Journals / TOJSAT / 2026 / Volume: 3 Issue: 2

De-inking paper sludge requirement of liming high acidic potato soil

Journal
TOJSAT
Pages
—
Publication Date
2016-07-23
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results indicate that the amounts of DPS required varied from 4.0 to 8.2 dry Mg DPS ha-1 for attaining pH 5.2 and from 7.6 to 15.2 dry Mg DPS ha-1for attaining pH 5.5.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Biosolids from de-inking processes are increasingly being used in Quebec (Canada) to improve acid soil.
📊
Key Findings & Data:The objective of this study is to determine the optimum rates of de-inking paper sludge (DPS) for attaining target soil pH values of 5.2 and 5.5 for potato grown on podzolic soil.
💡
Conclusion & Impact:Results indicate that the amounts of DPS required varied from 4.0 to 8.2 dry Mg DPS ha-1 for attaining pH 5.2 and from 7.6 to 15.2 dry Mg DPS ha-1for attaining pH 5.5.
🔬Design:Article
📍Scope:Comprehensive Sample
⚙️Variables:Liming materials · Soil amendment · Soil acidity

Abstract

Biosolids from de-inking processes are increasingly being used in Quebec (Canada) to improve acid soil. The objective of this study is to determine the optimum rates of de-inking paper sludge (DPS) for attaining target soil pH values of 5.2 and 5.5 for potato grown on podzolic soil. Incubation experiment was conducted during 18 weeks with a coarse textured soil (pH 4.8) and increasing rates of CaCO3 or DPS. Results indicate that the amounts of DPS required varied from 4.0 to 8.2 dry Mg DPS ha-1 for attaining pH 5.2 and from 7.6 to 15.2 dry Mg DPS ha-1for attaining pH 5.5. The required amount of DPS is proportional to its total CaCO3 equivalent

🔖

Cite This Article

Khiari, L., Merisier, M., Karam, A. (2016). De-inking paper sludge requirement of liming high acidic potato soil. TOJSAT, Volume: 3 Issue: 2. https://ajindex.com/articles/1660317

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Barriga, S., Méndez, A., Càmara, J., Guerrero, F., & Gasco, G. (2010). Agricultural valorisation of de-inking paper sludge as organic amendment in different soils. Thermal study. Journal of Thermal Analysis and Calorimetry, 9, pp. 981–986.
  2. Battaglia, A., Calace N., Nardi, E., Petronio B.M., & Pietroletti, M. (2007). Reduction of Pb and Zn bioavailable forms in metal polluted soils due to paper mill sludge addition: effects on Pb and Zn transferability to barley. Bioresource Technology, 98 pp. 2993–2999.
  3. BNQ, Bureau de Normalisation du Québec. (2005). Inorganic soil conditioners- Liming materials from industrial processes. 2nd ed. Standard BNQ0419-090/2005. Québec.
  4. Beauchamp, C.J., Charest, M.-H. & Gosselin, A. (2002). Examination of environmental quality of raw and composting de-inking paper sludge. Chemosphere, 46, pp. 887–895.
  5. Chantigny, M.H., Angers, D.A., & Beauchamp, C.J. (1999). Aggregation and organic matter decomposition in soils amended with de-inking paper sludge. Soil Science Society of America Journal, 63, pp. 1214–1221.
  6. Charest, M.H. & Beauchamp, C.J. (2002). Composting of de-inking paper sludge with poultry manure at three nitrogen levels using mechanical turning: behavior of physico-chemical parameters. Bioresource Technology, 81, pp. 7–17.
  7. CRAAQ. (2010). Guide de référence en fertilisation, 2ème ed. Centre de Référence en Agriculture et AgroAlimentaire du Québec.
  8. Fierro, A., Norrie J., Gosselin A. & Beauchamp C.J. (1997). Deinking sludge influences biomass, nitrogen and phosphorus status of several grass and legume species. Canadian Journal of Soil Science, 77, pp. 693– 702.
  9. MDDEP. (2010). Bilan 2010 du recyclage des matières résiduelles fertilisantes, Ministère du Développement Durable, de l’Environnement et des Parcs http://www.mddep.gouv.qc.ca/matieres/mat_res/fertilisantes/bilan2010.pdf
  10. Soon, Y.K. & Bates, T.E. (1986). Determination of the lime requirement for acid soils in Ontario using the SMP buffer methods. Canadian Journal of Soil Science, 66, pp. 373–376.
  11. Smith, O. 1940. Potato research at Cornell University. American Potato Journal, 17, pp. 27–37.
  12. Tran, T. S. & van Lierop, W. (1982). Lime requirement determination for attaining pH 5.5 and 6.0 of coarsetextured soils using buffer-pH methods. Soil Science. Society of America Journal, 46, pp. 1008–1014.
  13. Webber, M.D., Hoyt, P.B., Nyborg, N. & Corneau, D. (1977). A comparison of lime requirement methods for acid Canadian soils. Canadian Journal of Soil Science.57, pp. 361–370.
  14. Waterer, D. (2002). Impact of high soil pH on potato yields and grade losses to common scab. Canadian Journal of Plant Science, 82, pp. 583–586.