Journals / Scientific Mining Journal / 2024 / Cilt: 63 Sayı: 1

Research and Application of Sealed coring Technology in In-situ Coal Seam of Directional Long borehole in Coal mine

Dayong Tang(Chongqing University of Arts and Sciences)0009-0009-8236-4070
Wenbing Wu(Chongqing Research Institute Co., Ltd, China Coal Technology Engineering Group)0009-0002-7974-934X
Yi Tang(Southwest Jiaotong University)0009-0003-3638-5352
Zhengyong Duan(Chongqing University of Arts and Sciences)0009-0005-3999-9282
Xiaolong He(Chongqing University of Arts and Sciences)0009-0000-7686-7784
Shubo Zhou(Chongqing University of Arts and Sciences)0009-0009-0794-7612
Linlong Ni(Chongqing University of Arts and Sciences)0009-0005-0092-3897
Pages
41–46
Publication Date
2024-09-10
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, during the industrial test underground, it was found that the gas content in the coal seam measured by closed sampling was 1.9-2.5 times higher than that of the coal seam sampled by the hole, which verified the successful design of the closed sampling device.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In order to accurately obtain the gas content of in-situ coal seams in coal mines, a sealed coring technology for in-situ coal seams in coal mines has been proposed.
📊
Key Findings & Data:By utilizing the pressure difference generated by high-pressure water at both ends of the piston, the piston is driven to cut off the positioning pin, which in turn drives the ball valve in the coring device to rotate, achieving the goal of cutting off and sealing the in-situ coal core.
💡
Conclusion & Impact:Finally, during the industrial test underground, it was found that the gas content in the coal seam measured by closed sampling was 1.9-2.5 times higher than that of the coal seam sampled by the hole, which verified the successful design of the closed sampling device.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Directional long-borehole · In-situ coal seam · Sealed coring

Abstract

In order to accurately obtain the gas content of in-situ coal seams in coal mines, a sealed coring technology for in-situ coal seams in coal mines has been proposed. By utilizing the pressure difference generated by high-pressure water at both ends of the piston, the piston is driven to cut off the positioning pin, which in turn drives the ball valve in the coring device to rotate, achieving the goal of cutting off and sealing the in-situ coal core. Performance tests were conducted on the sealing pressure of the coring device by opening the amount of water holes on the piston and using suspension pins of different materials, verifying the working parameters of the piston opening amount and suspension pins of different materials, providing basic data for subsequent industrial underground tests. Finally, during the industrial test underground, it was found that the gas content in the coal seam measured by closed sampling was 1.9-2.5 times higher than that of the coal seam sampled by the hole, which verified the successful design of the closed sampling device.

🔖

Cite This Article

Tang, D., Wu, W., Tang, Y., Duan, Z., He, X., Zhou, S., Ni, L. (2024). Research and Application of Sealed coring Technology in In-situ Coal Seam of Directional Long borehole in Coal mine. Scientific Mining Journal, Cilt: 63 Sayı: 1, 41–46. https://doi.org/10.30797/madencilik.1426095

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (21)

  1. Akdaş, S. B., Fişne, A. 2023. A data-driven approach for the prediction of coal seam gas content using machine learning techniques. Applied Energy, 347, 121499. Doi: 10.1016/j.apenergy.2023.121499
  2. Chen, S., Tang, D., Tao, S., Xu, H., Li, S., Zhao, J., Fu, H. 2017. In-situ stress measurements and stress distribution characteristics of coal reservoirs in major coalfields in China: Implication for coalbed methane (CBM) development. International Journal of Coal Geology, 182, 66-84. DOI: 10.1016/j.coal.2017.09.009
  3. Ding, Z.R. Engineering Fluid Mechanics [M].Beijing: Higher Education Press, 2022.
  4. Guo, D., Chen, L., Zhou, Z., Wang, D., Zhang, Y., Yang, X., Xie, H. 2023b. Development of a pressure coring system for the investigation of deep underground exploration. International Journal of Mining Science and Technology, 33(11), 1351 -1364.DOI:10.1016/j.ijmst.2023.10.001
  5. Guo, D., Xie, H. P., Chen, L., Zhou, Z. Y., Lu, H. P., Dai, L., Gao, M. Z. 2023a. In-situ pressure-preserved coring for deep exploration: Insight into the rotation behavior of the valve cover of a pressure controller. Petroleum Science, 20(4), 2386-2398.DOI: 10.1016/ j.petsci.2023.02.020
  6. Guo, D., Xie, H., Gao, M., Li, J., He, Z., Chen, L., Dai, L. 2024. In-situ pressure-preserved coring for deep oil and gas exploration: Design scheme for a coring tool and research on the in-situ pressure-preserving mechanism. Energy, 286, 129519. DOI: 10.1016/j.energy.2023.129519
  7. Hua, C., Wang, Z., Su, E., Dong, J., Yue, J., Cui, Y., & Zhang, K. 2022. In situ volume recovery method for non-seal gas pressure measurement technology: a comparative study. ACS Omega, 7(45), 41341-41352. DOI:10.1021/acsomega.2c05120
  8. Huang, W., Li, J., Liu, Z., Yang, M., You, Z., & Xie, H. 2023.Study of a low-disturbance pressure-preserving corer and its coring performance in deep coal mining conditions. International Journal of Mining Science and Technology, 33(11), 1397-1410. DOI: 10.1016/j.ijmst.2023.07.003
  9. Karacan, C. Ö., Martín-Fernández, J. A., Ruppert, L. F., & Olea, R. A. 2021. Insights on the characteristics and sources of gas from an underground coal mine using compositional data analysis. International Journal of Coal Geology, 241, 103767.DOI:10.1016/j.coal.2021.103767
  10. Long, W.C., Sun, S.Q., Chen, J. 2022.Study on long-distance fixed-point sealed coring technology in broken-soft coal seam. Coal Geology & Exploration, 50(8), 93-98. DOI:10.12363/issn.1001-1986.21.12.0882
  11. Sang, S., Li, R., Liu, S., Zhou, X., Wei, B., Han, S., Zhou, Z. 2024. Research progress and breakthrough directions of the key technical fields for large scale and efficient exploration and development of coalbed methane in Xinjiang.
  12. Journal of China Coal Society, 49(1), 563-585. Doi: 10.13225/j.cnki.jccs.YH23.1313
  13. Szlązak, N., Korzec, M., & Piergies, K. 2021. The determination of the methane content of coal seams based on drill cutting and core samples from coal mine roadway. Energies, 15(1), 178.DOI:10.3390/en15010178
  14. Szlązak, N., Obracaj, D., &Korzec, M. 2021. Estimation of gas loss in methodology for determining methane content of coal seams. Energies, 14(4), 982.Doi: 10.3390/en14040982
  15. Tao, S., Pan, Z., Tang, S., & Chen, S. 2019. Current status and geological conditions for the applicability of CBM drilling technologies in China: A review. International Journal of Coal Geology, 202, 95-108. Doi: 10.1016/j.coal.2018.11.020
  16. Van Dyke, M., Klemetti, T., & Wickline, J. 2020. Geologic data collection and assessment techniques in coal mining for ground control. International Journal of Mining Science and Technology, 30(1), 131-139.Doi: 10.1016/j.ijmst.2019.12.003
  17. Wang, J., Yu, M., Qian, D., Wan, B., Sun, Y., Chen, C., Tang, Y. 2022a. Optimisation of drainage performance of the thin-walled core barrel sealing technology for pressure preservation sampling. Ocean Engineering, 250, 110996.DOI: 10.1016/j.oceaneng.2022.110996
  18. Wang, Q., Wang, Z., Yue, J., An, F., Dong, J., & Ke, W. 2022b. Temperature of the Core Tube Wall during Coring in Coal Seam: Experiment and Modeling. ACS Omega, 7(9), 7901-7911. DOI:10.1021/acsomega.1c06746
  19. Wu, N. H., Gao, M. Z., Zhu, L. Y., Li, J. N., Fan, D., You, B., Zhu, G. D. 2023. Pressure control method and device innovative design for deep oil in-situ exploration and coring. Petroleum Science, 20(2), 1169-1182. DOI:10.1016/j.petsci.2022. 10.011
  20. Xie, H. P., Liu, T., Gao, M. Z., Chen, L., Zhou, H. W., Ju, Y., Zhao, Z. Y. 2021. Research on in-situ condition preserved coring and testing systems. Petroleum Science, 18(6), 1840-1859. DOI:10.1016/j.petsci.2021.11.003
  21. Yang, D., Zhao, Z., Wu, Y., Zhu, L., Lu, J., Liu, T., & Xie, H. 2023. A graphene-enhanced high-barrier and fast-curing film for deep in situ condition preserved coring in coal seams. International Journal of Mining Science and Technology, 33(11), 1365-1376. DOI:10.1016/j.ijmst.2023.08.005 Yu, B., Xie, H., Chen, L., Zhao, W., & He, Z. 2020.Exploration of digital twin design mechanism of the deep in situ rock insulation coring device. Geofluids, 2020, 8835085. DOI: 10.1155/2020/8835085 Zhao, F.J., Deng, Q.G., Hao, F.C., Zuo, W.Q. 2023. A new method of coring in coal mine: pressure-holding and continuous coring technology. Bulletin of Engineering Geology and the Environment, 82(1), 17. DOI: 10.1007/s10064-022-03038-7