SavedAdd your journal

Journals / International Journal of Aviation Science and Technology / 2026 / Volume: 07 Issue: 01

Aviation Maintenance Efficiency: A study on the Design and Analysis an Ergonomic Helicopter Maintenance Platform with Design Thinking

Burhan Şahin(YILDIRIM BEYAZIT UNIVERSITY)0000-0002-8777-7925
Merve Karataş(YILDIRIM BEYAZIT ÜNİVERSİTESİ)0009-0003-2859-4787
Pages
—
Publication Date
2026-07-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Simulations confirmed that the developed platform will facilitate safe operations for maintenance technicians while increasing overall operational efficiency.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the aviation industry, the effectiveness, safety, and ergonomics of maintenance procedures are essential for ensuring the secure operation of aircraft.
📊
Key Findings & Data:In the study conducted using the Design Thinking methodology, the needs and working conditions of the maintenance personnel were prioritized, and a human-centered approach was adopted in the design process so that personnel weighing 120 kg and 190 cm tall could work safely.
💡
Conclusion & Impact:Simulations confirmed that the developed platform will facilitate safe operations for maintenance technicians while increasing overall operational efficiency.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Helicopter maintenance · design thinking · U-profile design

Abstract

In the aviation industry, the effectiveness, safety, and ergonomics of maintenance procedures are essential for ensuring the secure operation of aircraft. This research presents the design of a foldable and retractable maintenance platform aimed at enhancing the ergonomics and functionality of platforms utilized in helicopter maintenance tasks. In the study conducted using the Design Thinking methodology, the needs and working conditions of the maintenance personnel were prioritized, and a human-centered approach was adopted in the design process so that personnel weighing 120 kg and 190 cm tall could work safely. The evaluation included three different materials: Al 7075, steel and titanium. As a result of the static analysis performed for each material, a maximum stress of 330 MPa was achieved with the 2 mm thick Al 7075 material, which was considered safe by remaining below the yield strength of 503 MPa. Furthermore, the structure was optimized in terms of both strength and lightness by incorporating U-profiles into the platform design. Simulations confirmed that the developed platform will facilitate safe operations for maintenance technicians while increasing overall operational efficiency. This research seeks to address existing gaps in literature by offering ergonomic design solutions within the realm of aviation maintenance. The design exemplifies the effectiveness of the Design Thinking approach in the aviation maintenance sector and proposes a practical solution to enhance maintenance processes.

🔖

Cite This Article

Şahin, B., Karataş, M. (2026). Aviation Maintenance Efficiency: A study on the Design and Analysis an Ergonomic Helicopter Maintenance Platform with Design Thinking. International Journal of Aviation Science and Technology, Volume: 07 Issue: 01. https://ajindex.com/articles/1493672

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (30)

  1. Adamides, E.D., Stamboulis, Y.A. and Varelis, A.G., 2004. Model-based Assessment of Military Aircraft Engine Maintenance Systems. Journal of the Operational Research Society, 55(9), pp.957–967.
  2. Airbus, 2007, Hamburg: Industrie Ausschuss Struktur Berechnungsunterlagen, HSB Handbuch Struktur Berechnung.
  3. Al-Haidary, J.T., Haddad, J.S., Alfaqs, F.A. and Zayadin, F.F., 2020. Susceptibility of Aluminum Alloy 7075 T6 to Stress Corrosion Cracking. SAE International Journal of Materials and Manufacturing, 14(2).
  4. Bergh, J.V. den, Bruecker, P.D., Jeroen Belien and Peeters, J., 2013. Aircraft maintenance operations: State of the art. HUB Research Paper.
  5. Bernard, F., Bonnardel, X., Paquin, R., Petit, M., Marandel, K., Bordin, N. and Bonnardel, F., 2021. Digital Simulation Tools in Aviation Maintainability Training. Computer Applications in Engineering Education, 30(2).
  6. Bernard, F., Zare, M., Sagot, J. and Paquin, R., 2019. Integration of Human Factors into the Design Process of Helicopter Maintainability. Human Factors and Ergonomics in Manufacturing & Service Industries, 29(4), pp.350–360.
  7. Dereli, T., Yılmaz, M.K., Ertürk, B., Demirbaş, A.D. and Altuntaş, S.A., 2017. Havacılık Sektöründe Bakım Kolaylığı İçin Yaratıcı Problem Çözme Teorisi Uygulamaları. Deu Muhendislik Fakultesi Fen Ve Muhendislik, 19(55), pp.211–228.
  8. Henriksen, D., Richardson, C. and Mehta, R., 2017. Design thinking: a Creative Approach to Educational Problems of Practice. Thinking Skills and Creativity, 26, pp.140–153.
  9. Hoque, M.E., Noor, S.S., Ferdous, O. and Sultana, M.M., 2017. An investigation of the behavior of mechanical structures due to vibration using ANSYS. Proceedings of the International Conference on Mechanical Engineering and Renewable Energy, Chittagong, Bangladesh, pp.18-20.
  10. Igor Kabashkin, 2024. Unified Aviation Maintenance Ecosystem on the Basis of 6G Technology. Electronics, 13(19).
  11. Jardine, A.K.S., Lin, D. and Banjevic, D., 2006. A Review on Machinery Diagnostics and Prognostics Implementing condition-based Maintenance. Mechanical Systems and Signal Processing, 20(7), pp.1483–1510.
  12. Latorella, K.A. and Prabhu, P.V., 2000. A Review of Human Error in Aviation Maintenance and Inspection. International Journal of Industrial Ergonomics, 26(2), pp.133–161.
  13. Liao, C., Ruan, J., Liu, C., Du, Z., Wen, W. and Zhou, T., 2015. Helicopter Live-Line Work on 1000-kVUHV Transmission Lines. IEEE Transactions on Power Delivery, 31(3), pp.982–989.
  14. Liedtka, J., 2015. Perspective: Linking Design Thinking with Innovation Outcomes through Cognitive Bias Reduction. Journal of Product Innovation Management, [online] 32(6), pp.925–938.
  15. Liu, Y., Zhang, W., Cheng, Q. and Ming, D., 2023. Efficient Reachable Workspace Division under Concurrent Task for Human-Robot Collaboration Systems. Applied Sciences, 13(4).
  16. Lockett, H.L., Estefani, J. and Reytérou, E., (2012). An Aircraft Design for Maintainability Methodology Integrated with Computer Aided Design, paper presented at the 1st International Through-Life Engineering Services Conference, 5-6 November, Cranfield University, Shrivenham, UK, pp.43-50, available at: https://dspace.lib.cranfield.ac.uk/items/202cfcc4-fe03-49d5-95f6-5d9b5706b1dd
  17. Raja, T., Prabhakaran, R., Praveen Kumar, D. and Sathish, D., 2022. Mechanical and tribological characteristics of AL7075/MWCNT, B4C & MoS2 hybrid metal matrix composites. Materials Today: Proceedings, 50, pp.911–916.
  18. Ren, B., Liu, Z. and Chen, Y., 2021. Research on Maintainability Verification Technology of Civil Aircraft. In: 2021 Global Reliability and Prognostics and Health Management. Nanjing, China: IEEE.
  19. Samal, S.K., Vishwanatha, H.M., Saxena, K.K., Behera, A., Nguyen, T.A., Behera, A., Prakash, C., Dixit, S. and Mohammed, K.A., 2022. 3D-Printed Satellite Brackets: Materials, Manufacturing and Applications. Crystals, 12(8), p.1148.
  20. Senthil Kumar, S., Bibin, C. and Ramachandran, M., 2020. Design and Analysis of Hydrogen Storage Tank with Different Materials by Ansys. IOP Conference Series: Materials Science and Engineering, 810(1), p.012016.
  21. Shanmugam, A. and Paul Robert, T., 2015. Human Factors Engineering in Aircraft maintenance: a Review. Journal of Quality in Maintenance Engineering, 21(4), pp.478–505.
  22. Starke, E.A. and Staley, J.T., 1996. Application of modern aluminum alloys to aircraft. Progress in Aerospace Sciences, 32(2-3), pp.131–172.
  23. Tekaat, J.L., Anacker, H. and Dumitrescu, R., 2021. The Paradigm of Design Thinking and Systems Engineering in the Design of Cyber-Physical Systems: a Systematic Literature Review. International Symposium on Systems Engineering (ISSE), Vienna, Austria, pp.1-8.
  24. Verhagen, W.J.C., Santos, B.F., Freeman, F., van Kessel, P., Zarouchas, D., Loutas, T., Yeun, R.C.K. and Heiets, I., 2023. Condition-Based Maintenance in Aviation: Challenges and Opportunities. Aerospace, 10(9), p.762.
  25. Xia, J., 2024. Virtual Maintenance Simulation Technology in Civil Aircraft Engineering. Journal of Physics Conference Series, 2691(1).
  26. Yılmaz, D. and Özkol, İ., 2017. A New Method for Aircraft Maintainability Allocation. International Journal of Mechanical Engineering and Robotics Research, 6(6), pp.93–99.
  27. Zhang, H., Wu, Z. and Xu, Q., 2020. Design of a New XY Flexure Micropositioning Stage with a Large Hollow Platform. Actuators, 9(3), p.65.
  28. Bergh, J.V. den, Bruecker, P.D., Jeroen Belien and Peeters, J., 2013. Aircraft maintenance operations: State of the art. HUB Research Paper.
  29. Dereli, T., Yılmaz, M.K., Ertürk, B., Demirbaş, A.D. and Altuntaş, S.A., 2017. Havacılık Sektöründe Bakım Kolaylığı İçin Yaratıcı Problem Çözme Teorisi Uygulamaları. Deu Muhendislik Fakultesi Fen Ve Muhendislik, 19(55), pp.211–228.
  30. Ren, B., Liu, Z. and Chen, Y., 2021. Research on Maintainability Verification Technology of Civil Aircraft. In: 2021 Global Reliability and Prognostics and Health Management. Nanjing, China: IEEE.