Journals / Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2023 / Cilt: 6 Sayı: Ek Sayı

Forgiving Road Design and Improvement of Accident Black Spots: A Case Study for Düzce City

Affeden Yol Tasarımı ve Kaza Kara Noktalarının İyileştirilmesi; Düzce Örnek Durum İncelemesi

Sercan Serin(Osmaniye Korkut Ata Üniversitesi)
Yakup Önal(OSMANIYE KORKUT ATA UNIVERSITY)0000-0003-4975-9897
Cafer Kayadelen(OSMANIYE KORKUT ATA UNIVERSITY)0000-0003-2955-013X
Pages
105–118
Publication Date
2023-12-20
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Considering the forgiving road design features on a total of three highway sections, on-site investigations were made, and recommendations were made.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of changing the causes and consequences of traffic accidents, preventing possible human deaths, and providing more comfortable navigational safety is a common situation especially in the highway sections of our country where traffic accidents occur frequently.
📊
Key Findings & Data:In the study, the concept of the forgiving road, which was brought to the agenda of our country by the General Directorate of Highways (KGM) in 2013 and still has problems in implementation, was examined.
💡
Conclusion & Impact:Considering the forgiving road design features on a total of three highway sections, on-site investigations were made, and recommendations were made.
🔬Design:Araştırma Makalesi
📍Scope:2013 Verileri
⚙️Variables:Kaza kara noktası · Affeden yol · Yol kenar güvenliği

Abstract

The aim of changing the causes and consequences of traffic accidents, preventing possible human deaths, and providing more comfortable navigational safety is a common situation especially in the highway sections of our country where traffic accidents occur frequently. In the study, the concept of the forgiving road, which was brought to the agenda of our country by the General Directorate of Highways (KGM) in 2013 and still has problems in implementation, was examined. Investigations have been made on the highway sections where the same type of accidents occur frequently, and it has been emphasized how these highway sections can be forgiving roads. A correct and planned road design or improvement will directly contribute to a dramatic reduction in accident rates. In this context, three different accident points that need improvement within KGM have been determined. Considering the forgiving road design features on a total of three highway sections, on-site investigations were made, and recommendations were made.

Özet

Bu noktada, trafik kazalarının neden ve sonuçlarını değiştirmek, olası insan ölümlerinin önüne geçmek, daha konforlu seyir güvenliğini sağlamak amacı, özellikle trafik kazalarının sık gerçekleştiği ülkemiz karayolu kesimlerinde olağan bir durum teşkil etmekle birlikte; yapılan çalışma da, ülkemiz gündemine 2013 yılında Karayolları Genel Müdürlüğü tarafından getirilen ve halen uygulama konusunda aksaklıkları bulunan affeden yol kavramı irdelenmiştir. Aynı tip kazaların sık gerçekleştiği kara yolu kesimlerinde incelemeler yapılmış, bu karayolu kesimlerinin nasıl affeden yol olabileceği üzerinde durulmuştur. Doğru ve planlı bir yol tasarımı veya iyileştirmesi, kaza oranlarının büyük ölçüde azalmasına doğrudan katkıda bulunacaktır. Bu kapsamda Karayolları Genel Müdürlüğü tarafından belirlenen, 2016 yılı içerisinde iyileştirilmesi gereken 2 kaza kara noktası ve kaza kara noktası olma potansiyeline sahip 1 nokta belirlenmiştir. Toplam üç karayolu kesimi üzerinde affedici yol tasarım özellikleri göz önünde bulundurularak yerinde incelemeler yapılmış, tavsiyelerde bulunulmuştur.

🔖

Cite This Article

Serin, S., Önal, Y., Kayadelen, C., Mutlu, M. F. (2023). Forgiving Road Design and Improvement of Accident Black Spots: A Case Study for Düzce City. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 6 Sayı: Ek Sayı, 105–118. https://doi.org/10.47495/okufbed.1184457

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Armour, M., & McLean, J. R. (1983). Effect of Shoulder Width and Type on Rural Traffic Safety and Operations. Australian road research, 13(4), 259-270.
  2. Atahan, A.O. (2003). Otokorkuluk Bitim Noktalarında Kullanılan Enerji Absorbe Edici Mekanizmalar. IV. Ulaşım ve Trafik Kongresi, Ankara.
  3. Ergün, G. (1999). Yol Emniyetini Geliştirme Programı: Türkiye İçin Bir Strateji Önerisi. II. Ulaşım ve Trafik Kongresi, Ankara.
  4. Güçmen, Ö. (1975). Karayolu Ulaşımında Güvenlik Sorununun Başlıca Yönleri ile Genel İncelemesi. Doçentlik Tezi, İTÜ, İstanbul.
  5. Kahramangil, M., & Şenkal, Ş. (1999). Kaza kara noktaları belirleme yöntemleri. II. Ulaşım ve Trafik Kongresi–Sergisi. Ankara.
  6. Karaşahin, M., & Bağırgan, N. (2007). Şehirlerarasi Bölünmemiş Karayollarinda Şerit ve Banket Genişliğinin Karayolu Güvenliğine Etkisi. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 13(2), 265-272.
  7. Karayolu Tasarımı Raporu (KTR), (2000). Yol Kenarı Alanları ve Otokorkuluklar ile İlgili Olarak Önerilen Tasarım Esasları, Ek3-S20, Haziran.
  8. Kihlberg, J. K., & Tharp, K. J. (1968). Accident rates as related to design elements of rural highways. NCHRP Report, (47).
  9. La Torre, F. (2012). Forgiving roadsides design guide (No. 2013/09).
  10. Türkiye Cumhuriyeti Karayolu İyileştirme ve Trafik Güvenliği Projesi (KİTGİ). (2001). Türkiye için Ulusal Trafik Güvenliği Programı, Aralık, Ankara.
  11. Thomson, R., Fagerlind, H., Martinez, A. V., Amengual, A., Naing, C. L., Hill, J., & Garcia, J. M. (2006a). Roadside infrastructure for safer European roads: D06 European best practice for roadside design: guidelines for roadside infrastructure on new and existing roads.
  12. Thompson, R., Martinez, A., Naing, C., Hoschopf, H., Dupre, G., Bisson, O., & Garcia, J. (2006b). European Best Practice for Roadside Design: Guidelines for Roadside Infrastructure on New and Existing Roads.
  13. Zegeer, C. V., Twomey, J. M., Heckman, M. L., & Hayward, J. C. (1992). Safety Effectiveness of Highway Design Features. Volume II: Alignment (No. FHWA-RD-91-045).
  14. Zegeer, C. V., Stewart, R., Council, F., & Neuman, T. R. (1994). Accident relationships of roadway width on low-volume roads. Transportation Research Record, 160-160.