Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2017 / Cilt: 5 Sayı: 3

HEAT TREATMENT EFFECT ON SPHEROIDAL GRAPHITE, MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NI-RESIST DUCTILE CAST IRON

KOROZYANA DAYANIKLI NI ALAŞIMLI SÜNEK DÖKME DEMİRLERDE ISIL İŞLEMİN KÜRESEL GRAFİT, MİKROYAPI VE MEKANİK ÖZELLİKLERE ETKİSİ

Selçuk Yeşiltepe(İSTANBUL TEKNİK ÜNİVERSİTESİ)0000-0002-0982-3439
Mustafa Kelami Şeşen(İSTANBUL TEKNİK ÜNİVERSİTESİ)0000-0002-8113-6289
Pages
479–482
Publication Date
2017-12-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that carbon from graphite nodules are diffused in to ferritic matrix and formed pearlitic microstructure.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study high temperature behaviour of graphite nodules are investigated.
📊
Key Findings & Data:Prepared specimens are placed in furnace at set temperature, 900 and 1000 o C respectively.
💡
Conclusion & Impact:Results showed that carbon from graphite nodules are diffused in to ferritic matrix and formed pearlitic microstructure.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Küresel Grafitli Dökme Demir · Isıl İşlem · Sünek Dökme Demir

Abstract

In this study high temperature behaviour of graphite nodules are investigated. Spheroidal Ni-Resist cast iron is used for specimen preparation. Prepared specimens are placed in furnace at set temperature, 900 and 1000 o C respectively. Time parameters were 1, 2 and 4 hours. In order to investigate cooling rate, specimens treated with same temperature and annealing time cooled with different cooling speeds; air cool and water quench. Metallographic and hardness tests are conducted to measure the effect of heat treatment. Results showed that carbon from graphite nodules are diffused in to ferritic matrix and formed pearlitic microstructure. At 900 o C, air cooled specimens have less pearlite than water quenched specimens in microstructure. Reverse diffusion declined pearlite rate in microstructure. On the other hand 1000 o C specimens completely transformed pearlite for air cooled specimens, martensite for water quenched specimens. Diffusion rate and austenite carbon solution at 900 and 1000 o C effects graphite nodule behaviour.

Özet

Bu çalışmada grafit kürelerin yüksek sıcaklık davranışı incelenmiştir. Küresel Ni alaşımlı korozyona dayanıklı dökme demir numuneler ile çalışılmıştır. Hazırlanan numuneler 900 ve 1000 C sıcaklıklarda fırına yerleştirilmiştir. Zaman değişkeni 1, 2 ve 4 saat olarak belirlenmiştir. Soğuma hızının etkisinin ölçülebilmesi için aynı sıcaklık ve sürede ısıl işlem uygulanan numuneler su verme ve havada soğutma olmak üzere farklı soğutma hızları ile soğutulmuşlardır. I sıl işlemin etkilerini gözlemlemek için m etalografik ve sertlik ölçümleri uygulanmıştır. Sonuçlar küresel grafitten ferritik matrise karbon difüzyonu olduğunu ve perlitik mikroyapının oluştuğunu göstermiştir. 900 derecede havada soğutulan numuneler suda soğutulan numunelere oranla daha az perlit içermektedirler. Bu durum tersine difüzyon ile açıklanmıştır. Diğer taraftan 1000 derecede havada soğuyan numuneler tamamen perlitik mikroyapıya sahipken su verilen numuneler martensitik mikroyapıdadırlar. 1000 ve 900 derece grafit kürelerin davranışlarının difüzyon oranı ve östenit - karbon çözünürlüğü olduğu görülmüştür.

🔖

Cite This Article

Yeşiltepe, S., Şeşen, M. K. (2017). HEAT TREATMENT EFFECT ON SPHEROIDAL GRAPHITE, MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NI-RESIST DUCTILE CAST IRON. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 5 Sayı: 3, 479–482. https://ajindex.com/articles/1430748

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Monchoux, J.P., Verdu, C., Fougeres, R., Effect of a ferritization heat treatment on the fracture toughness of ferritic spheroidal graphite cast iron, Scripta Materiala, 42, 1047 – 1052, 2000.
  2. Hafız, M., Mechanical properties of SG-iron subjected to variable and isothermal austempering temperatures heat treatment, Materials Science & Engineering A, A340, 1 – 7, 2003.
  3. Novikov, I. I., Metallerin Isıl İşlem Teorisi, Nobel, 2012, (Tr. Said, G.).
  4. Monchoux, J.P., Verdu, C., Thollet, G., Fougeres, R., Reynaud, A., Morphological changes of graphite spheroids during heat treatment of ductile cast irons, Acta Materiala, 49, 1355 – 4362, 2001.
  5. Properties and Applications of Ni-Resist and Ductile Ni-Resist Alloys, Nickel Institute, URL, date accessed (09.09.2016).
  6. Properties and Applications of Ni-Resist and Ductile Ni-Resist Alloys, Nickel Institute, URL, date accessed (09.09.2016).