The results showed that particle size decreased and amorphization in the ore structure was occured with increment of the ball-to-mass ratio.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, lateritic nickel ore was activated mechanically in a planetary mill for different ball-to-mass ratios and the changes in the ore structure and thermal behavior of the ore were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), particle size analysis and thermal analysis (TG-DTA).
📊
Key Findings & Data:The results showed that particle size decreased and amorphization in the ore structure was occured with increment of the ball-to-mass ratio.
💡
Conclusion & Impact:The transformation of goethite to hematite in thermal behavior of laterite started to occur during mechanical activation
In this study, lateritic nickel ore was activated mechanically in a planetary mill for different ball-to-mass ratios and the changes in the ore structure and thermal behavior of the ore were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), particle size analysis and thermal analysis (TG-DTA). The results showed that particle size decreased and amorphization in the ore structure was occured with increment of the ball-to-mass ratio. The transformation of goethite to hematite in thermal behavior of laterite started to occur during mechanical activation
Tunç, T., Yıldız, K. (2016). Effects of ball-to-mass ratio during mechanical activation on the structure and thermal behavior of Turkish lateritic nickel ore. TOJSAT, Volume: 3 Issue: 3. https://ajindex.com/articles/1660342
Apaydin, F., Atasoy, A., Yildiz, K., (2011) Effect of mechanical activation on carbotermal reduction of chromite with graphite, Canadian Met. Quarterly, 50(2), (pp.113-118)
Balaz, P. (2000) Extractive Metallurgy of Activated Minerals, Amsterdam, Elsevier.
Balaz, P. (2008) Mechanochemistry in Nanoscience and Minerals Engineering, Berlin, Springer-Verlag Brandt, N.W. (1998), Nickel Laterites: Classification and Features, Journal of Australian Geology and Geophysics, 17(4), (pp.81-88)
Büyükakıncı, T.,(2008) Extraction of nickel from lateritic ores, MSc Thesis, METU, (pp.12-15)
German, R.M. (2007) Toz Metalurjisi ve Parçacıklı Malzeme İşlemleri, edited by S.Sarıtaş, M.Türker and N.Durlu, Türk Toz Metalurjisi Derneği Yayınları: 05, Ankara, (pp.39)
King, M.G. (2005) Nickel laterite technology – Finally a new dawn?, Journal of Metals, (pp.35-39), July.
O’Connor, F., Cheung, W.H., Valix, M. (2006) Reduction roasting of limonite ores: Effect of dehydroxylation, Int. J. Mineral Processing, 80, (pp.88-99)
Roorda, H.J., Queneau, P.E., (1973) Recovery nickel and cobalt from ilmenites by aqueous chlorination by sea water,
Trans. Inst. Min. Metal. (Sec. C: Mineral Process. Extr. Metall.), 82, (pp.79-87)
Tromans, D., Meech, J.A. (2001) Enhanced dissolution of minerals: stored energy, amorphism and mechanical activation, Minerals Eng. 14(11), (pp.1359-1377)
Tunç, T., Yıldız, K. (2012a) Effect of mechanical activation on the thermal decomposition of lateritic nickel ore, 16th International Metallurgy and Materials Congress, 13-15 Sept., Istanbul
Tunç, T., Apaydın, F., Yıldız, K. (2012b) Effects of mechanical activation on the structure of nickeliferous laterite, 2nd International Advances in Applied Physics & Materials Science Congress, April 26-29, Antalya
Zevgolis, E.N., Zografidis, C., Perraki, T., Devlin, E. (2000) Phase transformations of nickeliferous laterites during preheating and reduction with carbon monoxide, J Anal Therm Calorim 100, (pp.133-139)
German, R.M. (2007) Toz Metalurjisi ve Parçacıklı Malzeme İşlemleri, edited by S.Sarıtaş, M.Türker and N.Durlu, Türk Toz Metalurjisi Derneği Yayınları: 05, Ankara, (pp.39)