SavedAdd your journal

Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2024 / Cilt: 12 Sayı: 4

COMPARISON OF SOME DURABILITY PROPERTIES OF GEOPOLYMER MORTARS PRODUCED WITH DIFFERENT CURING METHODS WITH CEMENT MORTARS

FARKLI KÜR YÖNTEMLERİYLE ÜRETİLEN GEOPOLİMER HARÇLARIN BAZI DURABİLİTE ÖZELLİKLERİNİN ÇİMENTO HARÇLARIYLA KIYASLANMASI

Adil Gültekin(DÜZCE ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, İNŞAAT MÜHENDİSLİĞİ BÖLÜMÜ)0000-0002-5267-5312
Kambiz Ramyar(EGE ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, İNŞAAT MÜHENDİSLİĞİ BÖLÜMÜ)0000-0003-2200-2691
Pages
821–834
Publication Date
2024-12-25
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results indicated that geopolymer mortars exhibit no expansion due to alkali-silica reaction, while their abrasion resistance was comparable to that of the cement mortars.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, some durability properties of microwave-cured fly ash-, pumice-, perlite-, and burnt clay-based geopolymer mortars were investigated comparatively with those of the conventional oven-cured geopolymer mortars.
📊
Key Findings & Data:The sorptivity test and scanning electron microscope examinations revealed that the type of aluminosilicate and curing method influence the capillary water absorption rate.
💡
Conclusion & Impact:Results indicated that geopolymer mortars exhibit no expansion due to alkali-silica reaction, while their abrasion resistance was comparable to that of the cement mortars.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Geopolimer Harç · Mikrodalga Kürü · Alkali-silis Reaksiyonu

Abstract

In this study, some durability properties of microwave-cured fly ash-, pumice-, perlite-, and burnt clay-based geopolymer mortars were investigated comparatively with those of the conventional oven-cured geopolymer mortars. In this context, alkali-silica reaction, sorptivity and abrasion resistance tests were carried out, and the microstructures of the pastes were examined using scanning electron microscope to investigate the relationship between durability and microstructure. In order to compare the durability properties of geopolymer mortars, portland cement mortars with similar compressive strength were produced. Results indicated that geopolymer mortars exhibit no expansion due to alkali-silica reaction, while their abrasion resistance was comparable to that of the cement mortars. The sorptivity test and scanning electron microscope examinations revealed that the type of aluminosilicate and curing method influence the capillary water absorption rate. Pumice-, perlite-, and burnt clay-based geopolymer mortars demonstrated rapid water sorptivity. The fact was attributed to the presence of considerable amount of pores in the microstructure, as provided by electron microscope images.

Özet

Bu çalışmada, mikrodalga kürü ile üretilen uçucu kül, pomza, perlit ve pişirilmiş kil esaslı geopolimer harçların bazı durabilite özellikleri incelenmiş ve elde edilen sonuçlar geleneksel etüv kürü ile üretilen serilerle kıyaslanmıştır. Bu kapsamda alkali-silis reaksiyonu direnci, kılcal su emme hızı, aşınma direnci deneyleri yapılmış, ayrıca hamur mikro yapıları taramalı elektron mikroskobu ile incelenerek durabilite-içyapı ilişkisi irdelenmiştir. Geopolimer harçların durabilite özelliklerinin karşılaştırılması amacıyla, incelenen harca benzer basınç dayanımına sahip portland çimentolu harçlar üretilmiş ve iki sistemin durabilite konusundaki avantaj ve dezavantajları araştırılmıştır. Geopolimer harçlarda alkali-silis reaksiyonundan kaynaklanan bir genleşme yaşanmadığı ve geopolimer harçların aşınma dirençlerinin, çimento harçları ile kıyaslanabilecek seviyelerde olduğu tespit edilmiştir. Kılcallık deneyi ve taramalı elektron mikroskobu incelemelerinde elde edilen bulgular, alüminosilikat tipi ve kür yönteminin kılcal su emme hızı üzerinde etkili olduğunu; pomza, perlit ve pişirilmiş kil esaslı geopolimer harçların kılcal yolla hızlı bir şekilde su emebildiklerini, bunun da boşluklu mikro yapıdan kaynaklandığını göstermiştir.

🔖

Cite This Article

Gültekin, A., Ramyar, K. (2024). COMPARISON OF SOME DURABILITY PROPERTIES OF GEOPOLYMER MORTARS PRODUCED WITH DIFFERENT CURING METHODS WITH CEMENT MORTARS. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 12 Sayı: 4, 821–834. https://doi.org/10.21923/jesd.1473561

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (30)

  1. Acar, M.C., Şener, A., Özbayrak, A., Çelik, A.İ, 2020. Geopolimer Harçlarda Zeolit Katkısının Etkisi, Mühendislik Bilimleri ve Tasarım Dergisi 8(3), 820-832. https://doi.org/10.21923/jesd.768565
  2. Adam, A.A., Molyneaux, T.C.K., Patnaikuni, I., Law, D.W., 2009. Strength, Sorptivity and Carbonation in Blended OPC-GGBS, Alkali Activated Slag, and Fly Ash Based Geopolymer Concrete, Challenges, Opportunities and Solutions in Structural Engineering and Construction 563-568.
  3. Al-Azzawi, Z.H.N., 2019, Investigation of Durability Properties of Geopolymer Containing Metakaolin, Ph. D. Thesis, Erciyes University Graduate School of Natural and Applied Science, 141p.
  4. Amin, M., Elsakhawy, Y., Abu El-Hassan, K., Abdelsalam, B.A., 2022. Behavior Evaluation of Sustainable High Strength Geopolymer Concrete Based on Fly Ash, Metakaolin, and Slag. Case Studies in Construction Materials 16, e00976. https://doi.org/10.1016/j.cscm.2022.e00976
  5. Aschoff, J., Partschefeld, S., Schneider, J., Osburg, A., 2024. Effect of Microwaves on the Rapid Curing of Metakaolin- and Aluminum Orthophosphate-Based Geopolymers. Materials 17, 463. https://doi.org/10.3390/ma17020463
  6. Badkul, A., Paswan, R., Singh, S.K., Tegar, J.P., 2021. A Comprehensive Study on the Performance of Alkali Activated Fly Ash/GGBFS Geopolymer Concrete Pavement. Road Materials and Pavement Design 23, 1815–1835. https://doi.org/10.1080/14680629.2021.1926311
  7. Diksha, Dev, N., Goyal, P.K., 2023. Prediction of Compressive Strength of Alccofine-Based Geopolymer Concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering. https://doi.org/10.1007/s40996-023-01308-2
  8. Ekiz Barış, K., 2024. Doğal Puzolan-esaslı Jeopolimer Üretiminde Mikrodalga Kürünün Rolü, Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 39(4), 2239-2251. https://doi.org/10.17341/gazimmfd.1267017
  9. Gultekin, A., Ramyar, K., 2022. Effect of Curing Type on Microstructure and Compressive Strength of Geopolymer Mortars. Ceramics International, 48, 16156–16172. https://doi.org/10.1016/j.ceramint.2022.02.163
  10. Gultekin, A., 2024. Compressive Strength and Microstructure of Microwave-Cured Waste Brick Powder-Based Geopolymer Mortars, Iranian Journal of Science and Technology, Transactions of Civil Engineering 48, 3119–3133. https://doi.org/10.1007/s40996-023-01330-4
  11. Hossain, M.M., Karim, M.R., A Elahi, M.M., Mohd Zain, M.F., 2020. Water Absorption and Sorptivity of Alkali-Activated Ternary Blended Composite Binder. Journal of Building Engineering 31, 101370. https://doi.org/10.1016/j.jobe.2020.101370
  12. Jacob, A., Ephraim, E.K., Muhammad, M., 2020. Properties of Metakaolin Based Geopolymer Concrete Made with Recycled Concrete Aggregate. International Journal of Research and Innovation in Applied Science, 5, 10, 57-63
  13. Kanagaraj, B., Anand, N., Samuvel Raj, R., Lubloy, E., 2023. Techno-Socio-Economic Aspects of Portland Cement, Geopolymer, and Limestone Calcined Clay Cement (LC3) Composite Systems: A-State-Of-Art-Review. Construction and Building Materials 398, 132484. https://doi.org/10.1016/j.conbuildmat.2023.132484
  14. Khalid, S.M., Shobha, M.S., 2024. Effect of Ternary Blends on Mechanical Strength, Durability and Microstructural Properties of Geopolymer Concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering. https://doi.org/10.1007/s40996-023-01241-4
  15. Lei, J., Fu, J., Yang, E.-H., 2020. Alkali-Silica Reaction Resistance and Pore Solution Composition of Low-Calcium Fly Ash-Based Geopolymer Concrete. Infrastructures 5, 96. https://doi.org/10.3390/infrastructures5110096
  16. Li, K.L., Huang, G.H., Jiang, L.H., Cai, Y.B., Chen, J., Ding, J.T., 2006. Study on Abilities of Mineral Admixtures and Geopolymer to Restrain ASR. Key Engineering Materials 302–303, 248–254. https://doi.org/10.4028/www.scientific.net/KEM.302-303.248
  17. Luhar, S., Luhar, I., Nicolaides, D., Gupta, R., 2021. Durability Performance Evaluation of Rubberized Geopolymer Concrete. Sustainability 13, 5969. https://doi.org/10.3390/su13115969
  18. Nadeem, M., Haq, E.U., Ahmed, F., Rafiq, M.S., Awan, G.H., Zain-ul-Abdein, M., 2020. Effect of Microwave Curing on the Construction Properties of Natural Soil Based Geopolymer Foam, Construction and Building Materials 230, 117074. https://doi.org/10.1016/j.conbuildmat.2019.117074
  19. Ng, C., Alengaram, U.J., Wong, L.S., Mo, K.H., Jumaat, M.Z., Ramesh, S., 2018. A Review on Microstructural Study and Compressive Strength of Geopolymer Mortar, Paste and Concrete. Construction and Building Materials 186, 550–576. https://doi.org/10.1016/j.conbuildmat.2018.07.075
  20. Nurruddin, M.F., Haruna, S., Mohammed, B.S., Shaaban, I.G., 2018. Methods of Curing Geopolymer Concrete: A Review. International Journal of Advanced and Applied Sciences. 5, 31–36. https://doi.org/10.21833/ijaas.2018.01.005
  21. Pouhet, R., Cyr, M., Multon, S., 2016. Can Metakaolin-Based Geopolymers Suffer from Alkali–Silica Reaction. 5th International Conference on Alkali-Aggregate Reaction, Sao Paulo, Brazil.
  22. Pradhan, P., Dwibedy, S., Pradhan, M., Panda, S., Panigrahi, S.K., 2022. Durability Characteristics of Geopolymer Concrete - Progress and Perspectives. Journal of Building Engineering 59, 105100. https://doi.org/10.1016/j.jobe.2022.105100
  23. Shaikh, F.U.A., 2014. Effects of Alkali Solutions on Corrosion Durability of Geopolymer Concrete. Advances in Concrete Construction, 2, 109–123. https://doi.org/10.12989/ACC.2014.2.2.109
  24. Shi, C., Shi, Z., Hu, X., Zhao, R., Chong, L., 2015. A Review on Alkali-Aggregate Reactions in Alkali-Activated Mortars/Concretes Made With Alkali-Reactive Aggregates. Materials and Structures 48, 621–628. https://doi.org/10.1617/s11527-014-0505-2
  25. Shi, S., Li, H., Fabian, M., Sun, T., Grattan, K.T.V., Xu, D., Basheer, P.A.M., Bai, Y., 2016. Alkali-Activated Fly Ash Manufactured with Multi-stage Microwave Curing, Fourth International Conference on Sustainable Construction Materials and Technologies, Las Vegas, USA.
  26. Somaratna, J., Ravikumar, D., Neithalath, N., 2010. Response of alkali activated fly ash mortars to microwave curing, Cement and Concrete Research 40, 1688–1696. https://doi.org/10.1016/j.cemconres.2010.08.010
  27. Thompson, A., Saha, A.K., Sarker, P.K., 2019. Comparison of the Alkali-Silica Reactions of Ferronickel Slag Aggregate in Fly Ash Geopolymer and Cement Mortars. European Journal of Environmental and Civil Engineering 26, 891–904. https://doi.org/10.1080/19648189.2019.1686068
  28. Yang, K., Yang, C., Magee, B., Nanukuttan, S., Ye, J., 2016. Establishment of a Preconditioning Regime for Air Permeability and Sorptivity of Alkali-Activated Slag Concrete. Cement and Concrete Composites 73, 19–28. https://doi.org/10.1016/j.cemconcomp.2016.06.019
  29. Zhang, B., 2024. Durability of Low-carbon Geopolymer Concrete: A Critical Review. Sustainable Materials and Technologies 40, e00882. https://doi.org/10.1016/j.susmat.2024.e00882
  30. Zhao, R., Sanjayan, J.G., 2011. Geopolymer and Portland Cement Concretes in Simulated Fire. Magazine of Concrete Research 63, 163–173. https://doi.org/10.1680/macr.9.00110