SavedAdd your journal

Journals / Research Journal of Biomedical and Biotechnology / 2026 / Sayı: 2026-1

An Investigation of Atmospheric Pressure Plasma Coating Effect on Implant Surface

Yaşar Kemal Erdoğan(ISPARTA UNIVERSITY OF APPLIED SCIENCES, FACULTY OF TECHNOLOGY)0000-0002-5662-5398
Sevde Nur Kutlu(SULEYMAN DEMIREL UNIVERSITY, ULUBORLU SELAHATTİN KARASOY VOCATIONAL SCHOOL, DEPARTMENT OF ELECTRONICS AND AUTOMATION, BIOMEDICAL DEVICE TECHNOLOGY PR.)0000-0003-3243-9037
Pages
—
Publication Date
2026-01-20
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results, it was observed that the hydrophilicity obtained by atmospheric plasma modification limits bacterial adhesion and has high potential for biomedical applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The bioinert properties of bare 316L stainless steels (SS) can result in weak interactions with cells and tissues, as well as bacterial issues.
📊
Key Findings & Data:For this purpose, implant surfaces were modified using helium plasma for 30 s, 60 s, and 120 s.
💡
Conclusion & Impact:According to the results, it was observed that the hydrophilicity obtained by atmospheric plasma modification limits bacterial adhesion and has high potential for biomedical applications.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Atmospheric pressure plasma · Surface modification · 316L stainless steel

Abstract

The bioinert properties of bare 316L stainless steels (SS) can result in weak interactions with cells and tissues, as well as bacterial issues. Atmospheric pressure plasmas can modify the surface of implant materials, affecting properties such as protein and cell adhesion, biocompatibility, and bacterial attachment. In this study, the effect of atmospheric plasma application on the morphology and chemistry of implant surfaces was investigated. For this purpose, implant surfaces were modified using helium plasma for 30 s, 60 s, and 120 s. The morphology of the surfaces after the application was characterized using SEM. It was observed that the water contact angle of the surfaces changed after plasma treatment, with the water contact angle of the surface measuring 10° after 120 s of plasma application. The interactions of the modified surfaces with bacteria were tested on Escherichia coli (E. coli) and Staphylococcus aureus (S.aureus). According to the results, it was observed that the hydrophilicity obtained by atmospheric plasma modification limits bacterial adhesion and has high potential for biomedical applications.

Özet

Çıplak 316L paslanmaz çeliklerin (SS) sahip olduğu bioinert özellik, hücre ve dokularla zayıf etkileşim gösterebilmekte ayrıca bakteriyel sorunlar teşkil edebilmektedir. Atmosferik basınç plazmalar, implant materyalinde yüzey modifikasyonu sağlayarak protein ve hücre yapışmasını, biyouyumluluğu ve bakteri tutunma gibi özellikleri etkileyebilmektedir. Bu çalışmada, atmosferik plazma uygulamasının implant yüzeylerin morfoloji ve kimyası üzerine etkisi incelenmiştir. Bu amaçla, implant yüzeylere 30 s, 60 s ve 120 s boyunca helyum plazma ile modifiye edilmiştir. Uygulama sonrası yüzeylerin morfolojisi SEM ile karakterize edilmiştir. Plazma uygulama sonrası yüzeylerin su temas açısının değiştiği, özellikle 120 s plazma uygulama sonrası yüzey su temas açısının 10o olarak tespit edilmiştir. Modifiye yüzeylerin bakteri ile olan etkileşimleri Escherichia Coli (E.coli) ve Staphylococcus aureus (S.aureus) üzerinde test edilmiştir. Sonuçlara göre, atmosferik plazma modifikasyonu sonucu elde edilen hidrofilite özelliğin bakteri tutunmasını sınırladığı ve biyomedikal uygulamalar için yüksek potansiyel taşıdığı gözlemlenmiştir.

🔖

Cite This Article

Erdoğan, Y. K., Kutlu, S. N. (2026). An Investigation of Atmospheric Pressure Plasma Coating Effect on Implant Surface. Research Journal of Biomedical and Biotechnology, Sayı: 2026-1. https://ajindex.com/articles/1599642

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Y. Yue, X. Pei and X. Lu, "Comparison on the absolute concentrations of hydroxyl and atomic oxygen generated by five different nonequilibrium atmospheric-pressure plasma jets.," IEEE Transactions on Radiation and Plasma Medical Sciences, vol. 1, no. 6, pp. 541-5, 2017.
  2. S. N. Kutlu, MCF-7 Meme Kanseri Hücrelerine Muamele Edilecek Soğuk Plazma Sisteminin Tasarlanması, Isparta: Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü YL Tezi, 2018, p. 62 s.
  3. A. Dezhpour, H. Ghafouri, S. Jafari and M. Nilkar, "Effects of cold atmospheric-pressure plasma in combination with doxorubicin drug against breast cancer cells in vitro and in vivo," Free Radical Biology and Medicine, no. 209, pp. 202-210, 2023.
  4. S. Darmawati, A. Rohmani, L. Nurani, M. Prastiyanto and et al, "When plasma jet is effective for chronic wound bacteria inactivation, is it also effective for wound healing?," Clinical Plasma Medicine, vol. 14, p. 100085, 2019.
  5. B. Çelik,. İ. D. Çapar, F. İbiş, N. Erdilek and U. Ercan, "Deionized water can substitute common bleaching agents for nonvital tooth bleaching when treated with non-thermal atmospheric plasma," Journal of oral science, vol. 61, no. 1, pp. 103-110, 2019.
  6. Y. Jiao, F. R. Tay,. L. N. Niu and J. H. Chen, "Advancing antimicrobial strategies for managing oral biofilm infections," International journal of oral science, vol. 11, no. 3, p. 28, 2019.
  7. M. Balkenhol, F. P. Nothdurft, M. Hannig, A. Schindler, A. Lehmann, T. Arnold and et al, "Bonding to zirconia ceramic: The effect of cold plasma treatment and 4-META," Clinical Plasma Medicine, no. 5, pp. 8-13, 2017. A. Alqutaibi, A. Aljohani, A. Alduri, A. Masoudi, A. M. Alsaedi, H. M. Al-Sharani and M. S. Zafar, "The Effectiveness of Cold Atmospheric Plasma (CAP) on Bacterial Reduction in Dental Implants: A Systematic Review," Biomolecules, vol. 13, no. 10, p. 1528, 2023.
  8. C. Gardin,. L. Ferroni, Y. Erdoğan, F. Zanotti and et al, "Nanostructured Modifications of Titanium Surfaces Improve Vascular Regenerative Properties of Exosomes Derived from Mesenchymal Stem Cells: Preliminary in vitro Results," Nanomaterials, vol. 11, no. 12, p. 3452, 2021. H. Lee, H. Jeon, A. Jung, J. Kim, J. Kim and et al, "Improvement of Osseointegration Efficacy of Titanium Implant through Plasma Surface Treatment," Biomedical Engineering Letters, vol. 12, no. 4, pp. 421-432, 2022.
  9. H. Jeon, A. Jung, H. Kim, J. Seo, J. Kim, M. Yum and et al, "Enhanced osteoblast adhesion and proliferation on vacuum plasma-treated implant surface," Applied Sciences, vol. 12, no. 19, p. 9884, 2022.
  10. R. Daum, I. Mrsic, J. Hutterer, A. Junginger, S. Hİnderer, A. Meixner and et al, "Fibronectin Adsorption on Oxygen Plasma-Treated Polyurethane Surfaces Modulates Endothelial Cell Response," Journal of Materials Chemistry B, vol. 9, no. 6, p. 1647–60, 2021.
  11. A. Chen, H. Ghaffar, H. Taib and A. Hassan, "A Review of Bacterial Colonization on Dental Implants With Various Hygiene Instruments," Cureus, vol. 15, no. 10, 2023.
  12. C. R. Gonzalez-Gonzalez, HindleB. J, S. Saad and A. C. Stratakos, "Inactivation of Listeria monocytogenes and Salmonella on stainless steel by a piezoelectric cold atmospheric plasma generator," Applied Sciences, vol. 11, no. 8, p. 3567, 2021.
  13. Y. K. Erdoğan and B. Ercan, "Anodized nanostructured 316L stainless steel enhances osteoblast functions and exhibits anti-fouling properties," ACS Biomaterials Science & Engineering, vol. 9, no. 2, pp. 693-704, 2023.
  14. G. Jungbauer, L. Favaro, S. Müller, A. Sculean and S. Eick, "The in-vitro activity of a cold atmospheric plasma device utilizing ambient air against bacteria and biofilms associated with periodontal or peri-implant Diseases," Antibiotics, vol. 11, no. 6, p. 752, 2022.
  15. A. H. Marx, H. Oltmanns, J. Meißner, J. Verspohl, T. Fuchsluger and C. Busse, "Argon cold atmospheric plasma eradicates pathogens in vitro that are commonly associated with canine bacterial keratitis," Frontiers in veterinary science, no. 10, p. 1320145, 2024.
  16. R. Piola, A. S. Ang, M. Leigh and S. A. Wade, "A comparison of the antifouling performance of air plasma spray (APS) ceramic and high velocity oxygen fuel (HVOF) coatings for use in marine hydraulic applications," Biofouling, vol. 34, no. 5, pp. 479-491, 2018.
  17. Y. K. Ergoğan and et al, "Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior," ACS Biomaterials Science and Engineering, vol. 10, no. 1, p. 377–90, 2024.
  18. P. Fernández-Gómez, I. Muro-Fraguas, R. Múgica-Vidal, A. Sainz-García, E. Sainz-García, M. González-Raurich and F. Alba-Elías, "Development and characterization of anti-biofilm coatings applied by Non-Equilibrium Atmospheric Plasma on stainless steel," Food research international, no. 152, p. 109891, 2022. C. R. Gonzalez-Gonzalez, B. J. Hindle, S. Saad and A. C. Stratakos, "Inactivation of Listeria monocytogenes and Salmonella on stainless steel by a piezoelectric cold atmospheric plasma generator," Applied Sciences, vol. 11, no. 8, p. 3567, 2021.
  19. M. Asuquo, R. B. Nair, M. Fotoohinezhadkhales, A. Akbarnozari, P. Stoyanov and C. Moreau, "Tribological Behavior of Atmospheric Plasma-Sprayed Cu-Ni Coatings," Journal of Thermal Spray Technology, pp. 1-16, 2024.
  20. D. Landek, M. Kurtela, I. Stojanović, J. Jačan and S. Jakovljević, "Corrosion and Micro-Abrasion Properties of an AISI 316L Austenitic Stainless Steel after Low-Temperature Plasma Nitriding," Coatings, vol. 13, no. 11, p. 1854, 2023.
  21. E. Pajootan, M. Ye, M. Zhang, S. Niroumandrad, S. Omanovic and S. Coulombe, "Plasma-functionalized multi-walled carbon nanotubes directly grown on stainless steel meshes as supercapacitor electrodes 55(19)," Journal of Physics D: Applied Physics, vol. 55, no. 19, p. 194001, 2022.
  22. B. Çelik,. İ. D. Çapar, F. İbiş, N. Erdilek and U. Ercan, "Deionized water can substitute common bleaching agents for nonvital tooth bleaching when treated with non-thermal atmospheric plasma," Journal of oral science, vol. 61, no. 1, pp. 103-110, 2019.
  23. Y. Jiao, F. R. Tay,. L. N. Niu and J. H. Chen, "Advancing antimicrobial strategies for managing oral biofilm infections," International journal of oral science, vol. 11, no. 3, p. 28, 2019.
  24. C. Gardin,. L. Ferroni, Y. Erdoğan, F. Zanotti and et al, "Nanostructured Modifications of Titanium Surfaces Improve Vascular Regenerative Properties of Exosomes Derived from Mesenchymal Stem Cells: Preliminary in vitro Results," Nanomaterials, vol. 11, no. 12, p. 3452, 2021. H. Lee, H. Jeon, A. Jung, J. Kim, J. Kim and et al, "Improvement of Osseointegration Efficacy of Titanium Implant through Plasma Surface Treatment," Biomedical Engineering Letters, vol. 12, no. 4, pp. 421-432, 2022.