Finally, in the study, the crystallinity values obtained from the XRD patterns of the pure blend film and the composite films were compared.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, shape-memory and biodegradable poly lactic acid (PLA) and poly hydroxy alkanoate (PHA) were mixed in a 1:1 ratio and films were obtained by solvent casting method.
📊
Key Findings & Data:Then, cadmium (Cd) microparticles were added to the PLA/PHA blend at different rates and the composite films were prepared using the same method.
💡
Conclusion & Impact:Finally, in the study, the crystallinity values obtained from the XRD patterns of the pure blend film and the composite films were compared.
In this study, shape-memory and biodegradable poly lactic acid (PLA) and poly hydroxy alkanoate (PHA) were mixed in a 1:1 ratio and films were obtained by solvent casting method. Then, cadmium (Cd) microparticles were added to the PLA/PHA blend at different rates and the composite films were prepared using the same method. PLA/PHA/Cd composite films were characterized by Attenuated Total Reflection-Infrared (ATR-IR) spectroscopy, Thermogravimetric analysis (TGA), Scanning Electron Microscopy (SEM), and X-ray Diffraction (XRD). Finally, in the study, the crystallinity values obtained from the XRD patterns of the pure blend film and the composite films were compared.
Pekdemir, M. E., Pekdemir, S. S., Kavum, A., Altun, S. (2024). IR spectroscopy, thermal characterization and X-ray diffraction of Cd microparticles doped PLA/PHA composite films. Journal of Physical Chemistry and Functional Materials, Volume: 7 Issue: 2. https://doi.org/10.54565/jphcfum.1535452
Y. Dağlıoglu. Nanopartikül karakterizasyon yöntemleri ve ekotoksisite deneylerindeki önemi. Marmara Fen Bilimleri Dergisi. 2018;30(1):1-17.
M. Sajid and J. Płotka-Wasylka. Nanoparticles: Synthesis, characteristics, and applications in analytical and other sciences. Microchemical Journal. 2020;154:104623.
T. Gérard and T. Budtova, editors. PLA-PHA blends: morphology, thermal and mechanical properties. International Conference on Biodegradable and Biobased Polymers-BIOPOL 2011; 2011.
E. Özen Öner, M. E. Pekdemir, E. Ercan, Y. Say, M. Kök and Y. Aydoğdu. Novel of (PLA/PCL blend)/Gd2O3 rare earth oxide nanocomposites: Shape memory effect, thermal, magnetic, and mechanical properties. Polymer Composites. 2022;43(5):3096-3103.
Ş. N. Erkul and S. Uçaroğlu. TOPRAKLARDA POLİLAKTİK ASİTİN (PLA) BİYOBOZUNMASI. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi. 2023;28(1):25-40.
Y. Poirier, C. Nawrath and C. Somerville. Production of polyhydroxyalkanoates, a family of biodegradable plastics and elastomers, in bacteria and plants. Bio/technology. 1995;13(2):142-150.
A. Getachew, A. Berhanu and A. Birhane. Production of sterilized medium chain length polyhydroxyalkanoates (Smcl-PHA) as a biofilm to tissue engineering application. J Tissue Sci Eng. 2016;7(2):1-9.
M. Nanda Prakash, A. Manjunath and R. Somashekar. Studies on AC electrical conductivity of CdCl2 doped PVA polymer electrolyte. Advances in Condensed Matter Physics. 2013;2013(1):690629.
B. M. Baraker and B. Lobo. Multistage thermal decomposition in films of cadmium chloride-doped PVA–PVP polymeric blend. Journal of Thermal Analysis and Calorimetry. 2018;134:865-878.
B. M. Baraker and B. Lobo. UV irradiation induced microstructural changes in CdCl 2 doped PVA–PVP blend. Journal of Materials Science: Materials in Electronics. 2018;29:4106-4121.
S. S. Pekdemir, D. Yilmaz, S. Y. Kuzu and M. E. Pekdemir. Characterization and radiation shielding efficiency of MWCNT/shape memory ternary blend composite films. Radiation Physics and Chemistry. 2024;222:111813.
S. Pekdemir, E. Özen Öner, M. E. Pekdemir, S. Dalkılıç and L. Kadıoğlu Dalkılıç. An investigation into the influence of C. moschata leaves extract on physicochemical and biological properties of biodegradable PCL/PLA blend film. Journal of Polymers and the Environment. 2022;30(9):3645-3655.
M. E. Pekdemir, M. Kaya, M. Coşkun, Y. Aydoğdu, M. Kök and S. Y. Kuzu. Physicochemical properties of magnetically enhanced shape memory polymer composites doped with NiMnGa. Journal of Polymer Research. 2023;30(8):293.
M. Coşkun, M. Kök and M. E. Pekdemir. Shape Memory Materals Based on a NiMnSb Alloy and Polylactic Acid/Polyhydroxyalkanoate: Evaluation of The Chemical And Physical Properties. ChemistrySelect. 2024;9(20):e202303992.
M. Kök, M. E. Pekdemir, C. Tatar, B. Karagülle, S. Selçuk Pekdemir, B. Tatar and E. Özen Öner. Effect of Ag Nanoparticle on PLA/PEG Blend: A Study of Physical, Thermal Characterization, Shape Memory Assessment and Antimicrobial Properties. Iranian Journal of Science. 2024:1-9.
J. Zhang, H. Tsuji, I. Noda and Y. Ozaki. Structural changes and crystallization dynamics of poly (L-lactide) during the cold-crystallization process investigated by infrared and two-dimensional infrared correlation spectroscopy. Macromolecules. 2004;37(17):6433-6439.
A. Arumugam, P. Yogalaksha, M. Furhanashereen and V. Ponnusami. Statistical optimization and enhanced synthesis of polyhydroxyalkanoates from Ceiba pendantra oil as novel non-edible feedstock. Biomass Conversion and Biorefinery. 2020:1-10.
L. I. Mondragón-Herrera, R. Vargas-Coronado, H. Carrillo-Escalante, J. Cauich-Rodríguez, F. Hernández-Sánchez, C. Velasco-Santos and F. Avilés. Mechanical, Thermal, and Physicochemical Properties of Filaments of Poly (Lactic Acid), Polyhydroxyalkanoates and Their Blend for Additive Manufacturing. Polymers. 2024;16(8):1062.
S. Selcuk Pekdemir, B. Karagulle, M. E. Pekdemir, R. Taş, E. Aksoy and D. Aydin. A novel green synthesis approach for shape memory polymer nanocomposites decorated with silver nanoparticles. Polymer Engineering & Science. 2023;63(12):3986-3997.
G. Torğut and N. Gürler. Nanofiller reinforced biodegradable PHA/PLA composites: physico-chemical, thermal and dielectric properties. Journal of Polymer Research. 2021;28(12):452.
N. Qutub and S. Sabir. Optical, thermal and structural properties of CdS quantum dots synthesized by a simple chemical route. International Journal of Nanoscience and Nanotechnology. 2012;8(2):111-120.
A. Stanley, P. K. Murthy and S. Vijayendra. Characterization of polyhydroxyalkanoate produced by Halomonas venusta KT832796. Journal of Polymers and the Environment. 2020;28(3):973-983.
T. Pimentel, L. Pizzuti, F. M. Fakhouri, L. H. I. Mei and G. G. Fonseca. Development of multilayer films obtained from epoxidized methyl esters, polyhydroxyalkanoates and their combinations. Journal of Polymers and the Environment. 2018;26:1661-1672.
R. Sahraei, A. Mihandoost, G. Nabiyouni, A. Daneshfar, M. Roushani and M. Majles Ara. Room temperature synthesis and characterization of ultralong Cd (OH) 2 nanowires: a simple and template-free chemical route. Applied Physics A. 2012;109:471-475.
M. Chen and L. Gao. From Cd (OH) 2 nanoflakes to CdSe nanochains: synthesis and characterization. Journal of crystal growth. 2006;286(2):228-234.
I. N. Qader, M. E. PekdemIr, M. COŞKUN, M. S. Kanca, M. KÖK and F. DAĞDELEN. Biocompatible PLA/PCL blends nanocomposites doped with nanographite: Physico-chemical, and thermal behaviour. Journal of Polymer Research. 2022;29(7):264.