Journals / Turkish Journal of Electrical Engineering and Computer Science / 2019 / Cilt: 27 - Sayı: 2

Characterization of a high-speed radio-frequency sampling and demultiplexing circuit based on the cascade connection of pin photodiodes

Pages
939–949
Publication Date
2019-04-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results obtained from the theoretical models were compared with the measurements obtained from the 2.5 GS / s sampling circuit connected in cascade with a 1.25 GS / s and a 625MS / s demultiplexing circuit implemented using commercial PIN-PDs.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Herein, we apply theoretical models to characterize the transfer function and frequency response of a complex optoelectronic circuit that comprises a primary ultrafast sampling circuit followed by a cascade connection of \textsl{N} demultiplexing stages.
📊
Key Findings & Data:The successive radio-frequency optoelectronic samplers were based on the cascade connection of positive-intrinsic-negative-photodiodes (PIN-PDs).
💡
Conclusion & Impact:The results obtained from the theoretical models were compared with the measurements obtained from the 2.5 GS / s sampling circuit connected in cascade with a 1.25 GS / s and a 625MS / s demultiplexing circuit implemented using commercial PIN-PDs.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Optoelectronics sampling circuit · PIN photodiode · radio-frequency sampled signal

Abstract

Herein, we apply theoretical models to characterize the transfer function and frequency response of a complex optoelectronic circuit that comprises a primary ultrafast sampling circuit followed by a cascade connection of \textsl{N} demultiplexing stages. The successive radio-frequency optoelectronic samplers were based on the cascade connection of positive-intrinsic-negative-photodiodes (PIN-PDs). We developed a procedure to calculate the principal design parameters that allows us to use optical power for each sampling and demultiplexing stage, such that the circuit can be designed based on the application requirements. The results obtained from the theoretical models were compared with the measurements obtained from the 2.5 GS / s sampling circuit connected in cascade with a 1.25 GS / s and a 625MS / s demultiplexing circuit implemented using commercial PIN-PDs.

🔖

Cite This Article

ANGULO, C. V., HERNANDEZ-FUENTES, I. O., MORALES-CARBAJAL, R., VILLA-ANGULO, R., VİLLA-ANGULO, J. R. (2019). Characterization of a high-speed radio-frequency sampling and demultiplexing circuit based on the cascade connection of pin photodiodes. Turkish Journal of Electrical Engineering and Computer Science, Cilt: 27 - Sayı: 2, 939–949. https://ajindex.com/articles/186775

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...