Journals / Journal of Artificial Intelligence and Data Science / 2026 / Cilt: 1 Sayı: 1

Modeling and Design Optimization to Determine the Mechanical Properties of a Recent Composite

Naciye Burcu Kartal(IZMIR KATIP CELEBI UNIVERSITY)
Pages
80–88
Publication Date
2021-08-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is found what the optimum input parameters are needed to achieve maximum tensile strength and elongation at break values of the material and that the type of scenario and the choice of constraints for design variables are critical in the optimization problem.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study proposes an appropriate optimization model for determining a new composite material's mechanical properties by neuro-regression analysis.
📊
Key Findings & Data:The R^2_training, R^2_testing, R^2_validation, and minimum, maximum values were determined for each model.
💡
Conclusion & Impact:It is found what the optimum input parameters are needed to achieve maximum tensile strength and elongation at break values of the material and that the type of scenario and the choice of constraints for design variables are critical in the optimization problem.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Composite material · mechanical properties · neuro-regression analysis

Abstract

This study proposes an appropriate optimization model for determining a new composite material's mechanical properties by neuro-regression analysis. This new composite material is obtained by combining hemp and polypropylene fibers. It was developed for the sector of upholstered furniture. First, different multiple regression models have been tried for input and output values. The R^2_training, R^2_testing, R^2_validation, and minimum, maximum values were determined for each model. Then, the stochastic optimization approach is used to predict and optimize the mechanical properties of the new biocomposite system. Finally, multiple non-linear models determine the maximum tensile strength and elongation achievable within the constraints. It is found what the optimum input parameters are needed to achieve maximum tensile strength and elongation at break values of the material and that the type of scenario and the choice of constraints for design variables are critical in the optimization problem.

🔖

Cite This Article

Kartal, N. B. (2021). Modeling and Design Optimization to Determine the Mechanical Properties of a Recent Composite. Journal of Artificial Intelligence and Data Science, Cilt: 1 Sayı: 1, 80–88. https://ajindex.com/articles/1618354

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. A. K. Kaw, Mechanics of composite materials. CRC press, 2005.
  2. E. Ciupan, M. Ciupan and D.C. Jucan, “Determining the mechanical properties of a new composite material using artificial neural networks”. International Journal of Engineering Trends and Technology ( IJETT), vol.66, no.2, Dec., pp.103, 2018.
  3. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM std. ASTM D3039/D3039M, 2017.
  4. I. Polatoğlu, L. Aydın, B.C. Nevruz and S. Ozer, “A Novel Approach for the Optimal Design of a Biosensor”. Analytical Letters, pp.1-18, 2020.
  5. MM Dawoud and H.M. Saleh, Introductory Chapter: Background on Composite Materials. In Characterizations of Some Composite Materials. IntechOpen, 2018.
  6. M. Gandomi, M. Soltanpour, M. Zolfaghari and A. Gandomi, “Prediction of peak ground acceleration of Iran’s tectonic regions using a hybrid soft computing techniques”. Journal of Geoscience Frontiers, vol. 7, no. 1, pp.75-82, 2016.
  7. DK. Rajak, D.D. Pagar, P.L. Menezes and E. Linul, (2019). "Fiber-reinforced polymer composites: Manufacturing, properties, and applications". Reinforced Polymer Composites, vol. 11, no. 10, pp. 1667, 2019
  8. A. Garg, V. Vijayaraghavan, J.S.L. Lam, P.M. Singru and L.A. Gao, “A molecular simulation based computational intelligence study of a nano-machining process with implications on its environmental performance”. Swarm and Evolutionary Computation, vol. 21, pp.54-63, 2015.
  9. A. Garg, V. Vijayaraghavan, J. Zhang, S. Li and X. Liang, “Design of robust battery capacity model for electric vehicle by incorporation of uncertainties”. International Journal of Energy Research, vol. 41, no. 10, pp. 1436–1451, 2017.
  10. Saman Maroufpoor, Omid Bozorg-Haddad, in Handbook of Probabilistic Models, 2020
  11. I. Polatoglu, and L. Aydin, “A new design strategy with stochastic optimization on the preparation of magnetite cross-linked tyrosinase aggregates (MCLTA),” Process Biochemistry, vol. 99, pp. 131–138, 2020.
  12. A. B. Ceylan, L. Aydin, and M. Nil, H. Mamur, İ. Polatoğlu and H. Sözen. “A new hybrid approach in selection of optimum establishment location of the biogas energy production plant,” Biomass Conv. Bioref, 2021. https://doi.org/10.1007/s13399-021- 01532-8