SavedAdd your journal

Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2026 / Cilt: 8 Sayı: 2

ESTIMATION OF THE FRICTION PARAMETERS OF LINEAR PNEUMATIC CYLINDERS

DOĞRUSAL PNÖMATİK SİLİNDİRLERİN SÜRTÜNME PARAMETRELERİNİN TAHMİNİ

Mustafa Dağdelen(ÇUKUROVA ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ PR.)0000-0002-1448-104X
Mehmet İlteriş Sarıgeçili(ÇUKUROVA ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ PR.)0000-0002-9969-2005
Pages
397–406
Publication Date
2020-06-25
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Two different pneumatic cylinders have been examined with the proposed method and it has been seen that the results sound promising to use in later control applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays, pneumatic actuation systems are utilized in many applications due to their outstanding advantages.
📊
Key Findings & Data:They should be estimated accurately by experimental methods.
💡
Conclusion & Impact:Two different pneumatic cylinders have been examined with the proposed method and it has been seen that the results sound promising to use in later control applications.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Pnömatik Silindir · Sürtünme Kuvveti · Deneysel Yöntem

Abstract

Nowadays, pneumatic actuation systems are utilized in many applications due to their outstanding advantages. However, the pneumatics possess nonlinear characteristics that complicate precise motion control. To extend the use of pneumatic actuators to different precise applications their non-linearity should be evaluated and compensated. This is only possible by correctly estimating the non-linear parameters that exist in pneumatic systems. The friction forces in pneumatic cylinders is one of the main nonlinear parameters. These parameters cannot be defined directly or listed precisely for any produced particular cylinder in manufacturer’s catalog. They should be estimated accurately by experimental methods. This paper presents a new, simple and cheap experimental method for identification of friction force parameters for standard linear double acting pneumatic cylinders. Two different pneumatic cylinders have been examined with the proposed method and it has been seen that the results sound promising to use in later control applications.

Özet

Günümüzde pnömatik aktüatör sistemleri öne çıkan avantajlarından dolayı birçok uygulamada tercih edilmektedirler. Fakat bu sistemler hassas hareket kontrolünü zorlaştıran lineer olmayan karakteristikler barındırırlar. Pnömatik aktüatörlerin kullanımlarını farklı hassas uygulamalara da genişletebilmek için, doğrusal olmayan özelliklerinin belirlenip telafi edilmesi gerekir. Bunun tek yolu pnömatik sistemlerde mevcut olan doğrusal olmayan parametrelerin doğru bir şekilde tahmin edilmesidir. Pnömatik silindirlerdeki sürtünme kuvvetleri esas doğrusal olmayan parametrelerdir. Bu parametreler direkt olarak belirlenemezler ve üretici kataloglarında üretilen herhangi bir belirli silindir için hassas bir şekilde belirtilmezler. Bu parametrelerin deneysel yollarla hassas bir şekilde belirlenmesi gerekmektedir. Bu çalışma, standart, düz çift etkili pnömatik silindirlerin sürtünme kuvveti parametrelerinin saptanması için yeni, basit ve ucuz bir deneysel yöntem sunmaktadır. Önerilen yöntemle iki farklı pnömatik silindir incelenmiş ve sonuçların daha sonraki kontrol uygulamalarında kullanılması umut verici olduğu görülmüştür.

🔖

Cite This Article

Dağdelen, M., Sarıgeçili, M. İ. (2020). ESTIMATION OF THE FRICTION PARAMETERS OF LINEAR PNEUMATIC CYLINDERS. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 8 Sayı: 2, 397–406. https://doi.org/10.21923/jesd.569339

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Al-Bender, F., Lampaert, V., & Swevers, J., 2005. The generalized Maxwell-slip model: A novel model for friction simulation and compensation. IEEE Transactions on Automatic Control, 50(11), 1883–1887. https://doi.org/10.1109/TAC.2005.858676
  2. Andrighetto, P. L., Valdiero, A. C., & Carlotto, L., 2006. Study of the friction behavior in industrial pneumatic actuators. ABCM Symposium Series in Mechatronics, 2(2005), 369–376
  3. Belforte,G.,D’Alfio,N.,Raparelli,T., 1989. Experimental Analysis of Friction Forces in Pneumatic Cylinders. The Journal of Fluid Control, Vol.20, 42-60
  4. Chang, H., Lan, C. W., Chen, C. H., Tsung, T. T., & Guo, J. Bin., 2012. Measurement of frictional force characteristics of pneumatic cylinders under dry and lubricated conditions. Przeglad Elektrotechniczny, 88(7 B), 261–264
  5. Dağdelen, M., & Sarıgeçili, M. İ., 2017. Development of a Conceptual Model for Wrist/Forearm Rehabilitation Robot with Two Degrees of Freedom. Advances in Robot Design and Intelligent Control, 523–530. https://doi.org/10.1007/978-3-319-49058-8
  6. DAHL, P. R., 1968. [19]-English: A Solid Friction Model (modèle Dahl). Technical Report, The Aerospace Corporation, El Segundo, 158
  7. De Wit, C. C., Olsson, H., Astrom, K. J., & Lischinsky, P., 1995. A New Model of Control Systems with Friction. IEEE Transactions On Automatic Control, 40(3), 419–425
  8. Dupont, P., Armstrong, B., & Hayward, V., 2000. Elasto-plastic friction model: Contact compliance and stiction. Proceedings of the American Control Conference, 2(June), 1072–1077. https://doi.org/10.1109/acc.2000.876665
  9. Földi, L., Beres, Z.,Sarközi,E., 2011. Novel Cylinder Positioning System Realized by Using Solenoid Valves. Sustainable Construction and Design, 142-151
  10. Guenther, R., Perondi, E. C., Depieri, E. R., & Valdiero, A. C., 2006. Cascade controlled pneumatic positioning system with LuGre model based friction compensation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 28(1), 48–57. https://doi.org/10.1590/S1678-58782006000100006
  11. Harris, P. G., O’Donnell, G. E., & Whelan, T., 2012. Modelling and identification of industrial pneumatic drive system. International Journal of Advanced Manufacturing Technology, 58(9–12), 1075–1086. https://doi.org/10.1007/s00170-011-3447-7
  12. Hejrati, B., & Najafi, F., 2013. Accurate pressure control of a pneumatic actuator with a novel pulse width modulation-sliding mode controller using a fast switching On/Off valve. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 227(2), 230–242. https://doi.org/10.1177/0959651812459303
  13. Karnopp, D., 1985. Computer Simulation of Stick-Slip Friction in Mechanical Dynamic Systems. ASME J. Dyn. Sys., Meas., Control 107(March 1985), 100–103
  14. Korucu, S., Samtaş, G., & Soy, G., 2015. Design and Experimental Investigation of Pneumatic Movement Mechanism Supported by Mechanic Cam and Crank Shaft. TEM Journal, 4(1), 22–34
  15. Kosari, H., & Moosavian, S. A. A., 2015. Friction compensation in a pneumatic actuator using recursive least square algorithm. 2015 Australian Control Conference, AUCC 2015, 81–86
  16. Lafmejani, A. S., Masouleh, M. T., & Kalhor, A., 2016. An experimental study on friction identification of a pneumatic actuator and dynamic modeling of a proportional valve. 4th RSI International Conference on Robotics and Mechatronics, ICRoM 2016, 166–172. https://doi.org/10.1109/ICRoM.2016.7886840
  17. Liu, Y. F., Li, J., Zhang, Z. M., Hu, X. H., & Zhang, W. J., 2015. Experimental comparison of five friction models on the same test-bed of the micro stick-slip motion system. Mechanical Sciences, 6(1), 15–28. https://doi.org/10.5194/ms-6-15-2015
  18. Ritcher,R.R.M, Zamberian, C.V., Valdiero,A.C.& Rasia, L.A., 2014. Friction dynamics mathematical modelling in special pneumatic cylinder. ABCM Symposium Series in Mechatronics, vol.6, 800-808
  19. Saha, A., Wahi, P., Wiercigroch, M., & Stefański, A., 2016. A modified LuGre friction model for an accurate prediction of friction force in the pure sliding regime. International Journal of Non-Linear Mechanics, 80, 122–131. https://doi.org/10.1016/j.ijnonlinmec.2015.08.013
  20. Saleem, A., Wong, C. B., Pu, J., & Moore, P. R., 2009. Mixed-reality environment for frictional parameters identification in servo-pneumatic system. Simulation Modelling Practice and Theory, 17(10), 1575–1586. https://doi.org/10.1016/j.simpat.2009.06.016
  21. Swevers, J., Al-Bender, F., Ganseman, C. G., & Prajogo, T., 2000. An integrated friction model structure with improved presliding behavior for accurate friction compensation. IEEE Transactions on Automatic Control, 45(4), 675–686. https://doi.org/10.1109/9.847103
  22. Tran, X. B., & Yanada, H., 2013. Dynamic Friction Behaviors of Pneumatic Cylinders. Intelligent Control and Automation, 04(02), 180–190. https://doi.org/10.4236/ica.2013.42022
  23. Wang, J., Wang, J. D., Daw, N., Wu, Q. H., & Member, S., 2004. Identification of Pneumatic Cylinder Friction Parameters Using Genetic Algorithms. IEEE/ASME Transactions on Mechatronics, 9(1), 100–107
  24. Ritcher,R.R.M, Zamberian, C.V., Valdiero,A.C.& Rasia, L.A., 2014. Friction dynamics mathematical modelling in special pneumatic cylinder. ABCM Symposium Series in Mechatronics, vol.6, 800-808