SavedAdd your journal

Journals / Karaelmas Fen ve Mühendislik Dergisi / 2019 / Cilt: 9 - Sayı: 1

Thermo Hydraulic and Economic Optimization of Double Pipe Heat Exchangers

Çift Borulu Isı Değiştiricilerinin Termo Hidrolik ve Ekonomik Optimizasyonu

Murtaza YILDIRIM
MEHMET SAİT SÖYLEMEZ
Pages
101–106
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The validity of the optimization formulations was checked with realistic applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A multi variable thermo economic and hydraulic optimization analysis is presented yielding simple algebraic formula for estimating the optimum area of counter flow tubular heat exchangers of both fluids unmixed type which are applied in industrial applications.
📊
Key Findings & Data:An economic analysis method is used in the present study, together with the thermal and fluidic analyses of such heat exchangers, for thermal, economic and hydraulic optimization.
💡
Conclusion & Impact:The validity of the optimization formulations was checked with realistic applications.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Zıt alışlı ısı değiştirici · Optimizasyon · Termo ekonomik

Abstract

A multi variable thermo economic and hydraulic optimization analysis is presented yielding simple algebraic formula for estimating the optimum area of counter flow tubular heat exchangers of both fluids unmixed type which are applied in industrial applications. An economic analysis method is used in the present study, together with the thermal and fluidic analyses of such heat exchangers, for thermal, economic and hydraulic optimization. The validity of the optimization formulations was checked with realistic applications.

Özet

Endüstriyel uygulamalarda kullanılan karşı akışlı, boru tipi, iki akışkanın karışmadığı tür ısı değiştiricilerinin optimum alan hesabı için basit cebirsel formül veren çok değişkenli termo ekonomik ve hidrolik optimizasyon analizi sunulmaktadır. Bu çalışmada, termal, ekonomik ve hidrolik optimizasyon için bu tür ısı değiştiricilerinin termal ve akışkan analizleri ile birlikte bir ekonomik analiz yöntemi kullanılmıştır. Optimizasyon formülasyonlarının geçerliliği gerçekçi uygulamalarla kontrol edilmiştir

🔖

Cite This Article

YILDIRIM, M., SÖYLEMEZ, M. S. (2019). Thermo Hydraulic and Economic Optimization of Double Pipe Heat Exchangers. Karaelmas Fen ve Mühendislik Dergisi, Cilt: 9 - Sayı: 1, 101–106. https://ajindex.com/articles/166799

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Burmeister, LC. 1998. Equipment cost estimation. In Elements of Thermal-Fluid System Design, Prentice Hall: New Jersey; 263-270.
  2. Chung K., Lee K., Kim, W. 2002. Optimization of the design factors for thermal performance of a parallel-flow heat exchanger. Int. J. Heat Mass. Transf., 45(24): 4773-4780.
  3. Cornellissen, RL., Hirs, GG. 1999. Thermodynamic optimization of a heat exchanger. Int. J. Heat Mass Transf., 42(5): 951-959.
  4. Duffie, JA., Beckman, WA. 1980. Solar process economics. In Solar Engineering of Thermal Processes, Wiley: New York; 376-407.
  5. Edwards, DK., Matavosian, R. 1982. Thermoeconomically optimum counter flow heat exchanger effectiveness. J. Heat Trans-T Asme., 104(1): 191-193.
  6. Georgiadis, MC., Rotstein, GE., Macchietto, S. 1998. Optimal design and operation of heat exchangers under milk fouling. AIChE J., 44(9): 2099-2111.
  7. Grazzini, G., Rinaldi, R. 2001. Thermodynamic optimal design of heat exchangers for an irreversible refrigerator. Int J Therm Sci. 40(2): 173-180.
  8. Ibarra-Bahena, J., Romero, RJ., Velazquez-Avelar, L., Valdez- Morales, CV., Galindo-Luna, YR. 2013. Evaluation of the thermodynamic effectiveness of a plate type heat exchanger integrated into an experimental single stage heat transformer operating with Water/Carrol mixture. Exp. Therm. Fluid Sci., 51(2): 257-263.
  9. Kandilli, C., Koçlu, A. 2011. Assessment of the optimum operation conditions of a pate heat exchanger for waste heat recovery in textile industry. Renew. Sustainable Energy Rev., 15: 4424-4431.
  10. Stoecker, WF. 1989. Design of Thermal Systems, 3rdEdn, Mc Graw-Hill: New York; 468. Şahin, AZ. 1997. Thermodynamic design optimization of a heat recuperator. Int. Commun. Heat Mass, 24(7): 1029-1938.
  11. Vojtech, T., Hajek, J., Jegla, Z., Stehlik, P. 2011. Optimum design of fluid distribution systems in heat exchangers. Asia- pac J. Chem. Eng., 6(5): 750-759.
  12. Wang, CC., Lee, CJ., Chang, T., Lin, SP. 2011. Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers. Int. J. Heat Mass Transf., 42: 1945-1956.
  13. Wu, SY, Zhou, SM, Xiao, L., Li, YR. 2014. Determining the optimal pinch point temperature difference of evaporator for waste heat recovery. J. Energy Inst., 87: 140-151.