles/189179

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...