Journals / Turkish Journal of Chemistry / 2006 / Cilt: 30 - Sayı: 5

A New Flame-Retardant Polyamide Containing Phosphine Oxide and N,N-(4,4-diphenylether) Moieties in the Main Chain: Synthesis and Characterization

Pages
643–651
Publication Date
2006-05-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Furthermore, another polyamide was prepared by the solution polycondensation reaction of N,N-(4,4-diphenylether) bis trimellitimide with 1,4-phenylene diamine, and its flame-retardant behavior was compared to that of the previous one.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A new flame-retardant polyamide containing phosphine oxide moieties in the main chain was synthesized from the solution polycondensation reaction of bis(3-aminophenyl) phenyl phosphine oxide with N,N-(4,4-diphenylether) bis trimellitimide, using thionyl chloride, N-methyl-2-pyrolidone, and pyridine as condensing agents.
📊
Key Findings & Data:This new polymer was obtained in high yield (92%), has high inherent viscosity (0.73 dL/g), and was characterized by elemental analysis, FT-IR spectroscopy, thermal gravimetric analysis (TGA and DTG), and solubility testing.
💡
Conclusion & Impact:Furthermore, another polyamide was prepared by the solution polycondensation reaction of N,N-(4,4-diphenylether) bis trimellitimide with 1,4-phenylene diamine, and its flame-retardant behavior was compared to that of the previous one.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Flame-retardant polymers · phosphine oxide moieties · N-(4

Abstract

A new flame-retardant polyamide containing phosphine oxide moieties in the main chain was synthesized from the solution polycondensation reaction of bis(3-aminophenyl) phenyl phosphine oxide with N,N-(4,4-diphenylether) bis trimellitimide, using thionyl chloride, N-methyl-2-pyrolidone, and pyridine as condensing agents. This new polymer was obtained in high yield (92%), has high inherent viscosity (0.73 dL/g), and was characterized by elemental analysis, FT-IR spectroscopy, thermal gravimetric analysis (TGA and DTG), and solubility testing. Furthermore, another polyamide was prepared by the solution polycondensation reaction of N,N-(4,4-diphenylether) bis trimellitimide with 1,4-phenylene diamine, and its flame-retardant behavior was compared to that of the previous one.

Özet

A new flame-retardant polyamide containing phosphine oxide moieties in the main chain was synthesized from the solution polycondensation reaction of bis(3-aminophenyl) phenyl phosphine oxide with N,N-(4,4-diphenylether) bis trimellitimide, using thionyl chloride, N-methyl-2-pyrolidone, and pyridine as condensing agents. This new polymer was obtained in high yield (92%), has high inherent viscosity (0.73 dL/g), and was characterized by elemental analysis, FT-IR spectroscopy, thermal gravimetric analysis (TGA and DTG), and solubility testing. Furthermore, another polyamide was prepared by the solution polycondensation reaction of N,N-(4,4-diphenylether) bis trimellitimide with 1,4-phenylene diamine, and its flame-retardant behavior was compared to that of the previous one.

🔖

Cite This Article

FAGHIHI, K. (2006). A New Flame-Retardant Polyamide Containing Phosphine Oxide and N,N-(4,4-diphenylether) Moieties in the Main Chain: Synthesis and Characterization. Turkish Journal of Chemistry, Cilt: 30 - Sayı: 5, 643–651. https://ajindex.com/articles/185437

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (26)

  1. M.P. Stevens, Polymer Chemistry: An Introduction, Second Edition,
  2. Oxford University Press (1990).
  3. J.G. Writh, High Performance Polymers: Their Origin and Development, Elsevier, New York, (1986).
  4. J. W. Lyons, The Chemistry and Uses of Fire Retardant, Wiley: New York (1970).
  5. C.F. Cullis and M.M. Hirschler, The Combustion of Organic Polymers, Oxford University Press:
  6. New York (1980).
  7. G.E. Zaikov and S.M. Lomakin, J. Appl. Polym. Sci. 68, 715 (1993).
  8. Y.W. Chen-Yang, C.Y. Yuan, C.H. Li and H.C. Yang, J. Appl. Polym. Sci. 90, 1357 (2003).
  9. W. Weidong and Q.Y. Charles, J. A ppl. Polym. Sci. 90, 1885 (2003).
  10. A. Rosy, J. Polym. Sci. Part A: Polym. Chem. 31, 3187 (1993).
  11. G. Wenjeng, J. Polym. Sci. Part A: Polym. Chem. 30, 819 (1992).
  12. Y.L. Liu, G.H. Hsiue and Y.S. Chiu, J. Polym. Sci. Part A: Polym. Chem. 35, 1769 (1997).
  13. H.J. Kim, J.K. Choi, B.W. Jo, J.H. Chang and R.J. Farris, Korea Polym. J. 6, 84 (1998).
  14. C. Tian, H. Wang, X. Liu, Z. Ma, H. Guo and J. Xu, J. A ppl. Polym. Sci. 89, 3137 (2003).
  15. H. Galip, H. Hasipoglu and G. Gunduz, J. Appl. Polym. Sci. 74, 2906 (1999).
  16. J. Liu, Y. Gao, F. Wang and M. Wu, J. Appl. Polym. Sci. 75, 384 (2000).
  17. T. Kashiwagi, A.B. Morgan, J.M. Antonucci, M.R. Vanlandingham, R.H. Harris, W.H. Award and J.R. Shields, J. A ppl. Polym. Sci. 89, 2072 (2003).
  18. Q. Wu, J. Lu and B. Qu, Polym. Int. 52, 1326 (2003).
  19. L. Ying-Ling, H. Ging-Ho, L. Chin-Wein and C. Yie-Shun, J. Polym. Sci. Part A: Polym. Chem. 35, 1769 (1997).
  20. K.G. Gravalos, J. Polym. Sci. Part A: Polym. Chem. 30, 2521 (1992).
  21. Y.L. Liu, Y.L. Liu, R.J. Jeng and Y.S. Chiu, J. Polym. Sci. Part A: Polym. Chem. 39, 1716 (2001).
  22. R.P. Mateva, R.P. Nadya and V. Dencheva, J. Appl. Polym. Sci., 47, 1185 (1993).
  23. Y.L. Liu, G.H. Hsiue, Y.S. Chiu and R.J. Jeng, J. Appl. Polym. Sci. 61, 1789 (1996).
  24. Z. Ma, W. Zhao, Y. Liu and J. Shi, J. A ppl. Polym. Sci. 63, 1511 (1997).
  25. Kh. Faghihi and M. Hajibeygi, J. A ppl. Polym. Sci. 92, 3447(2004).
  26. L. Ying-Ling, C. Yie-Chan and C. Tsung-Yu, Polym. Inter. 52, 1256 (2003).