AI Summary & Key Takeaways
AI InsightThe results indicate that all properties except cavitation resistance were better in the build-up direction than in the x-y direction.
📌 3 Key Takeaways
Abstract
The Wire Arc Additive Manufacturing (WAAM) can produce parts that closely approximate the desired geometric shape while reducing costs. Although numerous papers have been published on WAAM manufacturing of different aluminium alloys , there are few studies on the directionality of production. In the present study, WAAM was performed using Cold Metal Transfer (CMT) welding equipment was used to produce sample parts with AlSi5 welding wire. Samples of these parts were produced to determine the mechanical, corrosion and wear properties of build-up and x-y directions. The results indicate that all properties except cavitation resistance were better in the build-up direction than in the x-y direction.
Özet
Tel Ark Eklemeli İmalat (WAAM), istenilen geometrik şekle yakın parçaların düşük maliyetle üretilmesini sağlayan bir yöntemdir. Farklı alüminyum alaşımlarının WAAM yöntemiyle üretilmesine yönelik birçok çalışma yapılmış olsa da, üretim yönüne bağlı özellikler üzerine yapılan araştırmalar sınırlıdır. Bu çalışmada, Soğuk Metal Transfer (CMT) kaynak ekipmanı kullanılarak AlSi5 kaynak teli ile numune parçalar üretilmiştir. Bu parçalardan hazırlanan örnekler, katman yönü (yapı yönü) ve x-y düzlemi yönünde mekanik, korozyon ve aşınma özelliklerini belirlemek amacıyla test edilmiştir. Bulgulara göre, kavitasyon direnci dışında tüm özelliklerin yapı yönünde x-y düzlemine göre daha iyi olduğu görülmüştür.