✨
AI Summary & Key Takeaways
AI Insight⚡ TL;DR(Too Long; Didn't Read)
The result showed that the addition of fillers to the composite changed the friction coefficient and wear rate
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In the present work, the friction and wear property of high density polyethylene / styrene - butadiene rubber polymer blends was studied.
📊
Key Findings & Data:SBR addition in the HDPE was 5, 10, 15, and 20 wt.
💡
Conclusion & Impact:The result showed that the addition of fillers to the composite changed the friction coefficient and wear rate
🔬Design:Article
📍Scope:Comprehensive Sample
⚙️Variables:Friction · high density polyethylene · polymer composites
Abstract
In the present work, the friction and wear property of high density polyethylene / styrene - butadiene rubber polymer blends was studied. SBR addition in the HDPE was 5, 10, 15, and 20 wt. In this study indicate that HDPE / SBR polymer applied to the abrasion test indicate that road and load values to increase the effect of wear, but this effect by increasing the rate of SBR additives lead to a reduction in wear is observed that value as %. The result showed that the addition of fillers to the composite changed the friction coefficient and wear rate
🔖
Cite This Article
Ersoy, S. (2016). FRICTION AND WEAR PERFORMANCE OF HIGH DENSITY POLYETHYLENE / STYRENE - BUTADIENE RUBBER POLYMER BLENDS. TOJSAT, Volume: 6 Issue: 2. https://ajindex.com/articles/1660208