SavedAdd your journal

Journals / The Eurasia Proceedings of Educational and Social Sciences / 2026 / Volume: 7

LOW COST REAL-TIME MEASUREMENT OF THE ECG, SPO2 AND TEMPERATURE SIGNALS IN THE LABVIEW ENVIRONMENT FOR BIOMEDICAL TECHNOLOGIES EDUCATION

Samet Ciklacandir
Naciye Mulayim
Savas Sahin
Pages
—
Publication Date
2017-09-08
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The program also shows the patient's heart rate and alerts when the patient enters a heart attack.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Electrocardiography (ECG) is to measure the electrical activity of the heart.
📊
Key Findings & Data:Doctors diagnose various cardiac diseases by analyzing this signal.
💡
Conclusion & Impact:The program also shows the patient's heart rate and alerts when the patient enters a heart attack.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Real-Time Electrocardiography (ECG) · temperature · pulse oximeter

Abstract

Electrocardiography (ECG) is to measure the electrical activity of the heart. Doctors diagnose various cardiac diseases by analyzing this signal. The ECG signal is one of the best diagnostic devices for heart diseases. The purpose of this work is to display the ECG signal in the LabVIEW (Laboratory Virtual Instrument Engineering Workbench) environment. Lowering the cost by designing your own ECG circuit. The program can also easily process the ECG signal in various ways. There is no need to setup any electronic circuit. In addition to the ECG signal, modules with pulse oximeter and temperature indicating oxygen saturation are added. In this study, low cost ECG, temperature and pulse measurements were performed in our own laboratory environment. The measurement circuit was communicated with the LabVIEW program via Arduino. The data received with Arduino is shown after processing in the LabVIEW environment. The program also shows the patient's heart rate and alerts when the patient enters a heart attack.

🔖

Cite This Article

Ciklacandir, S., Mulayim, N., Sahin, S. (2017). LOW COST REAL-TIME MEASUREMENT OF THE ECG, SPO2 AND TEMPERATURE SIGNALS IN THE LABVIEW ENVIRONMENT FOR BIOMEDICAL TECHNOLOGIES EDUCATION. The Eurasia Proceedings of Educational and Social Sciences, Volume: 7. https://ajindex.com/articles/1550230

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Retrieved from https://en.wikipedia.org/wiki/Electrocardiography/
  2. Lascu, M., & Lascu, D. (2007, August). LabVIEW based biomedical signal acquisition and processing. In Proceedings of the 7th WSEAS Int Conf on Signal Processing, Computational Geometry and Artificial Vision, Athens, Greece. 2007Aug (pp. 24-26).
  3. Olansen, J. B., & Rosow, E. (2001). Virtual bio-instrumentation: biomedical, clinical, and healthcare applications in LabVIEW. Pearson Education. Retrieved from http://makezine.com/projects/ir-pulse-sensor/
  4. Mohamad, A. S., & Noor, H. M. (2014, August). Development of smart ECG machine using LabVIEW for biomedical engineering students. In Engineering Technology and Technopreneuship (ICE2T), 2014 4th International Conference on (pp. 320-323). IEEE.