SavedAdd your journal

Journals / Journal of Advances in Manufacturing Engineering / 2026 / Volume: 6 Issue: 1

Investigation of the ultrasonic effect on surface topography of WC-Co in grinding operation with different cutting variants

Tayfur Yavuzbarut(Nedu Bağlantı Elemanları San. ve Tic. A.Ş., Norm Tooling R&D Center)0000-0001-5003-168X
Emre Sandal(Nedu Bağlantı Elemanları San. ve Tic. A.Ş., Norm Tooling R&D Center)0000-0002-0798-6875
Kemal Bartu Aydın(Nedu Bağlantı Elemanları San. ve Tic. A.Ş., Norm Tooling R&D Center)0000-0001-5980-9515
Pages
—
Publication Date
2025-06-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, the surface properties of specimens processed with and without ultrasonic effect were compared.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Tungsten carbide-cobalt (WC-Co) is a composite material consisting of WC as the main phase along with Co as a soft binder metal.
📊
Key Findings & Data:In this study, WC-25Co material was grinded in different cutting tool angles with Ultrasonic 20 (DMG Mori) machine.
💡
Conclusion & Impact:As a result, the surface properties of specimens processed with and without ultrasonic effect were compared.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:ultrasonic-assisted grinding · tungsten carbide-cobalt · surface integrity

Abstract

Tungsten carbide-cobalt (WC-Co) is a composite material consisting of WC as the main phase along with Co as a soft binder metal. It is difficult to process due to its extreme wear resistance and high hardness. Hence, many non-conventional production methods, such as electrical discharge machining and ultrasonic-assisted machining operation, have been found to achieve this. The article is focused on processing WC-Co machining with ultrasonic-assisted grinding (UAG) operation. In this study, WC-25Co material was grinded in different cutting tool angles with Ultrasonic 20 (DMG Mori) machine. Each of cutting tool angle during grinding corresponds distinct operations. Hence, the effect of the ultrasonic factor and cutting direction during grinding on the surface integrity of workpiece was investigated. The ultrasonic oscillation was introduced as on/off in each condition while the remaining parameters were kept constant. After processing, the changes in the specimen surfaces were examined via scanning electron microscopy (SEM) and surface roughness values. As a result, the surface properties of specimens processed with and without ultrasonic effect were compared.

🔖

Cite This Article

Yavuzbarut, T., Sandal, E., Aydın, K. B. (2025). Investigation of the ultrasonic effect on surface topography of WC-Co in grinding operation with different cutting variants. Journal of Advances in Manufacturing Engineering, Volume: 6 Issue: 1. https://doi.org/10.14744/ytu.jame.2025.00003

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (22)

  1. Adıyaman, O., & Sönmez, F. (2020). Investigation of the effect of grinding parameters on surface roughness by experimental design method in new type grinding method. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 9(1), 215–225. [Turkish] [CrossRef]
  2. Sudarsan, D., Bejaxhin, A. B. H., & Rajkumar, S. (2024). Enhancing CNC turning efficiency of aluminium 7071 alloy using Taguchi method and L27 array. International Journal of Precision Engineering and Manufacturing, 26, 177–194. [CrossRef]
  3. Srinivasan, V. P., Sandeep, C., Shanthi, C., & Others. (2022). Comparative study on EDM parameter optimization for adsorbed Si₃N₄-TiN using TOPSIS and GRA coupled with TLBO algorithm. Adsorption Science & Technology, 2022, 4112448. [CrossRef]
  4. Babu, R. D., Gurusamy, P., Bejaxhin, A. B. H., & Chandramohan, P. (2023). Influences of WEDM constraints on tribological and microstructural depictions of SiC-Gr strengthened Al2219 composites. Tribology International, 185, Article 108478. [CrossRef]
  5. Mahesh, G., Valavan, D., Baskar, N., & Bejaxhin, A. B. H. (2024). Reduction of cutting temperature effect and surface deficiencies on CNC turned AZ91 Mg alloy with fluidized nano oxide coolants. Tehnički Vjesnik, 31, 1360– 1366. [CrossRef]
  6. Jiao, Y., Hu, P., Pei, Z. J., & Treadwell, C. (2005). Rotary ultrasonic machining of ceramics: Design of experiments. International Journal of Manufacturing Technology and Management, 7(2–4), 192–206. [CrossRef]
  7. Churi, N. (2010). Rotary ultrasonic machining of hard-to-machine materials (Doctoral dissertation). Kansas State University.
  8. Greenlee, R. E., Bickley, W., & Illiam, H. (1962). Ultrasonic-assisted grinding: A possible new method for machining space age materials. Journal of Engineering for Industry, 84(1), 33–38.
  9. Singh, R. P., & Singhal, S. (2016). Rotary ultrasonic machining: A review. Materials and Manufacturing Processes, 31(15), 1795–1824. [CrossRef]
  10. Feucht, F., Ketelaer, J., Wolff, A., Mori, M., & Fujishima, M. (2014). Latest machining technologies of hard-to-cut materials by ultrasonic machine tool. Procedia CIRP, 14, 148–152. [CrossRef]
  11. Wdowik, R., Porzycki, J., & Magdziak, M. (2017). Measurements of surface texture parameters after ultrasonic assisted and conventional grinding of ZrO₂ based ceramic material characterized by different states of sintering. Procedia CIRP, 62, 293–298. [CrossRef]
  12. Gong, H., Fang, F. Z., & Hu, X. T. (2010). Kinematic view of tool life in rotary ultrasonic side milling of hard and brittle materials. International Journal of Machine Tools and Manufacture, 50(4), 303–307. [CrossRef]
  13. Kuruc, M., Kusý, M., Šimna, V., & Peterka, J. (2016). Influence of machining parameters on surface topography of cubic boron nitride at rotary ultrasonic machining. Key Engineering Materials, 686, 180–185. [CrossRef]
  14. Kataria, R., Singh, R. P., & Kumar, J. (2016). An experimental study on ultrasonic machining of tungsten carbide-cobalt composite materials. AIMS Materials Science, 3(4), 1391–1409. [CrossRef]
  15. Feng, H., Xiang, D., Wu, B., & Zhao, B. (2019). Ultrasonic vibration-assisted grinding of blind holes and internal threads in cemented carbides. The International Journal of Advanced Manufacturing Technology, 104(5–8), 1357–1367. [CrossRef]
  16. Uhlmann, E., Protz, F., & Sassi, N. (2021). Ultrasonic assisted drilling of cemented carbide. Procedia CIRP, 101, 222–225. [CrossRef]
  17. Qi, H., Qin, S., Cheng, Z., & Others. (2021). DEM and experimental study on the ultrasonic vibration-assisted abrasive finishing of WC-8Co cemented carbide cutting edge. Powder Technology, 378, 716–723. [CrossRef]
  18. Huang, K., Deng, J., & Zhang, X. (2021, November). Development of a rotary ultrasonic machining device and its application in cemented carbide mold machining. In International Conference on Nanomanufacturing (pp. 140–153). Springer Singapore. [CrossRef]
  19. Li, Z. C., Jiao, Y., Deines, T. W., & Others. (2005). Rotary ultrasonic machining of ceramic matrix composites: Feasibility study and designed experiments. International Journal of Machine Tools and Manufacture, 45(12–13), 1402–1411. [CrossRef]
  20. Abdo, B. M. A., Darwish, S. M., Al-Ahmari, A. M., & El-Tamimi, A. M. (2013). Optimization of process parameters of rotary ultrasonic machining based on Taguchi’s method. Advanced Materials Research, 748, 273–280. [CrossRef]
  21. Ji, N., Zhang, J., Liu, M., Dai H, Ding K, Yu J, & Zhang X. (2023). Experimental investigation of ultrasonic vibration-assisted grinding of HVOF-sprayed WC-10Co-4Cr coating. Coatings, 13(10), Article 1788. [CrossRef]
  22. Zhou, W., Tang, J., Chen, H., & Shao, W. (2019). A comprehensive investigation of surface generation and material removal characteristics in ultrasonic vibration assisted grinding. International Journal of Mechanical Sciences, 156, 14–30. [CrossRef]