Journals / Batman Üniversitesi Yaşam Bilimleri Dergisi / 2026 / Cilt: 5 Sayı: 1

Electrical Characterization Of Al/CuO/p-Si/Al MIS Photovoltaic Cells

Al/CuO/p-Si/Al Diyot Yapısının Elektriksel Özellikleri

Pages
40–53
Publication Date
2015-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The calculations suggest that the produced diode was a rectifier diode with photodiodes feature.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, The diode characteristics of the thin film of metal-oxide (CuO) was investigated.
📊
Key Findings & Data:Ideality factor (n) and barrier height (ΦB0) were calculated from conventional (I-V) characteristics of Al /CuO/p-Si /Al diode structure and series resistance values (Rs) were calculated by using Norde functions.
💡
Conclusion & Impact:The calculations suggest that the produced diode was a rectifier diode with photodiodes feature.
🔬Design:Makale
📍Scope:Comprehensive Sample
⚙️Variables:Schottky diyot · CuO ince filmler · Sol-jel döndürerek kaplama

Abstract

In this study, The diode characteristics of the thin film of metal-oxide (CuO) was investigated. Spin coating method was used to grow CuO nano-structured thin films interfaced between the metal and semiconductor and an diode structure of Al / CuO / p-Si / Al was produced. Ideality factor (n) and barrier height (ΦB0) were calculated from conventional (I-V) characteristics of Al /CuO/p-Si /Al diode structure and series resistance values (Rs) were calculated by using Norde functions. Scanning electron microscope (SEM) images of that films were obtained. Furtheremore, the optical properties of CuO films were analyzed with UV-VIS spectroscopy, and then the optical energy band gap was determined as 2.08 eV. The calculations suggest that the produced diode was a rectifier diode with photodiodes feature.

Özet

Bu çalışmada, Metal-yarıiletken arasına yerleştirilen ince metal-oksit (CuO) filmin diyot karakteristikleri üzerine etkisi araştırıldı. Metal yarıiletken arasına yerleştirilen CuO nano yapılı ince filmleri büyütmek için spin coating metodu kullanıldı ve bir Al/CuO/p-Si/Al diyot yapısı üretildi. Üretilen Al/CuO/p-Si/Al diyot yapısının geleneksel (I-V) karakteristiklerinden, idealite faktörü (n), engel yüksekliği (ΦB0) ve Norde fonksiyonları kullanılarak seri direnç (Rs) değerleri hesaplandı. Elde edilen filmlerin, taramalı elektron mikroskobu (SEM) görüntüleri alındı. Ayrıca CuO filmlerin optiksel özellikleri UV-VIS spektroskopisi ile incelenmiş ve buradan optiksel enerji bant aralığının 2.08 eV olduğu belirlendi. Hesaplamalara göre, üretilen diyotun doğrultucu diyot olduğu ve fotodiyot özellik gösterdiği görüldü.

🔖

Cite This Article

Karabat, M. F., Arsel, İ. (2015). Electrical Characterization Of Al/CuO/p-Si/Al MIS Photovoltaic Cells. Batman Üniversitesi Yaşam Bilimleri Dergisi, Cilt: 5 Sayı: 1, 40–53. https://ajindex.com/articles/1461417

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...