Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2014 / Cilt: 2 Sayı: 3

-

BİR KALAMARIN 3-BOYUTLU SONLU ELEMANLAR MODELİNİN BİLGİSAYARLI TOMOGRAFİ YARDIMIYLA OLUŞTURULMASI

Pages
181–184
Publication Date
2014-12-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally the surface is enclosed in an sufficiently large prismatic box

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In order to have a computational fluid dynamics analysis of a swimming squid a numerical model is required.
📊
Key Findings & Data:The obtained computed tomography scans are used to identify the segments, which were rendered in 3D using modeling software to reconstruct the geometry afterwards.
💡
Conclusion & Impact:Finally the surface is enclosed in an sufficiently large prismatic box
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In order to have a computational fluid dynamics analysis of a swimming squid a numerical model is required. To overcome the difficulty of modeling anatomic structures a methodology is developed. Several squids are scanned using computed tomography. The obtained computed tomography scans are used to identify the segments, which were rendered in 3D using modeling software to reconstruct the geometry afterwards. For the flow analysis, only the outer surface of the squid is needed to model the boundaries. Using simplification algorithms the Stereolitographic surface mode of the squid is smoothed. Around the final surface an envelope is created to model the boundary effects. Finally the surface is enclosed in an sufficiently large prismatic box

Özet

Bir kalamarın yüzmesinin hesaplamalı akışkanlar dinamiği analizi için bir sayısal model gereklidir. Anatomik yapıların modellenmesindeki zorlukları aşmak için bir metodoloji geliştirildi. Birkaç kalamar bilgisayarlı tomografi ile tarandı. Elde edilen bilgisayarlı tomografi imajları ile ilgili bölgeler tespit edildi, ve üç boyutlu geometri oluşturmak üzere kullanıldı. Akış analizi için sınırları belirlenmesi için kalamarın dış yüzeyi yeterlidir. Stereolitografik yüzey basitleştirme algoritmaları ile yumuşatıldı. Elde edilen yüzeyin etrafı kapatılarak çözüm bölgesi elde edildi ve sınır şartları uygulandı.

🔖

Cite This Article

Gökçen, M. G., Olcay, A. (2014). -. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 2 Sayı: 3, 181–184. https://doi.org/10.1063/1.3276062),

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. ANSYS Inc, 2010. ANYS Release 13.0 ANYS
  2. Workbench Users Guide, SAS IP, 158s, Pensilvanya Cignoni, P., Callieri, M., Corsini, M., Dellepiane, M., Ganovelli, F., Ranzuglia, G., 2008. MeshLab: an Open
  3. Source Mesh Processing Tool, Eurographics Italian Chapter Conference, V. Scarano, R. De Chiara, and U. Erra (Editors), 2-4 Temmuz 2008, Salerno, İtalya, 129
  4. Olcay, A. B., 2010. Pottebaum, T. S. and Krueger, P. S.,
  5. Sensitivity of LCS identification to flow field resolution and random errors by Chaos, vol. 20, 017506, (DOI 10.1063/1.3276062),
  6. Robert McNeal & Associates, 2008. Rhinoceros
  7. NURBS modeling for Windows Versin 4.0 Users Guide, 113 s, A.B.D. Visualization Sciences Group, 2013. Amira User’s
  8. Guide, Visualization Sciences Group, 445s, Oregon.
  9. Source Mesh Processing Tool, Eurographics Italian Chapter Conference, V. Scarano, R. De Chiara, and U. Erra (Editors), 2-4 Temmuz 2008, Salerno, İtalya, 129