SavedAdd your journal

Journals / Teknik Dergi / 2021 / Cilt: 32 - Sayı: 3

Investigation of the Effects of Nanoclay/Polymer/Bitumen Nanocomposite Preparation Method on Asphalt Mixture Performance

Nanokil/Polimer/Bitüm Nanokompozit Hazırlama Yönteminin Asfalt Karışım Performansı Üzerindeki Etkilerinin Araştırılması

Erol İSKENDER
Atakan AKSOY
Pages
10885–10906
Publication Date
2021-05-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

For SBS/nanoclay/bitumen nanocomposites, better results were revealed by adding NC before.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to investigate the effects of the production processes of nanoclay/polymer/bitumen nanocomposites on the performance of the asphalt mixture.
📊
Key Findings & Data:In the study, styrene butadiene styrene (SBS) and ethylene vinyl acetate (EVA) with nanoclay (NC) were added to the bitumen by changing the priority of adding.
💡
Conclusion & Impact:For SBS/nanoclay/bitumen nanocomposites, better results were revealed by adding NC before.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Asfalt karışım · nanokil · nanokompozit

Abstract

The aim of this study is to investigate the effects of the production processes of nanoclay/polymer/bitumen nanocomposites on the performance of the asphalt mixture. In the study, styrene butadiene styrene (SBS) and ethylene vinyl acetate (EVA) with nanoclay (NC) were added to the bitumen by changing the priority of adding. Asphalt mixtures produced with polymer modified asphalt nanocomposites were evaluated by indirect tensile strength, modified Lottman method, repeated creep test and LCPC French rutting test. For EVA/nanoclay/bitumen nanocomposites, when EVA polymer was added to bitumen before nanoclay, higher water damage, cracking and deformation resistances were obtained. For SBS/nanoclay/bitumen nanocomposites, better results were revealed by adding NC before.

Özet

Bu çalışmanın amacı, nanokil/polimer/bitüm nanokompozitlerin üretim süreçlerinin asfalt karışım performansı üzerindeki etkilerini araştırmaktır. Çalışmada nanokil (NC) ile stiren bütadiyen stiren (SBS) elastomerik polimeri ve etilen vinil asetat (EVA) plastomerik polimerleri katılma önceliği değiştirilerek bitüme ilave edilmiştir. Polimer modifiye asfalt nanokompozitlerle üretilen asfalt karışımlar dolaylı çekme mukavemeti, modifiye Lottman yöntemi, tekrarlı sünme deneyi ve Fransız tekerlek izi testleri ile değerlendirilmiştir. EVA/nanokil/bitüm nanokompozitler için öncelikle EVA polimerinin eklenmesi durumunda su hasarı, deformasyon ve çatlama dirençlerinde artış gözlenmiştir. SBS’li nanokompozitler kullanıldığında önce nanokil ilavesi genelde daha iyi sonuçlar vermiştir.

🔖

Cite This Article

İSKENDER, E., AKSOY, A. (2021). Investigation of the Effects of Nanoclay/Polymer/Bitumen Nanocomposite Preparation Method on Asphalt Mixture Performance. Teknik Dergi, Cilt: 32 - Sayı: 3, 10885–10906. https://ajindex.com/articles/142875

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Tabatabaee, H. A., Bahia, H. U. Life cycle energy and cost assessment method for modified asphalt pavements. Procedia-Social and Behavioral Sciences, 54, 1220-1231, 2012
  2. Golestani, B., Nama, B.H., Nejad, F.M., Fallah, S. Nanoclay application to asphalt concrete: Characterization of polymer and linear nanocomposite-modified asphalt binder and mixture, Construction and Building Materials 91, 32–38, 2015
  3. You, Z., Mills-Beale, J., Foley, J.M., Roy, S., Odegard, G.M., Dai, Q., Goh, S.W. Nanoclay-modified asphalt materials: Preparation and characterization, Construction and Building Materials 25, 1072–1078, 2011
  4. Şengöz, B., Topal, A., Işıkyakar, G. Morphology and image analysis of polymer modified bitumens, Construction and Building Materials 23, 1986–1992, 2009
  5. Durrieu, F., Farcas, F., Mouillet, V. The influence of UV aging of a styrene/butadiene/styrene modified bitumen: comparison between laboratory and on site aging, Fuel 86, 1446–1451, 2007
  6. Zhu, J., Birgisson, B., Kringos, N. Polymer modification of bitumen: advances and challenges, European Polymer Journal 54, 18–38, 2014
  7. Yusoff, N. I. M., Breem, A. A. S., Alattug, H. N., Hamim, A., Ahmad, J. The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures. Construction and Building Materials, 72, 139-147, 2014
  8. Bala, N., Kamaruddin, İ., Napiah, M., Sutanto, M.H. Polymer Nanocomposite - Modified Asphalt: Characterisation and Optimisation Using Response Surface Methodology, Arabian Journal for Science and Engineering 44, 4233–4243, 2019
  9. Oner, J. Examination of storage stability behaviour of polymer modified bitumen involving nanoclay. Eurasian Journal of Civil Engineering and Architecture EJCAR, 3, 49-55, 2019
  10. Jasso, M., Bakos, D., MacLeod, D., Zanzotto, L. Preparation and properties of conventional asphalt modified by physical mixtures of linear SBS and montmorillonite clay, Construction and Building Materials 38, 759–765, 2013
  11. Farias, L. G. A., Leitinho, J. L., Amoni, B. D. C., Bastos, J. B., Soares, J. B., Soares, S. D. A., de Sant'Ana, H. B. Effects of nanoclay and nanocomposites on bitumen rheological properties. Construction and building materials, 125, 873-883, 2016
  12. Mohammadiroudbari, M., Tavakoli, A., Aghjeh, M. K. R., Rahi, M. Effect of nanoclay on the morphology of polyethylene modified bitumen. Construction and Building Materials, 116, 245-251, 2016
  13. Galooyak, S. S., Dabir, B., Nazarbeygi