Journals / Isı Bilimi ve Tekniği Dergisi / 2026 / Cilt: 46 Sayı: 2

COMPARATIVE ANALYSIS OF HEAT TRANSFER COEFFICIENT AND HEAT FLUX IN COMBUTION CHAMBER OF DIESEL ENGINE USING DIFFERENT MODELS

DİZEL MOTOR YANMA ODASINDA ISI TAŞINIM KATSAYISI VE ISI AKISININ FARKLI MODELLERLE KARŞILAŞTIRMALI ANALİZİ

Ali Şanlı(SAKARYA UYGULAMALI BİLİMLER ÜNİVERSİTESİ)0000-0002-7965-5637
Pages
260–267
Publication Date
2026-10-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the Eichelberg model predicts lower and later HTC values compared to the other models, with peak values ranging between 1588,4 and 1639,7 W/m²K.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Heat transfer occurring in the combustion chamber of internal combustion engines is of critical importance for engine performance, as well as cooling and lubrication systems.
📊
Key Findings & Data:The analyses were carried out within the engine speed range of 1600–2000 rpm under constant load conditions.
💡
Conclusion & Impact:The results showed that the Eichelberg model predicts lower and later HTC values compared to the other models, with peak values ranging between 1588,4 and 1639,7 W/m²K.
🔬Design:Modeling & Simulation
📍Scope:2000 Verileri
⚙️Variables:Isı geçişi · ısı taşınım katsayısı · motor devir sayısı

Abstract

Heat transfer occurring in the combustion chamber of internal combustion engines is of critical importance for engine performance, as well as cooling and lubrication systems. Various empirical correlations that allow the complex in-cylinder flow and heat transfer processes to be modeled with practical and acceptable accuracy are widely preferred in engine combustion analyses. In this study, the heat transfer between the combustion gases and the combustion chamber walls in a diesel engine equipped with a common-rail system was investigated using experimental data and empirical models. The analyses were carried out within the engine speed range of 1600–2000 rpm under constant load conditions. The Woschni, Hohenberg, and Eichelberg models were used to determine the heat transfer coefficient (HTC). The results showed that the Eichelberg model predicts lower and later HTC values compared to the other models, with peak values ranging between 1588,4 and 1639,7 W/m²K. The Hohenberg and Woschni models produced similar results, with HTC values in the range of 2121.2–2607.2 W/m²K. Heat flux results exhibited a similar trend; values were obtained in the ranges of 2,3–2,51 MW/m², 2,38–2,81 MW/m², and 2,73–2,83 MW/m² for the Eichelberg, Hohenberg, and Woschni models, respectively. As the engine speed increased, in-cylinder pressure and temperature also increased, leading to intensified heat transfer. The crank angles at which the maximum heat transfer occurred varied depending on the model, and were found to be in the range of 20–25° crank angle after top dead center.

Özet

İçten yanmalı motorlarda yanma odasında gerçekleşen ısı transferi, motor performansı, soğutma ve yağlama sistemleri açısından kritik öneme sahiptir. Silindir içi karmaşık akış ve ısı transferi süreçlerinin pratik ve kabul edilebilir doğrulukta modellenmesine olanak sağlayan çeşitli ampirik bağıntılar, motor yanma analizlerinde yaygın şekilde tercih edilmektedir. Bu çalışmada, common-rail sistemine sahip bir dizel motorda yanma gazları ile yanma odası duvarları arasındaki ısı transferi, deneysel veriler ve ampirik modeller kullanılarak incelenmiştir. Analizler, 1600–2000 dev/dak aralığında ve sabit yük altında gerçekleştirilmiştir. Isı taşınım katsayısının (ITK) belirlenmesinde Woschni, Hohenberg ve Eichelberg modelleri kullanılmıştır. Sonuçlar, Eichelberg modelinin diğer modellere kıyasla daha düşük ve daha geç ITK değerleri öngördüğünü ve pik değerlerin 1588,4–1639,7 W/m²K aralığında değiştiğini göstermiştir. Hohenberg ve Woschni modelleri ise birbirine yakın sonuçlar üretmiş olup ITK değerleri 2121,2–2607,2 W/m²K aralığında belirlenmiştir. Isı akısı sonuçları ise birbirine yakın sonuçlar göstermiş; Eichelberg, Hohenberg ve Woschni modelleri için sırasıyla 2,3–2,51 MW/m², 2,38–2,81 MW/m² ve 2,73–2,83 MW/m² aralıklarında değerler elde edilmiştir. Motor devrinin artmasıyla birlikte silindir içi basınç ve sıcaklık artmış, buna bağlı olarak ısı transferi şiddetlenmiştir. En yüksek ısı transferinin meydana geldiği krank açıları modellere göre değişmekte olup üst ölü noktadan sonra 20-25o krank açısı aralığında oluşmuştur.

🔖

Cite This Article

Şanlı, A. (2026). COMPARATIVE ANALYSIS OF HEAT TRANSFER COEFFICIENT AND HEAT FLUX IN COMBUTION CHAMBER OF DIESEL ENGINE USING DIFFERENT MODELS. Isı Bilimi ve Tekniği Dergisi, Cilt: 46 Sayı: 2, 260–267. https://doi.org/10.47480/isibted.1933285

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (22)

  1. Borman, G., & Nishiwaki K. (1987). Internal combustion engine heat transfer. Progress in Energy and Combustion Science, 13, 1-46. 10.1016/0360-1285(87)90005-0
  2. Broatch, A., Olmeda, P., Margot, X., & Escalona, J. (2019). New approach to study the heat transfer in internal combustion engines by 3D nodelling. Int. J. Therm. Scien.138, 405-415. 10.1016/j.ijthermalsci.2019.01.006
  3. Cho, S., Song, C., Kim, N., Oh, S., Han, D., Min, K. (2021). Influence of the wall temperatures of the combustion chamber and intake ports on the charge temperature and knock characteristics in a spark-ignited engine. Applied Thermal Engineering, 182, 116000. 10.1016/j.applthermaleng.2020.116000
  4. Climent, H., Tiseira, A., Soriano, J. G., & Darbhamalla, A. (2023). In-cylinder heat transfer model proposal compatible with 1D simulations in uniflow scavenged engines. Applied Sciences, 13(6), 3996. https://doi.org/10.3390/app13063996
  5. Dabbaghi, M. F., Baharom, M. B., Abdul Karim, Z. A., Aziz, A. R. A, Muhammed, S. E., & Zainal, E. Z. A. (2021). Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60(3), 2963-2978. https://doi.org/10.1016/j.aej.2021.01.035
  6. Depcik, C., Alam, S. S., Madani, S., Ahlgren, N., McDaniel, E., Burugupally, S. P., & Hobeck, J. D. (2023) Determination of a heat transfer correlation for small internal combustion engines. Applied Thermal Engineering, 228, 120524. 10.1016/j.applthermaleng.2023.120524
  7. Eichelberg, G. (1939). Some new investigations on old combustion engine problems. Engineering, 148(1-2), 446-463.
  8. Enomoto, Y., Aoki, Y., Ei, M., & Kimura, S. (2014). Heat transfer coefficient on the combustion chamber wall surfaces in a naturally aspirated direct-injection diesel engine. International Journal of Engine Research 15(5), 606-625. https://doi.org/10.1177/1468087413500060
  9. Han, S. B., Chung, Y. J., Kwon, Y. J. & Lee, S. (1997) Empirical Formula for Instantaneous Heat Transfer Coefficient in Spark Ignition Engine, Society of Automotive Engineering Technical Paper. https://doi.org/10.4271/972995
  10. Heywood, J. B. (1988). Internal Combustion Engine Fundamentals, McGraw Hill International. 26-0943-26–0943.
  11. Hohenberg, G. F. (1979). Advanced approaches for heat transfer calculations. Society of Automotive Engineering Technical Paper. https://doi.org/10.4271/790825
  12. Hou, S. S. (2004). Heat transfer effects on the performance of an air standard dual cycle. Energy Convers. Manag. 45(18-19), 3003-3015. https://doi.org/10.1016/j.enconman.2003.12.013
  13. Incropera, F. P., & Dewitt, D. P. (1996). Introduction to Heat Transfer. (3rd ed.) John Wiley & Sons: New York, NY, USA.
  14. Przybyła, G., Postrzednik, S., & Żmudka, Z. (2015). The heat transfer calculations of internal combustion engine fuelled with natural gas. Advances in Mechanical and Materials Engineering, 32 (291 (1), 71-80. https://doi.org/10.7862/rm.2015.8
  15. Rakopoulos, C. D., Antonopoulos, K. A., Rakopoulos, D. C., & Giakoumis, E. G. (2004). Investigation of the temperature oscillations in the cylinder walls of a diesel engine with special reference to the limited cooled case. International Journal of Energy Research, 28, 977-1002. https://doi.org/10.1002/er.1008
  16. Sanli, A., Sayin, C., Gumus, M., Kilicaslan, I., & Canakci, M. (2009). Numerical evaluation by models of load and spark timing effects on the in-cylinder heat transfer of a SI engine. Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 56(5), 444-458. https://doi.org/10.1080/10407780903244312
  17. Sanli, A., Ozsezen, A. N., Kilicaslan, I., & Canakci, M. (2008). The influence of engine speed and load on the heat transfer between gases and in-cylinder walls at fired and motored conditions of an IDI diesel engine. Applied Thermal Engineering, 28(11-12), 1395-1404. 10.1016/j.applthermaleng.2007.10.005
  18. Şanlı, A., & Gümüş, M. (2022). Farklı sıkıştırma oranı ve motor momentlerinde direkt püskürtmeli bir dizel motorun yanma odasında ısı geçişinin incelenmesi. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 28(1), 91-103. DOI: 10.5505/pajes.2021.20599
  19. Şanlı, A. (2009). Bir Dizel Motorda Silindir İçi Isı Transferinin İncelenmesi (Yüksek Lisans tezi). Kocaeli Üniversitesi, Kocaeli.
  20. Tan, D., Chen, Z., Li, J., Luo, J., Yang, D., Cui, S. & Zhang, Z. (2021). Effects of Swirl and Boiling Heat Transfer on the Performance Enhancement and Emission Reduction for a Medium Diesel Engine Fueled with Biodiesel. Processes, 9(3), 568. https://doi.org/10.3390/pr9030568
  21. Torregosa, A. J., Broatch, A., Olmeda, P., Salvador-Iborra, J., & Warey, A. (2017). Experimental study of the influence of exhaust gas recirculation on heat transfer in the firedeck of a direct injection diesel engine. Energy Convers. Manage. 153, 304-312. https://doi.org/10.1016/j.enconman.2017.10.003
  22. Woschni, G. (1967). A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. Society of Automotive Engineering Technical Paper. https://doi.org/10.4271/670931