SavedAdd your journal

Journals / Scientific Mining Journal / 2026 / Cilt: 58 Sayı: 3

PREDICTION OF SPECIFIC ENERGY USING P-WAVE VELOCITY AND SCHMIDT HAMMER HARDNESS VALUES OF ROCKS BASED ON LABORATORY STUDIES

LABORATUVAR ÇALIŞMALARINA BAĞLI OLARAK KAYAÇLARIN P-DALGA HIZI VE SCHMIDT ÇEKİCİ SERTLİĞİ DEĞERLERİ KULLANILARAK ÖZGÜL ENERJİNİN TAHMİNİ

Arif Emre Dursun0000-0003-2001-7814
Hakan Terzioğlu0000-0001-5928-8457
Pages
173–187
Publication Date
2019-09-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Spesifik enerji değeri mekanik kayaç kazısında kayaçların kesilebilirlik özelliklerini belirlemek için

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Spesifik enerji değeri mekanik kayaç kazısında kayaçların kesilebilirlik özelliklerini belirlemek için
📊
Key Findings & Data:Spesifik enerji değeri mekanik kayaç kazısında kayaçların kesilebilirlik özelliklerini belirlemek için
💡
Conclusion & Impact:Spesifik enerji değeri mekanik kayaç kazısında kayaçların kesilebilirlik özelliklerini belirlemek için
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Specific energy · P-wave velocity · Schmidt hammer hardness

Özet

Spesifik enerji değeri mekanik kayaç kazısında kayaçların kesilebilirlik özelliklerini belirlemek için

🔖

Cite This Article

Dursun, A. E., Terzioğlu, H. (2019). PREDICTION OF SPECIFIC ENERGY USING P-WAVE VELOCITY AND SCHMIDT HAMMER HARDNESS VALUES OF ROCKS BASED ON LABORATORY STUDIES. Scientific Mining Journal, Cilt: 58 Sayı: 3, 173–187. https://doi.org/10.30797/madencilik.620630

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (57)

  1. Rock Brittleness Concepts on Rock Cutting. J. S. Afr. Inst. Min. Metall, 103(3), 163-171.
  2. Altındag, R., 2012. Correlation between P-Wave Velocity and Some Mechanical Properties for Sedimentary Rocks. J. S. Afr. Inst. Min. Metall, 112, 229-237.
  3. Apuani, T., King, M.S., Butenuth, C., De Freitas, M.H., 1997. Measurements of the Relationship Between Sonic Wave Velocities and Tensile Strength in Anisotropic Rock. In: Developments in Petrophysics, Geological Society Special Publication No. 122, pp. 107-119.
  4. Aydın, A., Basu, A., 2005. The Schmidt Hammer in Rock Material Characterization. Eng Geol, 81:1-14.
  5. Balci, C., Demircin, M.A., Copur, H., Tuncdemir, H., 2004. Estimation of Specific Energy Based On Rock Properties for Assessment of Roadheader Performance. J. S. Afr. Inst. Min. Metall, 11, 633-643. Balci, C., Bilgin, N., 2007. Correlative Study of Linear Small and Full-Scale Rock Cutting Tests to Select Mechanized Excavation Machines. Int. J. Rock Mech. Min. Sci, 44, 468-76.
  6. Bilgin, N., Seyrek, T., Shahriar, K., 1990. Roadheaders Glean Valuable Tips For Istanbul Metro. Tunnels Tunnelling, 29-32.
  7. Bilgin, N., Balci, C., Eskikaya, S., Ergunalp, D., 1997a. Full Scale and Small Scale Cutting Tests For Equipment Selection In A Celestite Mine. In: Strakos, V. et al. (eds.) 6th International Symposium on Mine Planning and Equipment Selection. Balkema, Rotterdam, pp. 387- 392.
  8. Bilgin, N., Kuzu, C., Eskikaya, S., 1997b. Cutting Performance of Jack Hammers and Roadheaders In Istanbul Metro Drivages. In: Golser, J., Hinkel, W.J., Schubert, W. (eds.) In: Proceedings World Tunnel Congress ‘97. Tunnels for People, Vienna, pp. 455-460.
  9. Bilgin, N., Dincer, T., Copur, H., 2002. The Performance Prediction of Impact Hammers from Schmidt Hammer Rebound Values in Istanbul Metro Tunnel Drivages. Tunnelling and Underground Space Technol, 17 (3), 237-247.
  10. Boadu, F.K., 2000. Predicting the Transport Properties of Fractured Rocks from Seismic Information: Numerical Experiments. Journal of Applied Geophysics, 44:103-13.
  11. Brich, F., 1960. The Velocity of Compressional Waves in Rocks to 10 kbars. Part 1. Journal of Geophysical Research, 65, 1083-1102.
  12. Cobanoğlu, İ., Celik, S.B., 2008. Estimation of Uniaxial Compressive Strength from Point Load Strength, Schmidt Hardness and P-Wave Velocity. Bull Eng Geol Environ, 67, 491-498.
  13. Chrzan, T., 1997. The Determination of Rocks Mechanical Properties with the Use of Ultrasounds. In: Strakos V, Kebo V, Farana L, Smutny L, editors. Proceedings of the 6th International Symposium on Mine Planning and Equipment Selection, Balkema, Rotterdam, pp. 315- 318.
  14. Comakli, R., Kahraman, S., Balci, C., 2014. Performance Prediction of Roadheaders in Metallic Ore Excavation. Tunnelling and Underground Space Technol, 40, 38-45.
  15. Copur, H., Tuncdemir, H., Bilgin, N., Dincer, T., 2001. Specific Energy as a Criterion for Use of Rapid Excavation System in Turkish Mines. Institution Mining and Metallurgy, Transactions A, Mining Technology, 110(A), 149-157.
  16. Copur, H., 2010. Linear Stone Cutting Tests With Chisel Tools For Identification of Cutting Principles and Predicting Performance of Chain Saw Machines. Int. J. Rock Mech. Min. Sci., 47, 1, 104-120.
  17. Copur, H., Balci, C., Tumac, D., Bilgin, N., 2011. Field and Laboratory Studies on Natural Stones Leading to Empirical Performance Prediction of Chain Saw Machines. Int. J. Rock Mech. Min. Sci., 48, 2, 269-282.
  18. Dursun, A.E., 2012. Cuttability of Limestone Strata at North-West of Konya City, PhD. Thesis, The Graduate School of Natural and Applied Science, Selçuk University, Konya, Turkey, p.286 (In Turkish).
  19. Dursun, A.E., Gokay, M.K., 2016. Cuttability Assessment of Selected Rocks Through Different Brittleness Values. Rock Mech Rock Eng, 49, 1173-1190.
  20. Farmer, I.W., Hignett, H.J., Hudson, J.A., 1979. The Role of Geotechnical Factors in the Cutting Performance of Tunnelling Machines in Rocks. In: Proceedings of the fourth international congress on rock mechanics of the ISRM, Montreux, p. 371–7.
  21. Fowell, R.J., McFeat-Smith, I., 1976. Factors Influencing the Cutting Performance of a Selective Tunnelling Machine. in Proc. of Tunnelling’76 Symposium, IMM, London, March, pp.3-10.
  22. Gaviglio, P., 1989. Longitudinal Wave Propagation in a Limestone: The Relationship Between Velocity and Density. Rock Mech Rock Eng, 22:299-306.
  23. Gokceoglu, C., 2002. A Fuzzy Triangular Chart to Predict the Uniaxial Compressive Strength of Ankara Agglomerates from Their Petrographic Composition. Eng Geol, 66, 39-51.
  24. Gokceoglu, C., Zorlu, K., 2004. A Fuzzy Model to Predict the Uniaxial Compressive Strength and the Modulus of Elasticity of a Problematic Rock. Engineering Applications of Artificial Intelligence, 17 (1), 61-72.
  25. Goktan, R.M., Gunes, N., 2005. A Comparative Study of Schmidt Hammer Testing Procedures with Reference to Rock Cutting Machine Performance Prediction. Int. J. Rock Mech. Min. Sci., 42, 466-477.
  26. Howarth, D.F., Adamson, W.R., Berndt, J.R., 1986. Correlation of Model Tunnel Boring and Drilling Machine Performances with Rock Properties. Int J Rock Mech Min Sci Geomech Abstr, 23, 171–5.
  27. Inoue, M., Ohomi, M., 1981. Relation between Uniaxial Compressive Strength and Elastic Wave Velocity of Soft Rock. In: Proceedings of the International Symposium on Weak Rock, Tokyo, pp. 9-13.
  28. Kahraman, R., 1999. Rotary and Percussive Drilling Prediction Using Regression Analysis. Int J Rock Mech Min Sci, 36, 981–9.
  29. Kahraman, R., Balcı, C., Yazıcı, S., Bilgin, N., 2000. Prediction of the Penetration Rate of Rotary Blast Hole Drills Using a New Drillability Index. Int J Rock Mech Min Sci, 37, 729–43.
  30. Kahraman, S., Bilgin, N., Feridunoglu, C., 2003. Dominant Rock Properties Affecting the Penetration Rate of Percussive Drills. Int J Rock Mech Min Sci, 40, 711–23.
  31. Kahraman, S., 2001. A Correlation Between P-Wave Velocity, Number of Joints and Schmidt Hammer Rebound Number. Int J Rock Mech Min Sci, 38, 729- 733.
  32. Kahraman, S., 2002a. Estimating the Direct P-Wave Velocity Value of Intact Rock from Indirect Laboratory Measurements. Int J Rock Mech Min Sci, 39, 101-104.
  33. Kahraman, S., 2002b. The Effects of Fracture Roughness on P-Wave Velocity. Eng Geol, 63:347-350.
  34. Kahraman, S., 2007. The Correlations Between the Saturated and Dry P-Wave Velocity of Rocks. Ultrasonic, 46:341-348.
  35. Kahraman, S., Soylemez, M., Gunaydin, O., and Fener, M., 2005. Determination of the Some Physical Properties of Travertines from Ultrasonic Measurement. Proceedings of 1st International Symposium on Travertine, Denizli, Turkey, pp. 231-234.
  36. Kahraman, S., Yeken, T., 2008. Determination of Physical Properties of Carbonate Rocks from P-Wave Velocity. Bull Eng Geol Environ, 67, 277-281.
  37. Karakuş, M., Tutmez, B., 2006. Fuzzy And Multiple Regression Modelling for Evaluation of Intact Rock Strength Based On Point Load, Schmidt Hammer and Sonic Velocity. Rock Mech Rock Eng, 39 (1), 45-57.
  38. Khandelwal, M., Singh, T.N., 2009. Correlating Static Properties of Coal Measures Rocks with P-Wave Velocity. International Journal of Coal Geology, 79, 55- 60.
  39. Kidybinski, A., 1968. Rebound Number and the Quality of Mine Roof Strata. Int J Rock Mech Min Sci, 5:283- 291.
  40. King, M.S., Chaudhry, N.A., Shakeel, A., 1995. Experimental Ultrasonic Velocities and Permeability for Sandstones with Aligned Cracks. Int J Rock Mech Min Sci, 32(2):155-163.
  41. Kopf, M., Muller, H.J., Gottesmann. B. 1985. Correlation between Pyroxene Content and Vp And Vs Under High Pressure. Kapicka, A., Kropacek, V., Pros, Z. (eds.). Physical properties of the mineral system of the Earth’s Interior. Union Czech. Math. Phys., Prague, pp. 168- 172.
  42. McFeat-Smith, I., Fowell, R.J., 1977. Correlation of Rock Properties and The Cutting Performance of Tunneling Machines. In Proc. of a Conference on Rock Engineering, CORE-UK, The University of Newcastle upon Tyne, 581-602.
  43. McFeat-Smith, I., Fowell, R.J., 1979. The Selection and Application of Roadheaders for Rock Tunneling. Proc. 4th Rapid Excavation and Tunnelling Conference, Atlanta, AIME, New York, 261-279.
  44. Poole, R.W., Farmer, I.W., 1978. Geotechnical Factors Affecting Tunnelling Machine Performance in Coal Measures Rock. Tunnels and Tunnelling, 27-30.
  45. Rostami, J., Ozdemir, L., Neil, D., 1994. Performance Prediction, A Key Issue in Mechanical Hard Rock Mining. Mining Engineering, November, 1264-1267.
  46. Schmidt, E., 1951. A Non-Destructive Concrete Tester. Concrete, 59:34-35.
  47. Shahriar, K., 1988. Rock Cuttability and Geotechnical Factors Affecting the Penetration Rates of Roadheaders. PhD thesis, Istanbul Technical University, p. 241.
  48. Tarkoy, P.J., Hendron, A.J., 1975. Rock Hardness Index. US National Science Foundation report NSFRAT- 75-030.
  49. Thill, R.E., Bur, T.R., 1969. An Automated Ultrasonic Pulse Measurement System. Geophysics. 34, 101-105. Tuncdemir, H., 2008. Impact Hammer Applications in Istanbul Metro Tunnels. Tunnelling and Underground Space Technol, 23, 264-72.
  50. Vasconcelos, G., Lourenco, P.B., Alves, C.A.S., Pamplona, J. 2008. Ultrasonic Evaluation of the Physical and Mechanical Properties Of Granites. Ultrasonics, 48, 453-466.
  51. Yagiz, S., 2011. P-Wave Velocity Test for Assessment of Geotechnical Properties of Some Rock Materials. Bull Mater Sci., 34, 947–953.
  52. Young, R.P., Hill, T.T., Bryan I.R., Middleton, R., 1985. Seismic Spectroscopy in Fracture Characterization. Quart. J. Eng. Geol. 18, 459-479.
  53. Tiryaki, B., Dikmen, A., 2006. Effects of Rock Properties on Specific Cutting Energy in Linear Cutting of Sandstones By Picks. Rock Mech Rock Eng, 39(2), 89- 120.
  54. Tumac, D., Bilgin, N., Feridunoglu, C., Ergin, C., 2007. Estimation of Rock Cuttability from Shore Hardness and Compressive Strength Properties. Rock Mech Rock Eng, 40(5), pp. 477-490.
  55. Tumac, D., 2014. Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness. Rock Mech Rock Eng, 47, 703-715.
  56. Ulusay, R., Hudson, J., 2007. The Complete ISRM Suggested Methods For Rock Characterization, Testing and Monitoring: 1974–2006.” Ankara: ISRM Turkish National Group.
  57. Kopf, M., Muller, H.J., Gottesmann. B. 1985. Correlation between Pyroxene Content and Vp And Vs Under High Pressure. Kapicka, A., Kropacek, V., Pros, Z. (eds.). Physical properties of the mineral system of the Earth’s Interior. Union Czech. Math. Phys., Prague, pp. 168- 172.