Journals / Atatürk Araştırma Merkezi Dergisi / 2017 / Cilt: 33 - Sayı: 96

THE MOST IMPORTANT HEAVY INDUSTRY ATTEMPT OF THE REPUBLICAN PERIOD: KARABUK IRON AND STEEL FACTORY (1939-1960)

CUMHURİYET DÖNEMİNİN EN ÖNEMLİ AĞIR SANAYİ HAMLESİ: KARABÜK DEMİR VE ÇELİK FABRİKASI(1939-1960)

Pages
155–204
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As all the units were put into service, an increase occurred in iron and steel production of Turkey, thereby contributing to the development of other sectors and thus supporting the national economy

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study deals with the activities carried out by the Republican People’s Party and Democratic Party (DP) governments on the way to the establishment of Karabuk Iron and Steel Plant from the early years of the Republic until the 1960s and the contributions of these activities to Turkish economy.
📊
Key Findings & Data:The results obtained in the study can be summarized as follows: With the efforts of the Republican People’s Party governments, attempts made for heavy industrialization in Turkey came to fruition and Karabuk Iron and Steel Factory was established with the first kiln fired on 9 September 1939.
💡
Conclusion & Impact:As all the units were put into service, an increase occurred in iron and steel production of Turkey, thereby contributing to the development of other sectors and thus supporting the national economy
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study deals with the activities carried out by the Republican People’s Party and Democratic Party (DP) governments on the way to the establishment of Karabuk Iron and Steel Plant from the early years of the Republic until the 1960s and the contributions of these activities to Turkish economy. The subject is covered in three chapters under the titles of establishment works of Karabuk Iron and Steel Plant ; production activities of Karabuk Iron and Steel Plant during the Republican People’s Party period ; and production works of Karabuk Iron and Steel Factory during the Democratic Party period . The production activities of Karabuk Iron and Steel Plant and the contributions of these activities to the economy were evaluated based on numerical data. The gaps in the literature on the research topic were filled through use of primary sources. The topic was handled through comparison of the developments taking place in the field of iron and steel in Turkey and in the world during the periods under examination. The results obtained in the study can be summarized as follows: With the efforts of the Republican People’s Party governments, attempts made for heavy industrialization in Turkey came to fruition and Karabuk Iron and Steel Factory was established with the first kiln fired on 9 September 1939. In the following periods, the integrated production units of the factory were completed, and extensions were made in the DP period. As all the units were put into service, an increase occurred in iron and steel production of Turkey, thereby contributing to the development of other sectors and thus supporting the national economy

Özet

Bu çalışmada Cumhuriyetin ilk yıllarından itibaren Karabük Demir ve Çelik Fabrikası'nın (KDÇF) tesisi yolunda Cumhuriyet Halk Partisi (CHP) ile Demokrat Parti (DP) Hükümetleri tarafından yapılan girişimler ve üretimin artırılmasına yönelik 1960 yılına kadar gerçekleştirilen icraatlar ve bu icraatların ekonomiye olan katkıları incelenmiştir. Konu, KDÇF'nin kuruluş çalışmaları ; CHP döneminde KDÇF'nin üretim faaliyetleri ; DP döneminde KDÇF'nin üretim çalışmaları adlı başlıkları altında üç bölümde ele alınmıştır. Karabük Demir ve Çelik Fabrikası'nın kuruluşu, üretim faaliyetleri ve bu faaliyetlerin ekonomiye olan katkıları incelenirken sayısal veriler üzerinde değerlendirmeler yapılmıştır. Araştırmanın konusu hakkında literatürde yer alan boşluklar birinci elden kaynakların kullanılması yoluyla doldurulmuştur. Konu incelenirken dönemin Türkiye'si ile Dünyanın demir çelik alanında yaşanan gelişmeleri göz önüne alınarak bu gelişme ışığında verilerin karşılaştırmalı olarak değerlendirilmesi yapılmıştır. Çalışmada elde edilen sonuç şudur: CHP Hükümetleri'nin gayretleriyle Türkiye'de ağır sanayi hamlesi yönünde yapılan girişimler semeresini vermiş ve 9 Eylül 1939 tarihinde ilk fırının ateşlenmesiyle KDÇF tesis edilmiştir. İleriki dönemlerde, fabrikanın entegre halinde üretim üniteleri tamamlanmış, DP döneminde ise ilaveler yapılmıştır. Bütün ünitelerin hizmete girmesi, Türkiye'de demir ve çelik üretiminin artmasına yol açtığı gibi, diğer sektörlerin gelişmesini de destekleyerek millî ekonomiye katkı sağlamıştır

🔖

Cite This Article

YURTOĞLU, N. (2017). THE MOST IMPORTANT HEAVY INDUSTRY ATTEMPT OF THE REPUBLICAN PERIOD: KARABUK IRON AND STEEL FACTORY (1939-1960). Atatürk Araştırma Merkezi Dergisi, Cilt: 33 - Sayı: 96, 155–204. https://ajindex.com/articles/143941

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. ADIGÜN, Cevat, “Sümerbank’ın Yeni Tesisleri”, Türk Ekonomisi, S 80, Yıl: 8, Şubat 1950, s.35-36.
  2. ALİSBAH, Hulki, “1947’ye Girerken Türkiye Sanayi”, İktisadi Yürüyüş, C 8, S 169, Yıl: 8, 1 Ocak 1947, s.6, 7, 22. ATAMER, Suha, “Demir Çeliği Tanıyalım, Sülfürik Asit ve Süper Fosfat Fabrikası”, Demir ve Çelik, S 16, Yıl: 2, 1 Eylül 1952, s.357-358.
  3. AYTEKİN, Veli, “Karabük Mamullerini Tanıyalım, Karabük Raylarının Evsafı ve İmalinin Kontrolü Hakkında Bir Etüd”, Demir ve Çelik, S 14, Yıl: 2, 1 Temmuz 1952, s.306-310. __________, “Memleketimizde ve Avrupa’da Demir Çelik Sanayinin Bugünkü ve Müstakbel Durumu”, Demir ve Çelik, S 11, Yıl: 3, Kasım 1953, s.239- 242. BEZER, Emin, “Demir Çeliği Tanıyalım, Boru Fabrikası”, Demir ve Çelik, S 10, Yıl: 1, 1 Mart 1951, s.219-221.
  4. BULUTOĞLU, Şadan, “Teknikte Kullanabileceğimiz Başlıca Soğutma Tesisleri”, Demir ve Çelik, S 10, Yıl: 1, 1 Mart 1952, s.203- 209. “Büyüklerimiz ve Madenciliğimiz”, Maden Tetkik ve Arama Enstitüsü Mecmuası, S 17, Yıl: 1939, s.3-4.
  5. DAVER, Abidin, “İktisat Sahasında Yapılan İşlerin En Mühimleri”, İktisadi Yürüyüş, C 2, S 22, Yıl: 1, 1 İkinciteşrin 1940, s.8. “Demir ve Çelik Sanayimiz”, Cumhuriyet, 2 Şubat 1949, Sayı No: 8792. “Ekonomi ve Ticaret Bakanlığı Faaliyeti”, Türk Ekonomisi, S 107, Yıl: 10, Mayıs 1952, s.131-136.
  6. ERGÜVENÇ, Fahrettin, “Demir ve Çelik Sanayiinde Son Yenilikler”, Demir ve Çelik, S 3, Yıl: 1, 1 Ağustos 1951, s.54-56. __________, “Demir Çeliği Tanıyalım, Kuvvet Santrali”, Demir ve Çelik, S 1, Yıl. 3, 1 Ocak 1953, s.447-449.
  7. ERKMENOL, Adnan; TARHAN, Orhan; MUCUOĞLU, Mahmut C., “Türkiye Demir ve Çelik Fabrikalarında İş Kıymetlendirme Çalışmaları”, Demir ve Çelik, S 15, Yıl: 2, 1 Ağustos 1952, s.317-323.
  8. GÜNERGUN, Burhan, “Son Seneler Zarfında Kok Sanayiinde Kaydedilen Yenilikler”, Demir ve Çelik, S 11, Yıl: 1, 1 Nisan 1952, s.225-228. __________, “Demir ve Çeliği Tanıyalım, Kok Fabrikası”, Demir ve Çelik, S 3, Yıl: 1, Ağustos 1951, s.57-59. __________, “Karabük İkinci Kok Fabrikası’nın İşletmeye Açılması”, Demir ve Çelik, S 15, Yıl: 2, 1 Ağustos 1952, s.323-324. __________, “Karabük Mamullerini Tanıyalım, Kok Fabrikası Mamullerinden Yol Katranı”, Demir ve Çelik, S 18, Yıl: 2, 1 Kasım 1952, s.400- 401 GRANİGG B., “Türkiye Demir Endüstrisi ve Hammaddeleri”, Maden Tetkik ve Arama Enstitüsü Mecmuası, S 4, Yıl: 1936, s.8 KAN, Ahmet, “Bakım Mevzuu Üzerinde Düşünceler”, Demir ve Çelik, S 6, Yıl: 1, Kasım 1951, s.127-130. “Karabük Fabrikaları, Türkiye Demir ve Çelik Fabrikaları Müessesesi H