Journals / Environmental Research and Technology / 2026 / Volume: 5 Issue: 3

Optimizing the amount of concrete for the construction of wastewater stabilization ponds: A case study of Ayvadere, Trabzon, Türkiye

Hafiz Qasim Ali(KARADENİZ TEKNİK ÜNİVERSİTESİ)0000-0003-3077-910X
Osman Üçüncü(KARADENİZ TEKNİK ÜNİVERSİTESİ)0000-0002-8187-4046
Pages
—
Publication Date
2022-09-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is recommended that a small-scale application of the model be made to compare the results before applying it on a large scale.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Natural systems are a cost-effective way to clean wastewater from small communities.
📊
Key Findings & Data:Afterward, the optimization model was applied that further reduced the area by 11.46 %, hydraulic detention time by 11.47%, and concrete volume by 6.94% compared to the traditional approach.
💡
Conclusion & Impact:It is recommended that a small-scale application of the model be made to compare the results before applying it on a large scale.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Excel solver · generalized Reduced Gradient (GRG) Algorithm · optimization of concrete volume

Abstract

Natural systems are a cost-effective way to clean wastewater from small communities. This paper aims to use an optimization technique to minimize the volume of concrete needed to construct a facultative pond provided within a series of three ponds. A nonlinear constrained optimization model was written and then solved using one of the Add-Ins of MS office. The add-in used was Excel Solver, and the algorithm was generalized reduced gradient (GRG). Before applying the optimization model, wastewater stabilization ponds (WSPs) were de-signed using various configurations and arrangements. The best possible configuration that gave minimum area and hydraulic detention time was selected for the study area. Afterward, the optimization model was applied that further reduced the area by 11.46 %, hydraulic detention time by 11.47%, and concrete volume by 6.94% compared to the traditional approach. In both methods, effluents satisfy the Turkish class-B stand-ards for irrigation. It is recommended that a small-scale application of the model be made to compare the results before applying it on a large scale.

🔖

Cite This Article

Ali, H. Q., Üçüncü, O. (2022). Optimizing the amount of concrete for the construction of wastewater stabilization ponds: A case study of Ayvadere, Trabzon, Türkiye. Environmental Research and Technology, Volume: 5 Issue: 3. https://doi.org/10.35208/ert.1141587

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (18)

  1. S. Karbalaei, P. Hanachi, T.R. Walker, and M. Cole, “Occurrence, sources, human health impacts and mitigation of microplastic pollution,” Environmental science and pollution research, Vol. 25 (36), pp. 36046-36063, 2018. DOI: https://doi.org/10.1007/s11356-018-3508-7
  2. G. D. Gikas, and V.A. Tsihrintzis, “Stabilization pond systems for wastewater treatment: facility costs and environmental footprint assessment,” Global Nest Journal, Vol. 6 (2), pp. 374-384, 2014. Available online at: https://www.cabdirect.org/cabdirect/abstract/20143336612
  3. H. Awad, M. G. Alalm, and H. K. El-Etriby, “Environmental and cost life cycle assessment of different alternatives for improvement of wastewater treatment plants in developing countries,” Science of the Total Environment, Vol. 660, pp. 57-68, 2019. DOI: https://doi.org/10.1016/j.scitotenv.2018.12.386
  4. L. Flores, J. García, R. Pena, and M. Garfí, “Constructed wetlands for winery wastewater treatment: A comparative Life Cycle Assessment,” Science of the total environment, Vol. 659, pp. 1567-1576, 2019. DOI: https://doi.org/10.1016/j.scitotenv.2018.12.348
  5. S. Kalla, “Use of membrane distillation for oily wastewater treatment–a review,” Journal of Environmental Chemical Engineering, Vol. 9 (1), 104641, 2021. DOI: https://doi.org/10.1016/j.jece.2020.104641
  6. W. Li, X. Cheng, J. Xie, Z. Wang, and D. Yu, “Hydrodynamics of an in-pond raceway system with an aeration plug-flow device for application in aquaculture: an experimental study,” Royal Society open science, Vol. 6 (7), pp. 182061, 2019. DOI: https://doi.org/10.1098/rsos.182061
  7. D. Goodarzi, A. Mohammadian, J. Pearson, and S. Abolfathi, “Numerical modelling of hydraulic efficiency and pollution transport in waste stabilization ponds,” Ecological Engineering, Vol. 182, pp. 106702, 2022. DOI: https://doi.org/10.1016/j.ecoleng.2022.106702
  8. M. Li, H. Zhang, C. Lemckert, A. Roiko, and H. Stratton, “On the hydrodynamics and treatment efficiency of waste stabilisation ponds: From a literature review to a strategic evaluation framework,” Journal of Cleaner Production, Vol. 183, pp. 495-514, 2018. DOI: https://doi.org/10.1016/j.jclepro.2018.01.199
  9. A. Haupt, C. Marx, and A. Lerch, “Modelling Forward Osmosis Treatment of Automobile Wastewaters,” Membranes, Vol. 9 (9), pp. 106, 2019. DOI: https://doi.org/10.3390/membranes9090106
  10. D. Sadak, M. T. Ayvaz, and A. Elçi, “Allocation of unequally-weighted wastewater discharge loads using a simulation-optimization approach,” Journal of Hydrology, Vol. 589, pp. 125158, 2020. DOI: https://doi.org/10.1016/j.jhydrol.2020.125158
  11. F.C. Martinez, A.D. Salazar, A.L. Rojas, R.L. Rojas, and A.C.U. Sifuentes, “Elimination of fecal coliforms in stabilization lagoons with different arrangements,” Far East Journal of Applied Mathematics, Vol. 69, pp. 87–110, 2012. Available online at: http://www.pphmj.com/journals/fjam.htm
  12. D. Mara, Domestic wastewater treatment in developing countries. 1st Ed., Routledge, London, 2003. Available online at: https://doi.org/10.4324/9781849771023
  13. V.M. Sperling, Biological Wastewater Treatment Series: Waste Stabilization Ponds. IWA, London, Vol. 3, 2007. Available online at: https://www.iwapublishing.com/books/9781843391630/waste-stabilisation-ponds
  14. Tuik, “Belediye Su İstatistikleri, 2018.” Available. https://data.tuik.gov.tr/Bulten/Index?p=Belediye-Su-Istatistikleri-2018-30668 (Accessed on January 26, 2022)
  15. I. George, P. Crop, and P. Servais, “Fecal coliform removal in wastewater treatment plants studied by plate counts and enzymatic methods,” Water Research, Vol. 36, pp. 2607–2617, 2002. DOI: https://doi.org/10.1016/S0043-1354(01)00475-4
  16. T.C. Cumhurbaşkanliği Mevzuat Bilgi Sistemi “Resmî Gazete Tarihi: 18.08.2010, Sayısı: 27676 (Ek-1),” https://www.mevzuat.gov.tr/mevzuat?MevzuatNo=14217&MevzuatTur=7&MevzuatTertip=5 (Accessed on January 20, 2022).
  17. L.X. Coggins, J. Sounness, L. Zheng, M. Ghisalberti, and A. Ghadouani, “Impact of hydrodynamic reconfiguration with baffles on treatment performance in waste stabilisation ponds: A full-scale experiment,” Water, Vol. 10 (2), pp. 109, 2018. DOI: https://doi.org/10.3390/w10020109
  18. L. Philip, K. P. Kalaivani, Rosario, V. Krishna, and S. SriShalini, “Performance evaluation of anaerobic baffled biodigester for treatment of black water,” Current Science (00113891), Vol. 118 (8), pp. 102453, 2020. DOI: https://doi.org/10.1016/j.jwpe.2021.102453