Journals / Konya Mühendislik Bilimleri Dergisi / 2026 / Volume: 22 Issue: 1

THE STUDY OF THE CRYSTALLINE STRUCTURE OF THE PHASES IN THE AL-NI ALLOYS ULTRARAPID SOLIDIFICATION BY THE METHOD OF X RAY DIFFRACTION

Pages
45–48
Publication Date
2007-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This technique permit to observe highlighting the imperfections in the crystal pattern.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Melt –spinning and melt extraction methods of rapid solidification have been applied on Al-Ni alloys in the lower and higher composition.
📊
Key Findings & Data:The cooling speed calculated on the basis of the thermic transfer coefficient in accordance with the thickness of the fibers has lead to values of the cooling speed of the one million C/sec for fibres of 100 micrometers.
💡
Conclusion & Impact:This technique permit to observe highlighting the imperfections in the crystal pattern.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:THE STUDY · OF THE CRYSTALLINE · STRUCTURE OF THE PHASES IN THE AL-NI ALLOYS ULTRARAPID SOLIDIFICATION

Abstract

Melt –spinning and melt extraction methods of rapid solidification have been applied on Al-Ni alloys in the lower and higher composition. For orientate appreciations of the peripheric speed of the cooling disk it is used the dependence between the thickness of the solidified fibers and the peripheric speed of the extraction disk. The cooling speed calculated on the basis of the thermic transfer coefficient in accordance with the thickness of the fibers has lead to values of the cooling speed of the one million C/sec for fibres of 100 micrometers. Alloys with 1,86 % Ni content in pouring status and ultra-rapid solidificated have been analysed from the point of crystalline structure. The paper it’s a short analysis of the use of the X-ray diffraction techniques for observing the effects of ultra-rapid solidification in Al-Ni alloys. This technique permit to observe highlighting the imperfections in the crystal pattern.

🔖

Cite This Article

Crıstea, L., Otlacan, E., Crıstea, E. (2007). THE STUDY OF THE CRYSTALLINE STRUCTURE OF THE PHASES IN THE AL-NI ALLOYS ULTRARAPID SOLIDIFICATION BY THE METHOD OF X RAY DIFFRACTION. Konya Mühendislik Bilimleri Dergisi, Volume: 22 Issue: 1, 45–48. https://ajindex.com/articles/1522380

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...