Journals / Kent Akademisi / 2026 / Cilt: 19 Sayı: 8

From Industrial Raw Material to Value-Added Gemstone: Enhancing Kaman (Kırşehir) Fluorites Using Resin and Assessing Their Economic Potential

Endüstriyel Ham Maddeden Katma Değerli Süs Taşına: Kaman (Kırşehir) Floritlerinin Reçineyle İyileştirilmesi ve Ekonomik Potansiyelinin Değerlendirilmesi

Meltem Gürbüz(MERSİN ÜNİVERSİTESİ, GÜZEL SANATLAR FAKÜLTESİ, TAKI TASARIMI BÖLÜMÜ)0000-0003-2501-0697
Özge Ak(MERSİN ÜNİVERSİTESİ, FEN BİLİMLERİ ENSTİTÜSÜ, GEMOLOJİ (YL) (TEZLİ))0009-0004-7655-4752
Pages
1–34
Publication Date
2026-10-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Overall, the samples stabilized with Optikon 224 exhibited reduced material loss and a lower tendency for fragmentation during processing.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Fluorite deposits in the Kaman district of Kırşehir, Türkiye, exhibit a remarkable range of colors; however, due to their highly fractured and jointed structure, they are largely utilized as industrial raw materials.
📊
Key Findings & Data:Slices approximately 0.5–1 cm thick were prepared from the samples, and untreated control specimens were compared with specimens stabilized under vacuum using Optikon 224 resin.
💡
Conclusion & Impact:Overall, the samples stabilized with Optikon 224 exhibited reduced material loss and a lower tendency for fragmentation during processing.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:florit · gemoloji · iyileştirme

Abstract

Fluorite deposits in the Kaman district of Kırşehir, Türkiye, exhibit a remarkable range of colors; however, due to their highly fractured and jointed structure, they are largely utilized as industrial raw materials. This study aims to improve the workability of Kaman fluorites through resin-based stabilization and to investigate their potential for use as gemstones. Within the scope of the study, fluorite samples collected from the Kaman region were divided into eight groups based on color, crystal size, host rock characteristics, and fracture density. Slices approximately 0.5–1 cm thick were prepared from the samples, and untreated control specimens were compared with specimens stabilized under vacuum using Optikon 224 resin. Prior to resin application, the samples were cleaned with acetone, heated, and impregnated with the resin under vacuum. Following stabilization, the samples were subjected to cutting, shaping, sanding, and polishing processes. The applications demonstrated that Optikon 224 resin penetrated fracture and broken surfaces, reducing the tendency for disintegration and fragmentation during processing, particularly in samples with high fracture density. Newly developed fractures formed during processing could also be stabilized by reapplication of the resin. A reduction in fracture visibility and the development of a more homogeneous surface appearance in the stabilized samples were also confirmed through comparative examinations using a gemological microscope (gemmoscope). Overall, the samples stabilized with Optikon 224 exhibited reduced material loss and a lower tendency for fragmentation during processing. The findings indicate that the workability of highly fractured Kaman fluorites can be improved through appropriate resin stabilization, thereby enhancing their potential for use as gemstones while preserving their aesthetic properties. This study presents an experimental approach for transforming Kaman fluorites into higher-value products through advanced processing and design applications.

Özet

Kırşehir’in Kaman ilçesindeki florit yatakları, sahip oldukları renk çeşitliliğine karşın yoğun kırık ve çatlak içeren yapıları nedeniyle büyük ölçüde endüstriyel ham madde olarak değerlendirilmektedir. Bu çalışmada, Kaman floritlerinin reçine ile stabilize edilerek işlenebilirliğinin geliştirilmesi ve süs taşı olarak değerlendirilme potansiyelinin araştırılması amaçlanmıştır. Çalışma kapsamında, yöreden temin edilen florit örnekleri renk, kristal boyutu, yan kayaç özellikleri ve çatlak yoğunluğu dikkate alınarak sekiz gruba ayrılmıştır. Örneklerden yaklaşık 0,5-1 cm kalınlığında dilimler hazırlanmış; reçine uygulanmayan kontrol örnekleri ile vakum altında Optikon 224 reçinesiyle stabilize edilen örnekler karşılaştırılmıştır. Reçine uygulaması öncesinde örnekler asetonla temizlenmiş, ısıtılmış ve vakum altında reçine ile doyurulmuştur. Stabilizasyon sonrasında örnekler kesme, şekillendirme, zımparalama ve cilalama işlemlerine tabi tutulmuştur. Uygulamalar sonucunda Optikon 224 reçinesinin çatlak ve kırık yüzeylere nüfuz ederek özellikle yüksek çatlak yoğunluğuna sahip örneklerde işlem sırasında meydana gelen dağılma ve parçalanma eğilimini azalttığı belirlenmiştir. İşleme sırasında oluşan yeni kırıkların da tekrar reçine uygulanmasıyla giderilmiştir. Stabilize edilen örneklerde çatlakların görünürlüğünün azalması ve daha homojen bir yüzey görünümünün oluşması, gemoloji mikroskobu ile yapılan incelemelerde de doğrulanmıştır. Bulgular, yoğun çatlaklı Kaman floritlerinin uygun reçine uygulamalarıyla işlenebilirliğinin artırılabileceğini ve estetik özellikleri korunarak süs taşı olarak değerlendirilme potansiyelinin geliştirilebileceğini göstermektedir. Çalışma, Kaman floritlerinin ileri işleme ve tasarım süreçleri yoluyla daha yüksek katma değerli ürünlere dönüştürülmesine yönelik deneysel bir yaklaşım sunmaktadır.

🔖

Cite This Article

Gürbüz, M., Ak, Ö. (2026). From Industrial Raw Material to Value-Added Gemstone: Enhancing Kaman (Kırşehir) Fluorites Using Resin and Assessing Their Economic Potential. Kent Akademisi, Cilt: 19 Sayı: 8, 1–34. https://doi.org/10.35674/kent.1929271

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (21)

  1. Altuncu, S., (2009). Türkiye Florit Yataklarının Oluşumlarının Karşılaştırmalı İncelenmesi. DoktoraTezi, İstanbul Üniversitesi Fen Bilimleri Enstitüsü, İstanbul, Türkiye.
  2. Boyle, R. (1672). An essay about the origine and virtues of gems. William Godbid. https://archive.org/details/essayaboutorigin00boyl
  3. Ericksson, C., Brum, A.S., Ambrós, W.M., (2021). “An energy-saving method of organic dyeing of agates” Volume 2, https://doi.org/10.1016/j.envc.2020.100019.
  4. Erler, A., Akıman, O., Unan, C., Dalkılıç, B., Geven, A., ve Önen, P. (1991). “Kaman (Kırşehir) ve Yozgat Yörelerinde Kırşehir Masifi Mağmatik Kayaçların Petrolojisi ve Jeokimyası”. Doğa Tr. Journal of Engineering and Environmental Sciences, 15,76-100.
  5. Kara, H., & Dönmez, M. (1990), 1/100000 ölçekli açınsama nitelikli Türkiye Jeoloji Haritaları Serisi Kırsehir-G17 paftası: M.T.A. Enst., Jeoloji Etüdleri Dairesi, Ankara, s.17.
  6. Kaydu Akbudak, İ., Ketenci, D. E., & Gürbüz, M. (2022). “Kaman (Kırşehir-Türkiye) Floritlerinin Mineralojik Ve Gemolojik Özellikleri”. Gümüşhane Üniversitesi Fen Bilimleri Dergisi, 12(4), 1012-1023. https://doi.org/10.17714/gumusfenbil.1005565.
  7. Kammerling, R.C., Koivula, J.I., Kane, R.E., Maddison, P., Shigley, J.E., & Fritsch, E. (1991). Fracture Filling of Emeralds: Opticon and Traditional “Oils”. Gems & Gemology, 27(2), 70–85. DOI: 10.5741
  8. Ketenci, E., (2019). “Kaman (Kırşehir) Floritlerinin Minerolojik-Petrografik İncelenmesi ve Süstaşı olarak Kullanılabilirliği” Kırşehir Ahi Evran Üniversitesi, Fen Bilimleri Enstitüsü İleri Teknolojiler AnaBilim Dalı, Kırşehir, Türkiye.
  9. Ketin, İ., (1963). 1/500.000 ölçekli Türkiye Jeolojisi haritası Kayseri paftası, MTA yayınları, 83. https://www.mta.gov.tr/v3.0/hizmetler/500bas adresinden erişildi.
  10. Krzemnicki, M. S. (2024). Bachelor thesis on fissure filling substances in emeralds. Swiss Gemmological Institute SSEF. https://www.ssef.ch/bachelor-thesis-on-fissure-filling-substances-in-emeralds/
  11. Nassau, K., (1984). ‘The Early History of Gemstone Treatments’. Gems & Gemology, Spring, Vol. 20, No. 1.pp.22-23
  12. Otlu, N., Boztuğ, D., (1998). “The Coexistence of the Silica Oversaturated (Alkos) and Undersaturated Alkaline (ALKUS) Rocks in the Kortundağ and Baranadağ Plutons from the Central Anatolian Alkaline Plutonism, E Kaman/NW Kırşehir, Turkey”, Turkish Journal of Earth Sciences, 7 - 3, pp.241-258.
  13. Pshenichnyi, M.I. (2011). “ Gemstones and technologies of their treatment”. Russ J Gen Chem 81, 1375–1380 https://doi.org/10.1134/S1070363211060429
  14. Sar, A., Rizeli, M.E., Ertürk, M.A., (2023). Florit Oluşumu, Kullanım Alanları ve Ekonomik Önemi (C.Özdemir ve A.Özdemir editör) Doğa Bilimleri ve Matematikte Öncü ve Çağdaş Çalışmalar, Duvar Yayınları, İzmir, s.5-11.
  15. Seymen, İ., (1981). “Kaman (Kırşehir) dolayının Kırşehir masifinin Stratigrafisi ve Metamorfizması”. TJK Bülteni., 24/2, 101-108.
  16. Suthiyuth, R., & Weeramonkhonlert, V. (2016). Hydrophane opal treatment. Gems & Gemology. https://www.gia.edu/gems-gemology/spring-2016-labnotes-hydrophane-opal-treatment
  17. CIBJO. (2022). The gemstone book. CIBJO, The World Jewellery Confederation. https://cibjo.org/wp-content/uploads/2023/01/22-12-22-Official-Gemstone-Book.pdf
  18. Geology In. (2017). Fluorite colors: What color is fluorite. Geology In. https://www.geologyin.com/2017/02/why-fluorite-comes-in-different-colors.html
  19. İstanbul Maden İhracatçıları Birliği (İMİB). (t.y.). Fluorit. İstanbul Maden İhracatçıları Birliği. https://imib.org.tr/maden/fluorit/
  20. Maden Tetkik ve Arama Genel Müdürlüğü (MTA). (t.y.). Türkiye maden yatakları haritaları. Maden Tetkik ve Arama Genel Müdürlüğü. https://www.mta.gov.tr/v3.0/hizmetler/maden-yataklari
  21. Maden Tetkik ve Arama Genel Müdürlüğü (MTA). (t.y.). Fluorit. Maden Tetkik ve Arama Genel Müdürlüğü. https://www.mta.gov.tr/v3.0/bilgi-merkezi/fluorit