Journals / Environmental Research and Technology / 2026 / Volume: 1 Issue: 1

Copper Removal From Ammoniacal Spent Etchant by Using Magnetic Nanoparticles

Oumer Ali Yassin(Marmara University)
Zehra Semra Can(Marmara University)
Seval Genc(Marmara University)
Ebru Toksoy Oner(Marmara University)
Gul Gulenay Haciosmanoglu(Marmara University)
Pages
—
Publication Date
2018-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Experimental results showed that adsorption was achieved within 2 hours, and t he maximum amount of Cu 2+ ions adsorbed by unit weight of MNP was observed by chitosan coated MNP with an adsorption capacity of 125 mg/g.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Using magnetic nanoparticles (MNPs) is becoming popular method to remove heavy metal ions from different waste streams because it is simple, low-cost and effective.
📊
Key Findings & Data:In this study, the bare and polymer coated Magnetite Iron Oxide (Fe 3 O 4 ) MNPs were assessed for their adsorption capability in removing cupric ( cu 2+ ) ions from ammoniacal spent etchant solution, which is originated from the production of Printed Circuit boards (PCBs).
💡
Conclusion & Impact:Experimental results showed that adsorption was achieved within 2 hours, and t he maximum amount of Cu 2+ ions adsorbed by unit weight of MNP was observed by chitosan coated MNP with an adsorption capacity of 125 mg/g.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Copper Adsorption · Magnetic Nanoparticles · Printed Circuit Boards

Abstract

Using magnetic nanoparticles (MNPs) is becoming popular method to remove heavy metal ions from different waste streams because it is simple, low-cost and effective. In this study, the bare and polymer coated Magnetite Iron Oxide (Fe 3 O 4 ) MNPs were assessed for their adsorption capability in removing cupric ( cu 2+ ) ions from ammoniacal spent etchant solution, which is originated from the production of Printed Circuit boards (PCBs). The polymers used to coat the MNP in this study were chitosan, levan and oleic acid. The batch adsorption experiments were conducted at a temperature of 20 o C and the pH of the solution was between 9.0 and 9.5. Experimental results showed that adsorption was achieved within 2 hours, and t he maximum amount of Cu 2+ ions adsorbed by unit weight of MNP was observed by chitosan coated MNP with an adsorption capacity of 125 mg/g. In addition, Zeta potential measurements showed that all MNPs used in adsorption tests had negative surface charges at around pH 9.0. The more negatively surface charge MNPs the more copper ions they can adsorb. From this experiment it can be concluded that chitosan coated magnetic nanoparticle can be widely used for the removal of copper ions from water and wastewaters.

🔖

Cite This Article

Yassin, O. A., Can, Z. S., Genc, S., Oner, E. T., Haciosmanoglu, G. G. (2018). Copper Removal From Ammoniacal Spent Etchant by Using Magnetic Nanoparticles. Environmental Research and Technology, Volume: 1 Issue: 1. https://ajindex.com/articles/1479493

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Citation 1 Citation2