Journals / Turkish Journal of Electrical Engineering and Computer Science / 2014 / Cilt: 22 - Sayı: 2

Design and implementation of a programmable high-voltage impulse measurement system

Pages
262–275
Publication Date
2014-05-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Its lightweight, portable, and economical design brings about a prevalence of availability for medium- and small-scale electromechanical manufacturers.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:High-voltage impulses (HVIs) are produced under laboratory conditions in order to emulate actual internal (switching) and external (lightning, thunderbolt) voltages.
📊
Key Findings & Data:HVI resistance tests are essential to meet national and international standards on the production of electromechanical devices and materials, such as switchgears, and transformers that operate under these actual conditions.
💡
Conclusion & Impact:Its lightweight, portable, and economical design brings about a prevalence of availability for medium- and small-scale electromechanical manufacturers.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:High voltage · lightning impulse · switching impulse

Abstract

High-voltage impulses (HVIs) are produced under laboratory conditions in order to emulate actual internal (switching) and external (lightning, thunderbolt) voltages. HVI resistance tests are essential to meet national and international standards on the production of electromechanical devices and materials, such as switchgears, and transformers that operate under these actual conditions. Accurate measurement of HVI is excessively difficult since the voltage level is so high, while the time parameters are relatively constricted. In this study, a reliable automatic HVI measuring and recording system, which accommodates a series of hardware and software designs in order to satisfy the constraints of the standards, is devised. The system provides high performance for measurement speed, resolution, and accuracy. Its lightweight, portable, and economical design brings about a prevalence of availability for medium- and small-scale electromechanical manufacturers.

Özet

High-voltage impulses (HVIs) are produced under laboratory conditions in order to emulate actual internal (switching) and external (lightning, thunderbolt) voltages. HVI resistance tests are essential to meet national and international standards on the production of electromechanical devices and materials, such as switchgears, and transformers that operate under these actual conditions. Accurate measurement of HVI is excessively difficult since the voltage level is so high, while the time parameters are relatively constricted. In this study, a reliable automatic HVI measuring and recording system, which accommodates a series of hardware and software designs in order to satisfy the constraints of the standards, is devised. The system provides high performance for measurement speed, resolution, and accuracy. Its lightweight, portable, and economical design brings about a prevalence of availability for medium- and small-scale electromechanical manufacturers.

🔖

Cite This Article

DEDEOĞLU, S., YILMAZ, S. (2014). Design and implementation of a programmable high-voltage impulse measurement system. Turkish Journal of Electrical Engineering and Computer Science, Cilt: 22 - Sayı: 2, 262–275. https://ajindex.com/articles/188537

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. R. Malewski, A. Dechamplain, “Digital impulse recorder for high voltage laboratories”, IEEE Transactions on Power Apparatus and Systems, Vol. PAS-99, pp. 636–649, 1980. W. Strauss, “Reference standard digital recorder with 200 MS/s -12 bit for H.V. impulse tests”, High Voltage Engineering Symposium, pp. 1226–1229, 1999.
  2. T.R. McComb, J. Kuffel, R. Malewski, K. Schon, “Qualifying an impulse digitizer for measurements in HV impulse tests”, IEEE Transactions on Power Delivery, Vol. 5, pp. 1256–1263, 1990.
  3. A. Claudi, E. Haefely, “Calibration of digital impulse measuring systems”, Proceedings of the IEEE International Symposium on Electrical Insulation, pp. 298–302, 1992.
  4. S. Sato, M. Sasaki, “Resolutions of digital recorder and evaluated impulse voltage waveform parameters”, 8th International Power Engineering Conference, pp. 1278–1281, 2007.
  5. C. Dias, A.A. Vale, “Digital analysis and processing of the high voltage impulse tests results”, Proceedings of the 7th Mediterranean Electrotechnical Conference, pp. 1081–1084, 1994.
  6. H.M. Ryan, High-Voltage Engineering and Testing, London, Institution of Electrical Engineers Publication, 2001.
  7. E. Kuffel, W.S. Zaengl, Kuffel J., High-Voltage Engineering Fundamentals, Toronto, Newnes, 2000.
  8. D. Kind, K. Feser, High-Voltage Test Techniques, New Delhi, Vieweg/SBA Publications, 1999.
  9. H. Schwarz, Megavolts in Cottbus, Essen, ETV, 1999.
  10. N.H. Cavallus, High Voltage Laboratory Planning, Basel, Haefely, 1988.
  11. M.S. Naidu, V. Kamaraju, High-Voltage Engineering, New York, McGraw-Hill, 1995. EN 60060-2,
  12. High-Voltage Test Techniques, Part: 2 Measuring Systems, European Standards, 1994. IEC 60060-1,
  13. High-Voltage Test Techniques, Part: 1 General Definitions and Test Requirements, IEC, 1989.