Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2026 / Cilt: 14 Sayı: 3

IMPROVING WATER RESISTANCE OF MAGNESIUM OXYCHLORIDE CEMENT USING HYDROPHOBIC ADDITIVES

HİDROFOBİK KATKI MADDELERİ KULLANILARAK MAGNEZYUM OKSİKLORÜR ÇİMENTOSUNUN SU DİRENCİNİN ARTIRILMASI

Gamze Eröksüz Turan(ISPARTA UYGULAMALI BİLİMLER ÜNİVERSİTESİ)0000-0002-2274-0689
Metin Davraz(ISPARTA UYGULAMALI BİLİMLER ÜNİVERSİTESİ)0000-0002-6069-7802
Nuri Işıldar(SÜLEYMAN DEMİREL ÜNİVERSİTESİ)0000-0001-6639-3650
Pages
636–649
Publication Date
2026-09-25
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Overall, MOC systems produced with re-calcined MgO and 1% zinc stearate showed superior mechanical strength and water resistance.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, three water-repellent additives (silicon powder, calcium stearate, zinc stearate) were used to improve the water resistance of MOC, and their effects were examined through a three-stage experimental program.
📊
Key Findings & Data:In the first stage, the optimal ratios for phase-5 formation were determined as RA = 13.21 mol/mol and RB = 16.57 mol/mol.
💡
Conclusion & Impact:Overall, MOC systems produced with re-calcined MgO and 1% zinc stearate showed superior mechanical strength and water resistance.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Basınç Dayanımı · Kapiler Su Emme · Magnezyum Oksiklorür Çimentosu

Abstract

In this study, three water-repellent additives (silicon powder, calcium stearate, zinc stearate) were used to improve the water resistance of MOC, and their effects were examined through a three-stage experimental program. In the first stage, the optimal ratios for phase-5 formation were determined as RA = 13.21 mol/mol and RB = 16.57 mol/mol. Re-calcined MgO was then compared with original MgO, and re-calcined MgO showed higher performance with 11.77 MPa flexural strength and 70.6 MPa compressive strength. In the final stage, additives at 1%, 3%, and 5% were evaluated through capillary water absorption, 3–7–28-day water immersion, and softening coefficient tests. Results confirmed that RA = 13.21 and RB = 16.57 are optimal for phase-5 formation. In terms of impermeability, 1% zinc stearate provided the lowest capillary absorption (0.006 kg/m²·min⁰·⁵) and the highest softening coefficient (0.68). Overall, MOC systems produced with re-calcined MgO and 1% zinc stearate showed superior mechanical strength and water resistance.

Özet

Bu çalışmada, MOC’un su dayanımını geliştirmek için üç su itici katkı (toz silikon, kalsiyum stearat, çinko stearat) kullanılmış ve etkileri üç aşamalı deneysel yöntemle araştırılmıştır. İlk aşamada faz 5 oluşumu için RA = 13.21 mol/mol ve RB = 16.57 mol/mol oranları belirlenmiştir. Ardından rekalsine MgO ile orijinal MgO karşılaştırılmış; rekalsine MgO’nun 11.77 MPa eğilme ve 70.6 MPa basınç dayanımıyla daha yüksek performans sağladığı görülmüştür. Son aşamada katkılar %1, %3 ve %5 oranlarında değerlendirilmiş; kapiler su emme, 3–7–28 gün suya daldırma ve yumuşama katsayıları ölçülmüştür. Bulgular, faz 5 için en uygun oranların RA = 13.21 ve RB = 16.57 olduğunu göstermiştir. Su geçirimsizlikte %1 çinko stearat en düşük kapiler su emme (0.006 kg/m²·dak⁰·⁵) ve en yüksek yumuşama katsayısını (0.68) sağlamıştır. Sonuçlar, rekalsine MgO ve %1 çinko stearat katkılı MOC’un mekanik ve su dayanımı açısından en başarılı sistem olduğunu göstermektedir.

🔖

Cite This Article

Turan, G. E., Davraz, M., Işıldar, N. (2026). IMPROVING WATER RESISTANCE OF MAGNESIUM OXYCHLORIDE CEMENT USING HYDROPHOBIC ADDITIVES. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 14 Sayı: 3, 636–649. https://doi.org/10.21923/jesd.1846894

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (25)

  1. Abalı, Y. (2000). Magnezitin kalsinasyon kinetiği ve saf MgO üretimi. Selçuk Üniversitesi Fen-Edebiyat Fakültesi Fen Dergisi, 17, 159–164.
  2. An, L., Chang, C., Yan, F., & Peng, J. (2023). Study on the deterioration mechanism of magnesium oxychloride cement under an alkaline environment. Materials, 16(17), 5924. https://doi.org/10.3390/ma16175924
  3. Chen, X., Zhang, T., Bi, W., & Cheeseman, C. (2019). Effect of tartaric acid and phosphoric acid on the water resistance of magnesium oxychloride (moc) cement. Construction And Building Materials, 213, 528-536. https://doi.org/10.1016/j.conbuildmat.2019.04.086.
  4. Gong, W., Wang, N., Zhang, N., Han, W., & Qiao, H. (2020). Water resistance and a comprehensive evaluation model of magnesium oxychloride cement concrete based on taguchi and entropy weight method. Construction And Building Materials, 260, 119817. https://doi.org/10.1016/j.conbuildmat.2020.119817
  5. Guo, Y., Zhang, Y. X. ve Soe, K. (2022). Effect of sodium monofluorophosphate and phosphates on mechanical properties and water resistance of magnesium oxychloride cement. Cement and Concrete Composites, 129, 104472. https://doi.org/10.1016/j.cemconcomp.2022.104472
  6. Han, Y., Xu, Y., Ye, Q., Li, J., & Fang, Z. (2021). Marine sponge-inspired organic–inorganic double-network strategy to produce magnesium oxychloride cement with integrated water resistance and compressive strength. ACS Sustainable Chemistry & Engineering, 9(46), 15514–15524. https://doi.org/10.1021/acssuschemeng.1c05214
  7. Huang, S., Liu, W. ve Li, W. (2024). Study on water resistance of phosphogypsum solidified by magnesium oxychloride cement (MOC) and NaHCO3. Construction and Building Materials, 451, 138877
  8. Huang, Q., Wang, S., Du, Y., Yin, Z., Chen, B., Zhang, J., & Zheng, W. (2024). Effect of phosphoric acid and soluble phosphate on the properties of magnesium oxychloride cement. Materials, 17(19), 4828. https://doi.org/10.3390/ma17194828
  9. Huang, Q., Zheng, W., Dong, J., Wen, J., Chang, C. ve Xiao, X. (2022). Influences of different bischofite on the properties of magnesium oxychloride cement. Journal of Building Engineering, 57, 104923. https://doi.org/10.1016/j.jobe.2022.104923
  10. Huang, Q., Zheng, W., Li, Y., Chang, C., Wen, J., Dong, J. ve Xiao, X. (2022). The effect of doping high volume magnesium sulfate on properties of magnesium oxychloride cement. Crystals, 12(6), 857. https://doi.org/10.3390/cryst12060857
  11. Jin, F. (2020). Magnesium oxychloride cement. İçinde M. Shand, A. Al-Tabbaa, J. Qian, L. Mo ve F. Jin (Edlr.), Magnesia cements: From formulation to application (ss. 29–74). Elsevier. https://doi.org/10.1016/B978-0-12-391925-0.00009-1
  12. Kastiukas, G., Zhou, X., Neyazi, B., & Wan, K. T. (2019). Sustainable Calcination of Magnesium Hydroxide for Magnesium Oxychloride Cement Production. Journal of Materials in Civil Engineering, 31(7). https://doi.org/10.1061/(asce)mt.1943-5533.0002786
  13. Lauermannová, A.-M., Jankovský, O., Jiříčková, A., Sedmidubský, D., Záleská, M., Pivák, A., Pavlíková, M. ve Pavlík, Z. (2023). MOC composites for construction: Improvement in water resistance by addition of nanodopants and polyphenol. Polymers, 15(21), 4300. https://doi.org/10.3390/polym15214300
  14. Li, K., Wang, Y., Yao, N. ve Zhang, A. (2020). Recent progress of magnesium oxychloride cement: Manufacture, curing, structure and performance. Construction and Building Materials, 255, 119381. https://doi.org/10.1016/j.conbuildmat.2020.119381
  15. Türk Standardları Enstitüsü. (2016). Çimento deney metotları - Bölüm 1: Dayanım tayini (TS EN 196-1).
  16. Türk Standardları Enstitüsü. (2017). Çimento deney metotları - Bölüm 3: Priz süresi ve hacim genişliği tayini (TS EN 196-3).
  17. Türk Standardları Enstitüsü. (2020). Kargir harcı deney metotları - Bölüm 11: Sertleşmiş harcın eğilme ve basınç dayanımı tayini (TS EN 1015-11).
  18. Türk Standardları Enstitüsü. (2005). Kargir harcı deney metotları - Bölüm 18: Sertleşmiş harcın kılcal su emme katsayısının tayini (TS EN 1015-18).
  19. Yi, W.-J., Song, Z., Zhang, Y., Guo, M.-Z. ve Jiang, L. (2023). Effect of phytic acid on physiochemical properties of magnesium oxychloride cement as a biomaterial. Ceramics International. https://doi.org/10.1016/j.ceramint.2023.11.390
  20. Zhao, H., Ding, J., Huang, Y., Tang, Y., Xu, W., & Huang, D. (2019). Experimental analysis on the relationship between pore structure and capillary water absorption characteristics of cement-based materials. Structural Concrete, 20(5), 1750–1762. https://doi.org/10.1002/suco.201900184
  21. Zhang, H., Luo, A., & Sun, L. (2024). Mixture composition design of magnesium oxychloride cement-stabilized crushed stone materials applied as a pavement base. Scientific Reports, 14(1), 11656. https://doi.org/10.1038/s41598-024-62602-1
  22. Zhou, J. (2020). Properties of foam concrete prepared from magnesium oxychloride cement. Ceramics-Silikáty, 64(2), 200–214. https://doi.org/10.13168/CS.2020.0009
  23. Chen, X., Zhang, T., Bi, W., & Cheeseman, C. (2019). Effect of tartaric acid and phosphoric acid on the water resistance of magnesium oxychloride (moc) cement. Construction And Building Materials, 213, 528-536. https://doi.org/10.1016/j.conbuildmat.2019.04.086.
  24. Gong, W., Wang, N., Zhang, N., Han, W., & Qiao, H. (2020). Water resistance and a comprehensive evaluation model of magnesium oxychloride cement concrete based on taguchi and entropy weight method. Construction And Building Materials, 260, 119817. https://doi.org/10.1016/j.conbuildmat.2020.119817
  25. Huang, Q., Wang, S., Du, Y., Yin, Z., Chen, B., Zhang, J., & Zheng, W. (2024). Effect of phosphoric acid and soluble phosphate on the properties of magnesium oxychloride cement. Materials, 17(19), 4828. https://doi.org/10.3390/ma17194828