Journals / Scientific Mining Journal / 2026 / Cilt: 50 Sayı: 2

Teknik Not/Technical Note

PÜSKÜRTÜLEN İNCE KAPLAMALARIN ELASTİK MALZEME ÖZELLİKLERİ

Pages
41–45
Publication Date
2011-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that Tekflex has a Young’s Modulus of 13MPa and Poisson’s Ratio of 0.25 while Castonite has a Young’s Modulus of 55 MPa and Poisson’s Ratio of 0.2

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Thin spray-on liners (TSL) have been used extensively as a rock support system.
📊
Key Findings & Data:There are different testing set-ups and test results on TSL’s adhesion, tensile and shear strengths.
💡
Conclusion & Impact:It was found that Tekflex has a Young’s Modulus of 13MPa and Poisson’s Ratio of 0.25 while Castonite has a Young’s Modulus of 55 MPa and Poisson’s Ratio of 0.2
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Püskürtülen İnce Kaplama · PİK · Tahkimat

Abstract

Thin spray-on liners (TSL) have been used extensively as a rock support system. There are different testing set-ups and test results on TSL’s adhesion, tensile and shear strengths. Lately, researchers have been studying TSL’s support mechanism analytically and numerically. In these studies, TSL’s are assumed to be elastic, and different Young’s Modulus and Poisson’s Ratios are assumed. In this study, for the first time in the literature, elastic material properties of TSL products called Tekflex and Castonite which was prepared in the laboratory were determined. It was found that Tekflex has a Young’s Modulus of 13MPa and Poisson’s Ratio of 0.25 while Castonite has a Young’s Modulus of 55 MPa and Poisson’s Ratio of 0.2

Özet

Püskürtülen ince kaplama olarak bilinen PİK, kaya tahkimat sistemi olarak yaygın bir şekilde kullanılmaktadır. Bu kaplamaların yapışma, çekme, makaslama dayanımı gibi özelliklerine dair farklı deney düzenekleri ve deney sonuçları mevcuttur. Son yıllarda araştırmacılar tarafından PİK’lerin tahkimat mekanizmasını anlamaya yönelik analitik ve sayısal çalışmalar yapılmaktadır. Bu çalışmalarda PİK’ler elastisite modülü ve Poisson oranları farklı elastik malzemeler olarak kabul edilmektedir. Bu çalışmada, bu alanda literatürde ilk kez labaratuvar ortamında hazırlanan Tekflex ve Castonite adındaki PİK’lerin elastik malzeme parametreleri belirlenmiştir. Buna göre, Tekflex’in elastik modülü 13 MPa ve Poisson oranı 0,25 iken Castonite’in elastik modülü 55 MPa ve Poisson Oranı 0,2 olarak belirlenmiştir

🔖

Cite This Article

Öztürk, H. (2011). Teknik Not/Technical Note. Scientific Mining Journal, Cilt: 50 Sayı: 2, 41–45. https://ajindex.com/articles/1636837

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...