SavedAdd your journal

Journals / Turkish Journal of Civil Engineering / 2026 / Cilt: 32 Sayı: 4

Flow Rate along the Length of the Swirling Vortex Axis at an Intake

Kerem Taştan(Gazi Üniversitesi)0000-0003-1747-2496
Nevzat Yıldırım(Çankaya Üniversitesi)0000-0002-0985-8084
Pages
11013–11027
Publication Date
2021-07-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The agreement between available test data relating to the radial velocity and the method introduced in this study is found to be satisfactory.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the characteristics of the flow in the region of swirling vortex are examined.
📊
Key Findings & Data:The potential flow model based on the summing infinite number of spherical sinks along the vortex core is introduced to predict the flow field and the flow rate along the vortex axis.
💡
Conclusion & Impact:The agreement between available test data relating to the radial velocity and the method introduced in this study is found to be satisfactory.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Intake · submergence · swirling flow

Abstract

In this study, the characteristics of the flow in the region of swirling vortex are examined. The potential flow model based on the summing infinite number of spherical sinks along the vortex core is introduced to predict the flow field and the flow rate along the vortex axis. The flow towards the swirling vortex core has considerable effects on the radial velocity distribution within the ambient fluid flow region near the intake. The agreement between available test data relating to the radial velocity and the method introduced in this study is found to be satisfactory.

Özet

In this study, the characteristics of the flow in the region of swirling vortex are examined. The potential flow model based on the summing infinite number of spherical sinks along the vortex core is introduced to predict the flow field and the flow rate along the vortex axis. The flow towards the swirling vortex core has considerable effects on the radial velocity distribution within the ambient fluid flow region near the intake. The agreement between available test data relating to the radial velocity and the method introduced in this study is found to be satisfactory.

🔖

Cite This Article

Taştan, K., Yıldırım, N. (2021). Flow Rate along the Length of the Swirling Vortex Axis at an Intake. Turkish Journal of Civil Engineering, Cilt: 32 Sayı: 4, 11013–11027. https://doi.org/10.18400/tekderg.593595

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Denny, D.F., An experimental study of air-entraining vortices in pump sumps. Proceedings of Institution of Mechanical Engineering, 170(2), 106116, 1956.
  2. Anwar, H.O., Weller, J.A., Amphlett, M.B., Similarity of free vortex at horizontal intake. J. Hydraul. Res. 16(2), 95106, 1978.
  3. Hecker, G.E., Fundamentals of vortex intake flow. In: Knauss, J (ed) Swirling Flow Problems at Intakes, pp. 13-38. A.A. Balkema, Rotterdam, 1987.
  4. Taştan, K., Yıldırım, N., Effects of Froude, Reynolds and Weber numbers on an air-entraining vortex. J. Hydraul. Res. 52(3), 421-425, 2014.
  5. Kocabaş, F., Yıldırım, N., Effect of circulation on critical submergence of an intake pipe. J. Hydraul. Res. 40(6), 741-752, 2002.
  6. Yang, J., Liu, T., Bottacin-Busolin, A, Lin C., Effects of intake-entrance profiles on free-surface vortices. J. Hydraul. Res. 52(4), 523-531, 2014.
  7. Naderi, V., Farsadizadeh, D., Dalir, A.H., Arvanaghi, H., Effect of using vertical plates on vertical intake on discharge coefficient. Arab. J. Sci. Eng. 39(12), 8627-8633, 2014.
  8. Sun, H., Liu, Y., Theoretical and experimental study on the vortex at hydraulic intakes. J. Hydraul. Res. 53(6), 787-796, 2015.
  9. Odgaard, A.J., Free-surface air-core vortex. J. Hydraul. Eng. 112(7), 610-620, 1986.
  10. Suerich-Gulick, F., Gaskin, S.J., Villeneuve, M., Parkinson, E., Characteristics of free surface vortices at low-head hydropower intakes. J. Hydraul. Eng. 140(3), 291-299, 2014.
  11. Vatistas, G.H., Lin, S., Li, P.M., A similar profile for the tangential velocity in vortex chambers. Exp. Fluids, 6 135-137, 1988.
  12. Anwar, H.O., Flow in a free vortex. Water Power, 4, 153-161, 1965.
  13. Vatistas, G.H., Kozel, V., Mih, W.C., A simpler model for concentrated vortices. Exp. Fluids, 11(1), 73-76, 1991.
  14. Taştan, K., Yıldırım, N., Effects of intake geometry on the occurrence of a free-surface vortex. J. Hydraul. Eng. 144(4), 04018009-1-04018009-11, 2018.
  15. Suerich-Gulick, F., Gaskin, S J., Villeneuve, M., Parkinson, E., Free surface intake vortices: Theoretical model and measurements J. Hydraul. Res. 52(4), 502-512, 2014.
  16. Quick, M.C., Efficiency of air-entraining vortex formation of water intake. Journal of the Hydraulics Division, 96(7), 1403-1415, 1970.