SavedAdd your journal

Journals / Sakarya University Journal of Science / 2026 / Volume: 28 Issue: 1

Effect of Adhesion and Corrosion Performance of Geomet Basecoat (321)- Topcoat (ML Black) Applications on Cataphoretic Coating

İbrahim Usta(Sakarya Uygulamalı Bilimler Üniversitesi)0000-0001-7557-9617
Oğuz Yılmaz(Uzman Kataforez Yüzey Kaplama San. ve Tic. A.Ş.)0009-0002-7300-8823
Minel Gül(Uzman Kataforez Yüzey Kaplama San. ve Tic. A.Ş.)0009-0004-5791-4222
Ahmet Can(Uzman Kataforez Yüzey Kaplama San. ve Tic. A.Ş.)0000-0002-0831-021X
Harun Gül(Sakarya Uygulamalı Bilimler Üniversitesi)0000-0002-4589-3506
Pages
—
Publication Date
2024-02-29
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This study will be a contribution to the future of protective coatings in the automotive industry by describing the process steps necessary to achieve optimum results.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study aimed to improve corrosion resistance and adhesion of metallic materials typically used in automotive application.
📊
Key Findings & Data:Firstly, cataphoretic coating was applied and then the coating process was completed with Geomet 321 and ML Black respectively.
💡
Conclusion & Impact:This study will be a contribution to the future of protective coatings in the automotive industry by describing the process steps necessary to achieve optimum results.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Cataphoresis · Geomet · Zinc Lamellar

Abstract

This study aimed to improve corrosion resistance and adhesion of metallic materials typically used in automotive application. A combination of cataphoretic and Geomet coatings has been used to improve corrosion resistance. Firstly, cataphoretic coating was applied and then the coating process was completed with Geomet 321 and ML Black respectively. The results of the corrosion tests were classified into different categories such as adhesion, water resistance, moisture resistance, salt resistance and cyclic tests. The corrosion properties of the two- and three-layer coatings were found to improve as a function of both the sandblast pre-treatment and the post-cataphoresis curing temperature. The findings show that the adhesion strength and corrosion properties of Geomet 321 increases with curing temperature and sandblasting. This study will be a contribution to the future of protective coatings in the automotive industry by describing the process steps necessary to achieve optimum results.

🔖

Cite This Article

Usta, İ., Yılmaz, O., Gül, M., Can, A., Gül, H. (2024). Effect of Adhesion and Corrosion Performance of Geomet Basecoat (321)- Topcoat (ML Black) Applications on Cataphoretic Coating. Sakarya University Journal of Science, Volume: 28 Issue: 1. https://doi.org/10.16984/saufenbilder.1345904

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (52)

  1. G. Koch, “Cost of corrosion,” Trends in oil and gas corrosion research and technologies: Production and transmission, Elsevier Inc., A. M. El-Sherik, 2017, pp. 3–30.
  2. J. Kinugasa, F. Yuse, M. Tsunezawa, M. Nakaya, “Effect of corrosion resistance and rust characterization for hydrogen absorption into steel under an atmospheric corrosion condition,” ISIJ International, vol. 56, pp. 459–464, 2016.
  3. H. Li, Y. He, P. Luo, Y. Fan, H. Yu, Y. Wang, T. He, Z. Li, H. Zhang, “Influence of pulse frequency on Corrosion Resistance and Mechanical Properties of Ni-W/B4C Composite Coatings,” Colloids Surface A Physicochemical Engineering Asp, vol. 629, 127406, 2021.
  4. A. Karadag, E. Duru, M. Uysal, H. Akbulut, “Tribological performance of Ni-W/PTFE composite coating,” vol. 26, no. 4A, pp. 2885–2893, 2022.
  5. H. Gül, M. Uysal, H. Akbulut, A. Alp, “Effect of PC electrodeposition on the structure and tribological behavior of Ni-Al2O3 nanocomposite coatings,” Surface Coating Technology, vol. 258, pp. 1202–1211, 2014.
  6. Y. Yang, L. Qu, L. Dai, T. S. Kang, M. Durstock, “Electrophoresis coating of titanium dioxide on aligned carbon canotubes for controlled syntheses of photoelectronic nanomaterials,” Advanced Materials, vol. 19, no. 9, pp. 1239–1243, 2007.
  7. S. M. A. Shibli, B. N. Meena, R. Remya, “A review on recent approaches in the field of hot dip Zinc Galvanizing process,” Surface Coating Technology, vol. 262, pp. 210–215, 2015.
  8. A. R. Marder, “The metallurgy of Zinc-Coated steel,” Progress in Materials Science, vol. 45, no. 3, pp. 191–271, 2000.
  9. H. Cheng Yu, B. Zhen Chen, X. Shi, X. Sun, B. Li, “Investigation of the Trivalent-Chrome Coating on 6063 Aluminum Alloy,” Materials Letters, vol. 62, no. 17–18, pp. 2828–2831, 2008.
  10. P. K. Sinha, R. Feser, “Phosphate coating on steel surfaces by an electrochemical method,” Surface Coating Technology, vol. 161, no. 2–3, pp. 158–168, 2002.
  11. H. Gul, İ. Usta, “Effect of Alumina Concentration on morphology, wear, and corrosion: Electroless Ni-W-P/Al2O3 composite coatings on aluminum surfaces,” Journal of Materials Engineering and Performance, vol. 32, no. 13, pp. 6107–6122, 2023.
  12. A. López-Ortega, R. Bayón, J. L. Arana, “Evaluation of protective coatings for offshore applications. Corrosion and tribocorrosion behavior in synthetic seawater,” Surface Coating Technology, vol. 349, pp. 1083–1097, 2018.
  13. J. R. Lince, “Effective application of solid lubricants in spacecraft mechanisms,” Lubricants, vol. 8, p. 74, 2020.
  14. H. C. Barshilia, “Surface modification technologies for aerospace and engineering applications: Current trends, challenges and future prospects,” Transactions of the Indian National Academy of Engineering, vol. 6, no. 2, pp. 173–188, 2021.
  15. W. Skotnicki, D. Jędrzejczyk, “The Comparative analysis of the coatings deposited on the automotive parts by the cataphoresis method,” Materials, vol. 14, no. 20, p. 6155, 2021.
  16. M. Doerre, L. Hibbitts, G. Patrick, N. K. Akafuah, “Advances in automotive conversion coatings during pretreatment of the Body Structure: A Review,” Coatings, vol. 8, no. 11, p. 405, 2018.
  17. N. Sorour, W. Zhang, E. Ghali, G. Houlachi, “A review of organic additives in Zinc Electrodeposition process” Hydrometallurgy, vol. 171, pp. 320–332, 2017.
  18. “Home | ZINC. International Zinc Association. (2023, Jul. 17). Zinc essential for modern life [Online]. Available: https://www.zinc.org/
  19. N. Rawal. (2023). The Characteristics, Toxicity and Effects of Cadmium [Online]. Available: https://www.researchgate.net/publication/305778858
  20. R. Ding, S. Chen, J. Lv, W. Zhang, X. Zhao, J. Liu, X. Wang, T. Gui, B. Li, Y. Tang, W. Li, “Study on graphene modified organic anti-corrosion coatings: A comprehensive review,” Journal of Alloys and Compounds, vol. 806, pp. 611–635, 2019.
  21. B. Philip (2011). Evaluation of Corrosion in Crevices in Screw Joints Mats Thörnqvist [Online]. Available: https://www.diva-portal.org/smash/get/diva2:441388/FULLTEXT01.pdf
  22. D. Zhmurkin, “Corrosion Resistance of Bolt Coatings Technical Paper,” Tyco Electronics Harrisburg, PA, pp. 1-7, 2009.
  23. Benseler. (2023). New Dip-Spin System for Zinc Flake Coatings on Rack Parts All-Over Coating [Online]. Available: https://www.benseler.de/en/verfahren/beschichtung/geomet.php
  24. “Geomet Coating. (2023). Keys & Clamps.” [Online]. Available: https://www.keytechno.com/service/geomet-coating/
  25. K. Westphal, “An optimized coating system for fasteners with metric threads,” ATZ Worldwide, vol. 107, no. 5, pp. 8–10, 2005.
  26. R. B. Egêa, A. Primolini, B. I. Da Maia, “Development of friction coefficient controller for E-coat (KTL),” SAE Technical, 2018-36-0200, 2018.
  27. B. Oleksiak, K. Kołtało, R. Poloczek, “Application methods and selected properties of Zinc Flake coatings,” Metalurgija, vol. 60, pp. 162–164, 2021.
  28. M. R. Isa, O. S. Zaroog, M. A. Yunus, V. R. Sanny Bavu, N. Rosmi, “Effect of sandblasting process on mechanical properties of ASTM A516 Grade 70 Steel,” Key Engineering Materials, vol. 765, pp. 222–226, 2018.
  29. A. Rudawska, I. Danczak, M. Müller, and P. Valasek, “The effect of sandblasting on surface properties for adhesion,” International Journal of Adhesion and Adhesives, vol. 70, pp. 176–190, 2016.
  30. B. Herbáth, K. Kovács, M. Jakab, É. Makó, “Crystal structure and properties of Zinc Phosphate Layers on aluminium and steel alloy surfaces,” Crystals, vol. 13, p. 369, 2023.
  31. L. Kwiatkowski, “Phosphate coatings porosity: Review of new approaches,” Surface Engineering, vol. 20, no. 4, pp. 292–298, 2013.
  32. M. Kilinç, L. Akyalcın, “Kataforez kaplamalı çelik yüzeylere uygulanan dubleks kaplamanın korozyon dayanım performansı üzerindeki etkisinin incelenmesi,” Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, vol. 30, pp. 68–78, 2022.
  33. A. Ş. Yargıç, B. Eren, N. Özbay, “Enhancement of coating features by supporting Zinc-Based coating with cataphoresis process: Effect of acidity and coating thickness on the coating Quality,” Journal of Polytechnic, pp. 1, 2023.
  34. Yellow Powder Coating (2023). PPG Powder Coating Colors | PPG Powder Coatings [Online]. Available: https://powdercoatings.ppg.com/products/pctz39104-yellow
  35. S. J. García, J. Suay, “A comparative study between the results of different electrochemical techniques (EIS and AC/DC/AC) application to the optimisation of the cataphoretic and curing parameters of a primer for the automotive industry,” Progress in Organic Coatings vol.59, pp. 251–258, 2007.
  36. S. J. García, M. T. Rodríguez, R. Izquierdo, J. Suay, “Evaluation of cure temperature effects in cataphoretic automotive primers by electrochemical techniques,” Progress in Organic Coatings, vol.60, no.4, pp. 303–311, 2007.
  37. “Cross Hatch Method. (2023). [Online]. Available: https://www.elcometer.com/en/cross-hatch-method
  38. “Adhesion tests (2023). [Online]. Available: https://www.substech.com/dokuwiki/doku.php?id=adhesion_tests
  39. “ASTM D 870: 2002 Standard (2023). Practice for testing water resistance.” [Online]. Available: https://infostore.saiglobal.com/en-us/standards/astm-d870-02-151549_SAIG_ASTM_ASTM_357357/
  40. “MIL-STD-810 Test Method 507 Humidity-Crystal group.” (2023). [Online]. Available: https://www.crystalrugged.com/mil-std-810-test-method-507-humidity/
  41. DIN EN ISO 9227 – (2023) European Standards. [Online]. Available: https://www.en-standard.eu/din-en-iso-9227-corrosion-tests-in-artificial-atmospheres-salt-spray-tests-iso-9227-2022/
  42. SIST EN ISO 9227:2006 – (2023) Corrosion Tests in Artificial Atmospheres - Salt Spray Tests [Online]. Available: https://standards.iteh.ai/catalog/standards/sist/6e82d425-e4fd-4579-a86d-d94eddd1cb36/sist-en-iso-9227-2006
  43. B. Chatterjee, (2017) “Science and industry of processes for Zinc-based coatings with improved properties,” Jahrbuch Oberfl ächentechnik Band, pp 1-30, [Online].Available: https://www.researchgate.net/publication/311793888
  44. L. Zaretskiy, “Modified silicate binders new developments and applications,” International Journal of Metal Casting, vol. 10, no. 1, pp. 88–99, 2016.
  45. L. Zaretskiy, “Modified Silicate Binders New developments and applications,” International Journal of Metal Casting, vol. 10, no. 1, pp. 88–99, 2016.
  46. L. Feng, H. Zhang, “Superhydrophobic aluminium alloy surface: Fabrication, structure, and corrosion resistance,” Physicochemical Engineering Aspects, vol. 441, pp. 319–325, 2014.
  47. B. Tylkowski, I. Tsibranska, “Overview of main techniques used for membrane characterization,” Journal of Chemical Technology and Metallurgy, vol. 50, 1 pp. 3-12, 2015.
  48. M. Mantel, J. P. Wightman, “Influence of the surface chemistry on the wettability of stainless steel,” Surface and Interface Analysis, vol. 21, pp. 595–605, 1994.
  49. A. R. Luz, L. S. Santos, C. M. Lepienski, P. B. Kuroda, “Characterization of the morphology, structure and wettability of phase dependent lamellar and nanotube Oxides on Anodized Ti-10Nb Alloy,” Applied Surface Science, vol. 448, pp. 30–40, 2018.
  50. D. Crotty, “Zinc alloy plating for the automotive industry,” Metal Finishing, vol. 94, pp. 56-58, 1996.
  51. Teknorot (2023). Cataphoresis [Online]. Available: https://www.teknorot.com/en/cataphoresca/
  52. GEOMET® (2023) Protection Principals,. [Online]. Available: www.nofmetalcoatings.com