SavedAdd your journal

Journals / Sakarya University Journal of Science / 2025 / Volume: 29 Issue: 6

Comparative Investigation of the Microstructure, Hardness, and Tribological Properties of Electroless Ni–B Composite Coatings Reinforced with TiO₂ and ZrO₂

Deniz Gültekin(SAKARYA UNIVERSITY)0000-0002-6941-7539
Pages
—
Publication Date
2025-12-23
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These results highlight the potential of TiO₂- and ZrO₂-reinforced Ni–B coatings as sustainable alternatives with improved mechanical and tribological functionality for engineering applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study focuses on the electroless deposition and characterization of Ni–B composite coatings reinforced with TiO₂ and ZrO₂ ceramic particles.
📊
Key Findings & Data:Coatings were deposited on steel substrates using an acidic bath (NiSO₄·6H₂O, DMAB, thiourea, sodium acetate) under controlled conditions (65 ± 3 °C, pH 6, 350 rpm, 45 min) with reinforcement contents of 0 to 15 g/L.
💡
Conclusion & Impact:These results highlight the potential of TiO₂- and ZrO₂-reinforced Ni–B coatings as sustainable alternatives with improved mechanical and tribological functionality for engineering applications.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Electroless Ni–B coatings · Composite · Microstructure

Abstract

This study focuses on the electroless deposition and characterization of Ni–B composite coatings reinforced with TiO₂ and ZrO₂ ceramic particles. Coatings were deposited on steel substrates using an acidic bath (NiSO₄·6H₂O, DMAB, thiourea, sodium acetate) under controlled conditions (65 ± 3 °C, pH 6, 350 rpm, 45 min) with reinforcement contents of 0 to 15 g/L. The coatings were systematically evaluated in terms of morphology, structure, hardness, and tribological performance. Ni–B exhibited the typical nodular morphology, while the incorporation of TiO₂ and ZrO₂ progressively modified surface features. At moderate concentrations, both reinforcements were uniformly dispersed within the matrix, whereas higher contents led to particle clustering and microstructural heterogeneity. XRD confirmed the amorphous–nanocrystalline nature of Ni–B; TiO₂ acted mainly as an inert phase, while ZrO₂ promoted localized crystallization, resulting in harder and more stable structures. Microhardness increased from ~750 HV for plain Ni–B to ~985 HV (TiO₂) and ~1080 HV (ZrO₂) at 10 g/L, with a slight decline at higher loadings due to agglomeration. Tribological tests demonstrated that both reinforcements improved wear resistance and reduced friction, with TiO₂ yielding more stable friction coefficients and ZrO₂ providing superior resistance to material loss. These results highlight the potential of TiO₂- and ZrO₂-reinforced Ni–B coatings as sustainable alternatives with improved mechanical and tribological functionality for engineering applications.

🔖

Cite This Article

Gültekin, D. (2025). Comparative Investigation of the Microstructure, Hardness, and Tribological Properties of Electroless Ni–B Composite Coatings Reinforced with TiO₂ and ZrO₂. Sakarya University Journal of Science, Volume: 29 Issue: 6. https://doi.org/10.16984/saufenbilder.1776359

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (32)

  1. V. B. Chintada, R. Koona, M. V. A. R. Bahubalendruni, “State of art review on nickel-based electroless coatings and materials,” Journal of Bio- and Tribo-Corrosion, vol. 7, no. 4, 2021.
  2. L. Magagnin, “Electroless deposition of Ni–P composite and multilayer coatings: Applications and perspectives,” ECS Meeting Abstracts, vol. MA2020-02(17), p. 1486, 2020.
  3. P. Sahoo, S. K. Das, “Tribology of electroless nickel coatings – A review,” Materials & Design, vol. 32, no. 4, pp. 1760–1775, 2011.
  4. D. Gültekin, E. Duru, H. Akbulut, “Improved wear behaviors of lead-free electroless Ni–B and Ni–B/CeO₂ composite coatings,” Surface and Coatings Technology, vol. 422, p. 127525, 2021.
  5. X. Shu, Z. He, Y. Wang, L. Yin, “Mechanical properties of Ni-based coatings fabricated by electroless plating method,” Surface Engineering, vol. 36, no. 9, pp. 944–951, 2019.
  6. K. S. Correia, L. G. Greca, L. Sopchenski, P. Soares, F. L. Amorim, R. D. Torres, “Strength and deformation properties of low-alloy steel bolts with electroless Ni–P coating: An investigation of two thermal routes,” Journal of Materials Engineering and Performance, vol. 29, no. 9, pp. 6025–6032, 2020.
  7. T. S. N. S. Narayanan, I. Baskaran, K. Krishnaveni, S. Parthiban, “Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance,” Surface and Coatings Technology, vol. 200, no. 11, pp. 3438–3445, 2006.
  8. R. A. Shakoor, R. Kahraman, W. Gao, Y. Wang, “Synthesis, characterization and applications of electroless Ni–B coatings – A review,” International Journal of Electrochemical Science, vol. 11, pp. 2486–2512, 2016.
  9. V. Vitry, F. Delaunois, “Development of electroless Ni–B coatings,” Transactions of the IMF, vol. 93, no. 2, pp. 57–62, 2015.
  10. J. Sudagar, J. Lian, W. Sha, “Electroless nickel, alloy, composite and nano coatings – A critical review,” Journal of Alloys and Compounds, vol. 571, pp. 183–204, 2013.
  11. S. Eraslan, M. Ürgen, “Oxidation behavior of electroless Ni–P, Ni–B and Ni–W–B coatings deposited on steel substrates,” Surface and Coatings Technology, vol. 265, pp. 46–52, 2015.
  12. P. Gadhari, P. Sahoo, “Electroless nickel–phosphorus composite coatings,” International Journal of Manufacturing, Materials, and Mechanical Engineering, vol. 6, no. 1, pp. 14–50, 2016.
  13. M. Yang, Y. Liang, T. Huang, Q. Jin, D. Kong, P. Song, “Oxidation behaviour and properties of carbide ceramic reinforced Ni-based composite coatings at 700 °C,” Ceramics International, vol. 50, no. 20, pp. 37504–37517, 2024.
  14. P. Priyadarshi, P. K. Katiyar, R. Maurya, “A review on mechanical, tribological and electrochemical performance of ceramic particle-reinforced Ni-based electrodeposited composite coatings,” Journal of Materials Science, vol. 57, no. 41, pp. 19179–19211, 2022.
  15. V. Niksefat, M. Ghorbani, “Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of Ni–B–TiO₂ composite coatings,” Journal of Alloys and Compounds, vol. 633, pp. 127–136, 2015.
  16. E. Georgiza, A. Lekatou, D. Sioulas, A. E. Karantzalis, “SiC particle reinforced electroless Ni–B coatings and their tribological performance,” Materials Chemistry and Physics, vol. 186, pp. 534–546, 2017.
  17. S. Mohanty, T. K. Barman, P. Sahoo, “Tribological behavior of TiO₂ reinforced Ni–B coatings,” Coatings, vol. 13, no. 1, p. 145, 2023.
  18. H. Khaira, I. Shown, S. Samireddi, S. Mukhopadhyay, S. Chatterjee, “ZrO₂ reinforced Ni–B composite coatings for enhanced wear resistance,” Journal of Materials Engineering and Performance, vol. 32, no. 2, pp. 1789–1802, 2023.
  19. C. C. Raidu, S. Boominathasellarajan, N. Arunachalam, “Tribological evaluation of ZrO₂ and YSZ nanoparticle reinforced electroless Ni–B coatings,” Ceramics International, vol. 50, no. 9, pp. 15461–15471, 2024.
  20. S. I. Alnassar, H. M. Kadhim, S. R. Hassan, A. K. Mahmoud, A. A. A. G. Alrubaiy, “Synthesis of nano-SiC reinforced nickel-based nanocomposite coating using electroless deposition technique,” Materials Today: Proceedings, 2023.
  21. Y. Zhang, J. Zhang, “Synthesis of Ni, Cu plated nano-Al₂O₃ composite powders and autocatalytic mechanism,” Materials Today Communications, vol. 38, p. 108178, 2024.
  22. F. Bülbül, A. Kara, “Multifunctional electroless nickel boron composite coatings incorporated by magnesium diboride ceramic particles,” International Journal of Ceramic Engineering & Science, vol. 6, no. 6, 2024.
  23. V. Nemane, S. Chatterjee, “Evaluation of microstructural, mechanical, and tribological characteristics of Ni–B–W–SiC electroless composite coatings involving multi-pass scratch test,” Materials Characterization, vol. 180, p. 111414, 2021.
  24. Y. Zhao, W. He, T. Zhang, “Microstructure and mechanical properties of Ni-based nanocomposite coatings: Effect of particle agglomeration,” Journal of Materials Research and Technology, vol. 8, no. 5, pp. 4789–4797, 2019.
  25. G. Pedrizzetti, V. Genova, M. Bellacci, E. Scrinzi, A. Brotzu, F. Marra, G. Pulci, “Influence of deposition temperature and WC concentration on the microstructure of electroless Ni–P–WC nanocomposite coatings with improved hardness and corrosion resistance,” Coatings, vol. 14, no. 7, p. 826, 2024.
  26. G. Jiaqiang, L. Lei, W. Yating, S. Bin, H. Wenbin, “Electroless Ni–P–SiC composite coatings with superfine particles,” Surface and Coatings Technology, vol. 200, no. 20–21, pp. 5836–5842, 2006.
  27. Y. Yang, G. Wu, Y. Li, J. Liu, H. Wang, “Electroless Ni–P/nano-Al₂O₃ composite coatings,” Applied Surface Science, vol. 257, no. 14, pp. 6113–6118, 2011.
  28. D. Ekmekçi, F. Bülbül, “Preparation and characterization of electroless Ni–B/nano-SiO₂, Al₂O₃, TiO₂ and CuO composite coatings,” Bulletin of Materials Science, vol. 38, no. 3, pp. 761–768, 2015.
  29. F. Doğan, M. Uysal, H. Algül, E. Duru, H. Akbulut, S. Aslan, “Optimization of pulsed electro co-deposition for Ni–B–TiN composites and the variation of tribological and corrosion behaviors,” Surface and Coatings Technology, vol. 400, p. 126209, 2020.
  30. E. Duru, F. Doğan, M. Uysal, H. Akbulut, S. Aslan, “Optimization of Ni–B coating bath and effect of DMAB concentration on hardness and wear,” Surfaces and Interfaces, vol. 22, p. 100880, 2021.
  31. A. Kumar, A. Mukhopadhyay, “Investigation of Ni–Cu–B and Ni–Cu–Sn–B coatings developed by electroless method,” Journal of the Indian Chemical Society, vol. 100, no. 11, p. 101102, 2023.
  32. N. S. Qu, L. Q. Zhang, Z. X. Wang, D. Zhu, “Properties of Ni–CeO₂ composite coatings obtained by electrodeposition,” Surface Engineering, vol. 22, no. 3, pp. 173–176, 2006.