SavedAdd your journal

Journals / Kastamonu Üniversitesi Orman Fakültesi Dergisi / 2019 / Cilt: 19 - Sayı: 3

Comparison of Some Physical and Mechanical Properties of Waterborne Acrylic Coating Systems Containing Commercial UV Absorbers and Tree Bark Extracts

Ticari UV Absorber ve Ağaç Kabuk Ektraktı İçeren Su Bazlı Akrilik Yüzey Koruyucu Sistemlerin Bazı Fiziksel ve Mekanik Özelliklerinin Karşılaştırılması

Özlem ÖZGENÇ
Süleyman KUŞTAŞ
Sefa DURMAZ
Pages
310–316
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Highlights: The dry-film thickness and adhesion strength of waterborne acrylic coatings on wood substrate seem to be affected by addition of tree bark extracts.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aim of study: The aim of this study was to compare solid content, dry film thickness, and adhesion strength of different tree bark extract based and a commercial UV absorber.
📊
Key Findings & Data:Materials and methods: Waterborne acrylic-based coating systems containing 5 different tree bark extracts (maritime pine, Calabrian pine, black pine, alder, fir) and a commercial UV absorber (Tinuvin 400 DW) were applied to 2 different wood species; Scots pine (Pinus sylvestris L.) and beech (Fagus orientalis L.).
💡
Conclusion & Impact:Highlights: The dry-film thickness and adhesion strength of waterborne acrylic coatings on wood substrate seem to be affected by addition of tree bark extracts.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Akrilik Yüzey Maddesi · Yapışma Direnci · Kuru Film Kalınlığı

Abstract

Aim of study: The aim of this study was to compare solid content, dry film thickness, and adhesion strength of different tree bark extract based and a commercial UV absorber. Materials and methods: Waterborne acrylic-based coating systems containing 5 different tree bark extracts (maritime pine, Calabrian pine, black pine, alder, fir) and a commercial UV absorber (Tinuvin 400 DW) were applied to 2 different wood species; Scots pine (Pinus sylvestris L.) and beech (Fagus orientalis L.). The dry-film thicknesses of the coatings were measured with light microscopy. The adhesion strength of the coatings was determined to investigate the bonding ability of the coatings with wood surfaces. The solid contents of the coatings were also determined. Main results: Permeability is an important parameter for dry-film thickness and adhesion strength. Wood species also influenced the dry-film thickness as well as adhesion strength. The dry-film thicknesses of the coatings containing bark extracts were higher than those with commercial UV absorbers. Similarly, the solid content of the coating containing maritime pine bark extract was found to be the highest. Highlights: The dry-film thickness and adhesion strength of waterborne acrylic coatings on wood substrate seem to be affected by addition of tree bark extracts.

Özet

Çalışmanın amacı: Bu çalışmanın amacı su bazlı yüzey koruyucu sistemlerin bazı fiziksel ve mekanik özelliklerinin incelenmesidir. Materyal ve yöntem: 5 farklı ağaç türü (göknar, kızılçam, karaçam, kızılağaç, sahil çamı) ve UV absorber (Tinuvin 400 DW) içeren su bazlı akrilik reçine yüzey koruyucu sistemleri 2 farklı ağaç türüne; sarıçam (Pinus sylvestris L.) ve kayın (Fagus orientalis L.) uygulanmıştır. Kuru film kalınlıkları ışık mikroskobu ile ölçülmüştür. Yüzey koruyucuların yüzey ile bağlanma yeteneklerini incelemek amacıyla yapışma direnci belirlenmiştir. Ayrıca yüzey koruyucuların katı madde miktarları da belirlenmiştir. Sonuçlar: Geçirgenlik, kuru film kalınlığı ve adezyon direnci için önemli bir parametredir. Aynı zamanda odun türü de kuru film kalınlığı ve adezyon direncini etkilemektedir. Kabuk ekstraktı içeren yüzey koruyucuların kuru film kalınlıkları ticari UV absorver içerenlerden daha yüksek bulunmuştur. Benzer şekilde, en yüksek katı madde miktarı sahil çamı ekstraktı içeren yüzey koruyucuda bulunmuştur. Önemli vurgular: Su bazlı akrilik yüzey maddelerinin kuru film kalınlığı ve adezyon direncinin ahşap malzemeler üzerinde önemli etkileri vardır.

🔖

Cite This Article

ÖZGENÇ, Ö., KUŞTAŞ, S., DURMAZ, S. (2019). Comparison of Some Physical and Mechanical Properties of Waterborne Acrylic Coating Systems Containing Commercial UV Absorbers and Tree Bark Extracts. Kastamonu Üniversitesi Orman Fakültesi Dergisi, Cilt: 19 - Sayı: 3, 310–316. https://ajindex.com/articles/166828

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. ASTM, D. (2002). 4541, Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers. Annual Book of ASTM Standards, 1-13.
  2. Bardage, S.L. & Bjurman, J. (1998). Adhesion of waterborne paints to wood. Journal of Coatings Technology, 70(78), 39-47.
  3. Bulian, F. & Graystone, J.A. (2009). Wood coatings: Theory and Practice. Oxford: Elsevier. Decker, C., Masson, F. & Schwalm, R. (2004). Weathering Resistance of Water-Based UV-Cured Polyurethane-Acrylate Coatings. Polymer Degradation and Stability, 83, 309-320. EN ISO 2808 (2007) Paints and varnishes—determination of film thickness. Evans, P.D.&Chowdhury M.J. (2010). Photostabilization of wood with higher molecular weight UV absorbers. In 41st Annual Meeting Of The International Research Group On Wood Protection, Biarritz, France. Feist W.C. & Hon D.N.-S. (1984). In: Rowell R. M., Ed. “The Chemistry of solid wood”, Chapter 11: Chemistry of weathering and protection. advances in chemistry series 207, Washington, Dc: American Chemical- Society. Feist, W.C. (1990). Weathering performance of painting wood pretreated with water-repellent preservatives. Forest Products Journal, 40(7/8), 21-26.
  4. Gindl M., Reiterer A., Sinn G. & Stanzl-Tschegg S.E. (2004). Effects of surface ageing on wettability, surface chemistry, and adhesion of wood, Holz als Roh- und Werkstoff, 62 (4), 273-280.
  5. Grüll, G., Tscherne, F., Spitaler, I. & Forsthuber, B. (2014). Comparison of wood coating durability in natural weathering and artificial weathering using fluorescent UV-lamps and water. European Journal of Wood and Wood Products, 72(3), 367-376. Kılıç A.&Hafızoğlu H. (2007). Açık hava koşullarının ağaç malzemenin kimyasal yapısında meydana getirdiği değişimler ve alınacak önlemler. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi, A(2), 175-183
  6. Kim, Y.S. (2018). Current researches on the protection of exterior wood from weathering, Journal of The Korean Wood Science and Technology, 46(5), 449-470.
  7. Kocaefe, D. & Saha S. (2012). Comparison of the protection effectiveness of acrylic polyurethane coatings containing bark extracts on three heat-treated North American wood species: Surface Degradation. Applied Surface Science, 258, 5283-5290. Kúdela J. & Liptáková E. (2006). Adhesion of coating materials to wood, Journal of Adhesion Science and Technology, 20 (8), 875-895.
  8. Olsson S., Johansson M., Westin M. & Östmark E. (2012). Grafting of 2-hydroxy-4(2,3-epoxypropoxy)-benzophenone and epoxidized soybean oil to wood: Rea