SavedAdd your journal

Journals / Turkish Journal of Science / 2021 / Cilt: 6 Sayı: 3

Mathematical Modeling of the Shape of Cavity Created with Laser Using Melting, Boiling Temperature.

Timur Canel(KOCAELI UNIVERSITY)0000-0002-4282-1806
İrem Bağlan(KOCAELI UNIVERSITY)0000-0002-1877-9791
Pages
162–166
Publication Date
2021-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results obtained with the proposed mathematical model are quite compatible with the experimental results.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a groove was formed on the Ti-6Al-4V plate with Nd:YAG laser.
📊
Key Findings & Data:The structure of the resulting grooves was examined.
💡
Conclusion & Impact:The results obtained with the proposed mathematical model are quite compatible with the experimental results.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Mathematical Modeling · Fourier method · Laser

Abstract

In this study, a groove was formed on the Ti-6Al-4V plate with Nd:YAG laser. The structure of the resulting grooves was examined. Mathematical modeling of the heat dissipation was made by making use of the melting and boiling temperatures observed on the plate. Later, to prove the validity of the obtained mathematical model, grooves with different geometries were obtained with different laser energies. The results obtained with the proposed mathematical model are quite compatible with the experimental results.

🔖

Cite This Article

Canel, T., Bağlan, İ. (2021). Mathematical Modeling of the Shape of Cavity Created with Laser Using Melting, Boiling Temperature.. Turkish Journal of Science, Cilt: 6 Sayı: 3, 162–166. https://ajindex.com/articles/1557529

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Referans1 L. Urtekin, Ö. Keleş, Biyomedikal Uygulamalar İçin TiN Kaplı Ti6Al4V Alaşımının Mekanik Özelliklerinin Araştırılması, Savunma Bilimleri Dergisi, 18/2 (2019) 91.
  2. Referans2 C.N. Hart, G. Dip and P.R. Wilson, Evaluation of welded titanium joints used with cantilevered implant-supported prostheses, The Journal Of Prosthetic Dentistry, 96 (2006) 25
  3. Referans3 M. Qian, W. Xu, M. Brandt, and H.P. Tang, Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties, MRS Bulletin, 41 (2016) 775.
  4. Referans4 M. Król*, T. Tański, Surface Quality Research For Selective Laser Melting Of Ti-6Al-4V Alloy, Arch. Metall. Mater., 61 (2016), 1291.
  5. Referans5 I. Gurrappa, Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications, Materials Characterization 51 (2003) 131.
  6. Referans6 M. Balasubramanian, V. Jayabalan, and V. Balasubramanian, Response Surface Approach to Optimize the Pulsed Current Gas Tungsten Arc Welding Parameters of Ti-6Al-4V Titanium Alloy, METALS AND MATERIALS International, Vol. 13, No. 4 (2007), pp. 335-344
  7. Referans7 Z. Guo, S. Malinov, W. Sha, Modelling beta transus temperature of titanium alloys using artificial neural network, Computational Materials Science 32 (2005) 1–12
  8. Referans8 S. Lazare, J. Lopez, F. Weisbuch, High-aspect-ratio microdrilling in olymericmaterials with intense KrF laser radiation, Appl. Phys. 1999, A 69 [Suppl.], S1–S6
  9. Referans9 S. Lazare And V. Tokarev, Recent Experimental and Theoretical Advances in Microdrilling of Polymers with Ultraviolet Laser Beams, Fifth International Symposium on Laser Precision Microfabrication, Proceedings of SPIE 2004, Vol. 5662, 221-231. Referans10 T. Canel, A.U. Kaya, B. Çelik, Parameter optimization of nanosecond laser for microdrilling on PVC by Taguchi method, Optics & Laser Technology, 2012, 44; 2347-2353
  10. Referans11 T. Canel, E. Kayahan, L. Candan, S. Fidan, T. Sınmazçelik, Influence of laser parameters in surface texturing of polyphenylene sulfide composites, J. Appl. Polym. Scı. 2019, Doi: 10.1002/App.47976
  11. Referans12 T. Canel, M. Zeren, T. Sınmazcelik, Laser parameters optimization of surface treating of Al 6082-T6 with Taguchi method, Optics & Laser Technology, 2019, 120; 105714
  12. Referans13 T. Canel, İ. Bağlan, T. Sinmazcelik, Mathematical modelling of laser ablation of random oriented short glass fiber reinforced Polyphenylene sulphide (PPS) polymer composite. Optics & Laser Technology, 2019, 115; 481-486
  13. Referans 14 T. Canel, İ. Bağlan, T. Sınmazçelik, Mathematical modeling of heat distribution on carbon fiber Poly(etherether-ketone) (PEEK) composite during laser ablation, Optics & Laser Technology, 2020, 127; 106190
  14. Referans15 T. Canel, İ. Bağlan, Mathematical Modelling of One Dimensional Temperature Distribution As A Function Of Laser Intensity On Carbon Fiber Reinforced Poly(Ether-Ether-Ketone)-(Peek) Composite, TWMS J. App. and Eng. Math. 2020, V.10, N.3, pp. 769-777