SavedAdd your journal

Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2024 / Cilt: 12 Sayı: 4

EFFECTS OF ASYMMETRICAL STATOR STRUCTURE ON BLDC MOTOR PERFORMANCE FOR HOUSEHOLD APPLIANCES

EV ALETLERİ İÇİN ASİMETRİK STATOR YAPISININ BLDC MOTOR PERFORMANSINA ETKİLERİ

Emin Tarik Kartal(YILDIZ TEKNİK ÜNİVERSİTESİ, ELEKTRİK-ELEKTRONİK FAKÜLTESİ, ELEKTRİK MÜHENDİSLİĞİ BÖLÜMÜ)0000-0002-4966-7258
Fatma Keskin Arabul(YILDIZ TEKNİK ÜNİVERSİTESİ, ELEKTRİK-ELEKTRONİK FAKÜLTESİ, ELEKTRİK MÜHENDİSLİĞİ BÖLÜMÜ)0000-0002-9573-8440
Pages
663–675
Publication Date
2024-12-25
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the analysis results, air gap flux density, torque, torque ripple and cogging torque are examined, and the flux density and torque spectrum obtained by Fast Fourier Transform (FFT) are presented comparatively

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Brushless direct current motors (BLDCM) have been frequently preferred in the industry, especially in home appliances, due to their advantages such as long life, high efficiency, low maintenance costs and ease of control.
📊
Key Findings & Data:In this study, alternative asymmetric designs are realized in the stator tooth structure of the BLDCM designed for home appliances, and comparative analyses of the effects of the non-uniform air gap caused by the asymmetric tooth structure on the motor performance are presented.
💡
Conclusion & Impact:In the analysis results, air gap flux density, torque, torque ripple and cogging torque are examined, and the flux density and torque spectrum obtained by Fast Fourier Transform (FFT) are presented comparatively
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Elektrik Makinaları · Fırçasız DC Motor · Vuruntu Momenti

Abstract

Brushless direct current motors (BLDCM) have been frequently preferred in the industry, especially in home appliances, due to their advantages such as long life, high efficiency, low maintenance costs and ease of control. In addition to these advantages, the main disadvantages of these motors are known to be high torque ripple and vibration levels. In this study, alternative asymmetric designs are realized in the stator tooth structure of the BLDCM designed for home appliances, and comparative analyses of the effects of the non-uniform air gap caused by the asymmetric tooth structure on the motor performance are presented. Two different asymmetric structures, namely the model with clockwise asymmetric design (CW) and the model with counterclockwise asymmetric design (CCW) in the stator tooth structure, are determined in the stator design. With these alternative designs, improvements are made in terms of torque ripple and cogging torque when compared with the reference motor; notably, the CCW-2 model achieves the lowest ripple at 19.4% compared to 23.1% for the reference motor, and a 42% reduction in cogging torque. The design of the motor models is made in ANSYS EDT program as two dimensional (2D) and analyzed with the Finite Element Method (FEM). In the analysis results, air gap flux density, torque, torque ripple and cogging torque are examined, and the flux density and torque spectrum obtained by Fast Fourier Transform (FFT) are presented comparatively

Özet

Fırçasız doğru akım motorları uzun ömür, yüksek verim, düşük bakım maliyetleri ve kontrol kolaylığı gibi avantajları nedeniyle endüstride özellikle ev aletlerinde sıklıkla tercih edilmektedirler. Bu avantajlarının yanı sıra, moment dalgalanması ve titreşim seviyelerinin yüksek olması bu motorların başlıca dezavantajları olarak bilinmektedir. Bu çalışmada, ev aletleri için tasarlanan fırçasız doğru akım motorun stator diş yapısında alternatif asimetrik tasarımlar gerçekleştirilmiş ve asimetrik diş yapısının neden olduğu düzgün olmayan hava aralığının motor performansı üzerindeki etkilerinin karşılaştırmalı analizleri sunulmuştur. Stator diş yapısında saat yönünde asimetrik tasarıma sahip model (CW) ve saat yönünün tersine asimetrik tasarıma sahip model (CCW) olmak üzere iki farklı asimetrik yapı stator tasarımında belirlenmiştir. Bu alternatif tasarımlarla, referans motorla karşılaştırıldığında moment dalgalanması ve vuruntu momenti açısından iyileştirmeler yapılmaktadır; özellikle CCW-2 modeli, referans motor için %23,1'e kıyasla %19,4 ile en düşük dalgalanmayı ve vuruntu momentinde %42'lik bir azalma elde etmektedir. Motor modellerinin tasarımı ANSYS EDT programında iki boyutlu olarak yapılmış ve Sonlu Elemanlar Yöntemi ile analiz edilmiştir. Analiz sonuçlarında hava aralığı akı yoğunluğu, moment, moment dalgalanması ve vuruntu momenti incelenmiş, Hızlı Fourier Dönüşümü ile elde edilen akı yoğunluğu ve moment spektrumu karşılaştırmalı olarak sunulmuştur.

🔖

Cite This Article

Kartal, E. T., Arabul, F. K. (2024). EFFECTS OF ASYMMETRICAL STATOR STRUCTURE ON BLDC MOTOR PERFORMANCE FOR HOUSEHOLD APPLIANCES. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 12 Sayı: 4, 663–675. https://doi.org/10.21923/jesd.1541595

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (25)

  1. Hendershot, J. R., & Miller, T. J. E. (2010). Design of Brushless Permanent- Magnet Machines. Motor Design Books LLC.
  2. Huang, X., Goodman, A., Gerada, C., Fang, Y., & Lu, Q. (2012). Design of a five-phase brushless DC motor for a safety critical aerospace application. IEEE Transactions on Industrial Electronics, 59(9), 3532–3541. https://doi.org/10.1109/TIE.2011.2172170
  3. Karan, V. K., Shekhar, S., Alam, A., & Thakur, A. (2024). Elimination of torque ripples by multiple slope ST-DTC vectors in PM-BLDC drive. Electrical Engineering, 106(3), 3393–3402. https://doi.org/10.1007/s00202-023-02155-0
  4. Khazaee, A., Zarchi, H. A., Markadeh, G. A., & Mosaddegh Hesar, H. (2021). MTPA Strategy for Direct Torque Control of Brushless DC Motor Drive. IEEE Transactions on Industrial Electronics, 68(8), 6692–6700. https://doi.org/10.1109/TIE.2020.3009576
  5. Kwack, J., Min, S., & Hong, J.-P. (2010). Optimal stator design of interior permanent magnet motor to reduce torque ripple using the level set method. IEEE Transactions on Magnetics, 46(6), 2108–2111. https://doi.org/10.1109/TMAG.2010.2044871
  6. Lee, S.-K., Kang, G.-H., Hur, J., & Kim, B.-W. (2012). Stator and rotor shape designs of interior permanent magnet type brushless DC motor for reducing torque fluctuation. IEEE Transactions on Magnetics, 48(11), 4662–4665. https://doi.org/10.1109/TMAG.2012.2201455
  7. Li, Z., Fan, X., Kong, Q., Liu, J., & Zhang, S. (2024). Torque Ripple Suppression of BLDCM With Optimal Duty Cycle and Switch State by FCS-MPC. IEEE Open Journal of Power Electronics, 5(February), 381–391. https://doi.org/10.1109/OJPEL.2024.3368221
  8. Lin, H., Wang, D., Liu, D., & Chen, J. (2014). Influence of magnet shape on torque behavior in surface-mounted permanent magnet motors. 2014 17th International Conference on Electrical Machines and Systems, ICEMS 2014, 44–47. https://doi.org/10.1109/ICEMS.2014.7013448
  9. Lipo, T. A. (2017). Intorduction to AC Machine Design. John Wiley & Sons Inc.
  10. Liu, Y., Zhu, Z. Q., & Howe, D. (2005). Direct torque control of brushless DC drives with reduced torque ripple. IEEE Transactions on Industry Applications, 41(2), 599–608. https://doi.org/10.1109/TIA.2005.844853
  11. Mohanraj, D., Aruldavid, R., Verma, R., Sathiyasekar, K., Barnawi, A. B., Chokkalingam, B., & Mihet-Popa, L. (2022). A Review of BLDC Motor: State of Art, Advanced Control Techniques, and Applications. IEEE Access, 10, 54833–54869. https://doi.org/10.1109/ACCESS.2022.3175011
  12. Mohanraj, D., Gopalakrishnan, J., Chokkalingam, B., & Mihet-Popa, L. (2022). Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review. IEEE Access, 10(July), 73635–73674. https://doi.org/10.1109/ACCESS.2022.3187515
  13. Park, J. H., & Lee, D. H. (2020). Simple Commutation Torque Ripple Reduction Using PWM with Compensation Voltage. IEEE Transactions on Industry Applications, 56(3), 2654–2662. https://doi.org/10.1109/TIA.2020.2968412
  14. Prabhu, N., Thirumalaivasan, R., & Ashok, B. (2023). Critical Review on Torque Ripple Sources and Mitigation Control Strategies of BLDC Motors in Electric Vehicle Applications. IEEE Access, 11(October), 115699–115739. https://doi.org/10.1109/ACCESS.2023.3324419
  15. Prakash, A., & Naveen, C. (2023). Combined strategy for tuning sensor-less brushless DC motor using SEPIC converter to reduce torque ripple. ISA Transactions, 133, 328–344. https://doi.org/10.1016/j.isatra.2022.06.045
  16. Rahman, M. M., Kim, K.-T., & Hur, J. (2014). Design and Optimization of Neodymium-Free SPOKE-Type Motor With Segmented Wing-Shaped PM. IEEE Transactions on Magnetics, 50(2), 865–868. https://doi.org/10.1109/tmag.2013.2282151
  17. Raja, M. S., & Geethalakshmi, B. (2018). Modified Rotor Material for Minimization of Torque Ripple for Interior Permanent Magnet BLDC motor. Materials Today: Proceedings, 5(2), 3639–3647. https://doi.org/10.1016/j.matpr.2017.11.614
  18. Rupam, Marwaha, S., & Marwaha, A. (2022). FEA Based Design of Outer Rotor BLDC Motor for Battery Electric Vehicle. International Journal of Electrical and Electronics Research, 10(4), 1130–1134. https://doi.org/10.37391/ijeer.100459
  19. Shi, T., Cao, Y., Jiang, G., Li, X., & Xia, C. (2017). A Torque Control Strategy for Torque Ripple Reduction of Brushless DC Motor with Nonideal Back Electromotive Force. IEEE Transactions on Industrial Electronics, 64(6), 4423–4433. https://doi.org/10.1109/TIE.2017.2674587
  20. Tezcan, M. M., & Yetgin, A. G. (2023). An Approach For Reducing Torque Ripples on Permanent Magnet Synchronous Motors: Slitted Stator Core. Gazi Journal of Engineering Sciences, 9(2), 163–173. https://doi.org/10.30855/gmbd.0705061
  21. Trivedi, M. S., & Keshri, R. K. (2020). Evaluation of Predictive Current Control Techniques for PM BLDC Motor in Stationary Plane. IEEE Access, 8, 46217–46228. https://doi.org/10.1109/ACCESS.2020.2978695
  22. Wang, L., Zhu, Z. Q., Bin, H., & Gong, L. (2021). A Commutation Error Compensation Strategy for High-Speed Brushless DC Drive Based on Adaline Filter. IEEE Transactions on Industrial Electronics, 68(5), 3728–3738. https://doi.org/10.1109/TIE.2020.2984445
  23. Xia, K., Ye, Y., Ni, J., Wang, Y., & Xu, P. (2020). Model predictive control method of torque ripple reduction for BLDC Motor. IEEE Transactions on Magnetics, 56(1), 1–6. https://doi.org/10.1109/TMAG.2019.2950953
  24. Yao, X., Zhao, J., Wang, J., Huang, S., & Jiang, Y. (2019). Commutation Torque Ripple Reduction for Brushless DC Motor Based on an Auxiliary Step-Up Circuit. IEEE Access, 7, 138721–138731. https://doi.org/10.1109/ACCESS.2019.2943411
  25. Tezcan, M. M., & Yetgin, A. G. (2023). An Approach For Reducing Torque Ripples on Permanent Magnet Synchronous Motors: Slitted Stator Core. Gazi Journal of Engineering Sciences, 9(2), 163–173. https://doi.org/10.30855/gmbd.0705061