Journals / Engineering Sciences / 2026 / Cilt: 4 Sayı: 3

PARAMETER EFFECTS ON SHEAR CAPACITY OF MASONRY WALLS; UNSUPPORTED LENGTH ASPECT

YIĞMA DUVARLARIN KAYMA KAPASİTELERİNİ ETKİLEYEN PARAMETRELER: DESTEKSİZ DUVAR UZUNLUĞU

Pages
240–250
Publication Date
2009-04-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Optimum unsupported masonry wall length should be approximately 1.5m-1.8m according to the results of the analyses.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This paper investigates the effects of the unsupported length parameter on shear behavior of laterally loaded masonry walls.
📊
Key Findings & Data:For this aim, six masonry wall models with different length and with an opening in the middle of the walls are considered for the nonlinear analysis.
💡
Conclusion & Impact:Optimum unsupported masonry wall length should be approximately 1.5m-1.8m according to the results of the analyses.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Yığma Duvar Uzunlukları · Doğrusal Olmayan Analiz · Mikro Modelleme

Abstract

This paper investigates the effects of the unsupported length parameter on shear behavior of laterally loaded masonry walls. For this aim, six masonry wall models with different length and with an opening in the middle of the walls are considered for the nonlinear analysis. During analyses, masonry units are assumed as elastic blocks bonded with inelastic interface elements. All models are assumed as confined masonry, bonded with a horizontal top beam and vertical tie-columns on both vertical sides of opening and also end of the walls. Simplified micro modeling approach is used for the modeling. Besides, the results of the analyses are criticized and compared with code requirements. Optimum unsupported masonry wall length should be approximately 1.5m-1.8m according to the results of the analyses.

Özet

Bu çalışmada, yanal yüklü desteksiz yığma duvar uzunluğunun duvarın kayma davranışındaki etkileri incelenmektedir. Bu amaçla, altı adet farklı uzunlukta ve duvarın ortasında bir pencere boşluğu bulunan yığma duvar modellerine ait doğrusal olmayan analizler değerlendirilmiştir. Analizler esnasında, tuğlalar elastik, tuğlalar arasındaki harcın ise elastik ötesi davranış gösterebildiği kabul edilmiştir. Tüm duvar modelleri sarılmış yığma duvar olarak tasarlanmış, üstte bir yatay hatıl ile duvar köşelerinde ve pencere kenarlarında düşey hatıllar tanımlanmıştır. Modellemeler basitleştirilmiş mikro modelleme yaklaşımı kullanılarak yapılmıştır. Elde edilen sonuçlar yönetmelik koşullarıyla karşılaştırmalı bir biçimde verilmiştir. Gerçekleştirilen analizler ışığında optimum dolu gövdeli yığma duvar uzunluğu 1,5m ile 1,8m arasında olması ideal bir durum olarak ortaya çıkmaktadır.

🔖

Cite This Article

Ural, A. (2009). PARAMETER EFFECTS ON SHEAR CAPACITY OF MASONRY WALLS; UNSUPPORTED LENGTH ASPECT. Engineering Sciences, Cilt: 4 Sayı: 3, 240–250. https://doi.org/10.12739/nwsaes.v4i3.5000067133

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...