SavedAdd your journal

Journals / International Journal of Automotive Science and Technology / 2026 / Volume: 10 Issue: 3

Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends

Turan Alp Arslan(AFYON KOCATEPE ÜNİVERSİTESİ)0000-0003-3259-4854
Emrah Erçek(AFYON KOCATEPE UNIVERSITY)0000-0001-6441-4200
Pages
—
Publication Date
2026-10-04
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The findings revealed that adding 10% toluene by volume to diesel fuel prolonged the ignition delay due to the low cetane number, delayed the CA50, and reduced the ITE while increasing BSFC and CO, HC, and NOx emissions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Multi-component alternative fuel blends have the potential to improve diesel engine performance and combustion while reducing harmful exhaust emissions.
📊
Key Findings & Data:In this study, the effects of toluene and cerium oxide (CeO2) nanoparticles added to diesel fuel on engine performance, combustion, and emissions were experimentally investigated.
💡
Conclusion & Impact:The findings revealed that adding 10% toluene by volume to diesel fuel prolonged the ignition delay due to the low cetane number, delayed the CA50, and reduced the ITE while increasing BSFC and CO, HC, and NOx emissions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Cerium oxide · Combustion characteristics · Diesel engine

Abstract

Multi-component alternative fuel blends have the potential to improve diesel engine performance and combustion while reducing harmful exhaust emissions. In this study, the effects of toluene and cerium oxide (CeO2) nanoparticles added to diesel fuel on engine performance, combustion, and emissions were experimentally investigated. The experiments were conducted on a single-cylinder diesel research engine at a constant engine speed of 1800 rpm and at four different engine loads: 10.98, 16.48, 21.97, and 27.46 Nm. Commercial diesel fuel was employed as the reference fuel, whereas the alternative fuels comprised a T10D90 blend containing 10 vol. % toluene and T10D90C40, T10D90C80, and T10D90C120 blends, containing 40, 80, and 120 ppm CeO2 nanoparticles, respectively. The effects of the fuels were evaluated in terms of in-cylinder pressure, heat release rate (HRR), indicated thermal efficiency (ITE), brake specific fuel consumption (BSFC), exhaust gas temperature (EGT), indicated mean effective pressure (IMEP), coefficient of variation of IMEP (COVIMEP), maximum pressure rise rate (MPRR), combustion phase (CA50), carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NOx) emissions. The findings revealed that adding 10% toluene by volume to diesel fuel prolonged the ignition delay due to the low cetane number, delayed the CA50, and reduced the ITE while increasing BSFC and CO, HC, and NOx emissions. In contrast, CeO2 nanoparticles improved combustion particularly at medium and high engine loads—through their catalytic effect, thereby increasing in-cylinder pressure, HRR, and ITE, reducing BSFC and CA50, and largely mitigating the adverse effects of toluene addition. In particular, the T10D90C120 fuel containing 120 ppm CeO2 demonstrated the most significant improvement among the additive-containing fuels, delivering an ITE value of 35.95% at a load of 21.97 Nm. Overall, CeO2 nanoparticles effectively improved the combustion characteristics of diesel–toluene blends.

🔖

Cite This Article

Arslan, T. A., Erçek, E. (2026). Experimental Investigation of Diesel Engine Characteristics Fueled with Cerium Oxide Nanoparticle-Doped Toluene-Diesel Blends. International Journal of Automotive Science and Technology, Volume: 10 Issue: 3. https://doi.org/10.30939/ijastech..1988706

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (66)

  1. Energy Institute. Statistical review of world energy 2026. 75th ed. Energy Institute; 2026.
  2. Mutlu B, Özyörük B. Evaluating biomass energy potential with multi-criteria decision methods: Insights for policy makers. Engineering Perspective. 2026;6(2):147-169. https://doi.org/10.64808/engineeringperspective.1789924
  3. Coşman S, Demir U, Çelebi S, Ateş S, Emen F. Combustion performance and emission effects of a novel palladium thiourea additive in a diesel engine with EGR. Fuel. 2027;428:140494. https://doi.org/10.1016/j.fuel.2026.140494
  4. International Energy Agency. CO2 emissions. In: Global Energy Review 2025 [Internet]. Paris: International Energy Agency; 2025 [cited 2026 Oct 4]. Available from: https://www.iea.org/reports/global-energy-review-2025/co2-emissions
  5. Ardebili SMS, Calam A, Solmaz H, Böğrek A, Haşimoğlu C. Improving the combustion process of a homogeneous charge compression ignition engine running with triple fuel blend using response surface methodology. J Braz Soc Mech Sci Eng. 2024;46(8):486. https://doi.org/10.1007/s40430-024-05060-0
  6. Demir U, Çelebi S, Arda E, Kocakulak T, Arslan TA. RSM-based investigation and optimization of ethanol port injection, EGR rate, engine load, and fuel type on combustion noise and vibration in a diesel engine. Heat Transf Res. 2026;57(10):1-30. https://doi.org/10.1615/HeatTransRes.2026062174
  7. Ciatti SA. Compression ignition engines – Revolutionary technology that has civilized frontiers all over the globe from the industrial revolution into the twenty-first century. Front Mech Eng. 2015;1:5. https://doi.org/10.3389/fmech.2015.00005
  8. Poorghasemi K, Saray RK, Solmaz H, Mousavi SM, Zehni A. Multi-dimensional 3D-CFD/chemical-kinetics modeling of natural gas–diesel RCCI engines: Combustion phasing, efficiency and emissions. Engineering Perspective. 2026;6(1):69-82. https://doi.org/10.64808/engineeringperspective.1802746
  9. Chembedu G, Manu PV. Investigation and optimisation of performance and emission data of CI engine ternary blends under distinct conditions. Fuel. 2025;383:133823. https://doi.org/10.1016/j.fuel.2024.133823
  10. Kadam PM, Dolas DR. Performance and emission characteristics evaluation of graphene nanoplatelets (GNP) additives-based soybean and diesel fuel for a compression ignition engine under varying loads. Int J Automot Sci Technol. 2025;9(1):89-99. https://doi.org/10.30939/ijastech.1588443
  11. Naik GG, Dharmadhikari HM, More SA, Sarris IE. The optimization of a ternary blend using grey relation analysis with the Taguchi method for the improved performance and reduction of exhaust emissions. Fire. 2025;8(2):83. https://doi.org/10.3390/fire8020083
  12. Arda E, Çelebi S, Demir U, Seçgin Ö. Effect of carbon nanotube additives on diesel engine performance, combustion, and emissions under variable EGR conditions. Heat Transf Res. 2026;57(8):63-98. https://doi.org/10.1615/HeatTransRes.2025061352
  13. Potnuru BD, Indra Kiran NVN, Sagari J. Nanoparticle-assisted ternary fuel blends: an investigation of diesel engine performance, combustion and emission profiles. Int J Energ Water Res. 2025;9(4):1729-1739. https://doi.org/10.1007/s42108-025-00355-x
  14. Malik MAI, Kalam MA, Abbas MM, Silitonga AS, Ikram A. Recent advancements, applications, and technical challenges in fuel additives-assisted engine operations. Energy Convers Manag. 2024;313:118643. https://doi.org/10.1016/j.enconman.2024.118643
  15. Çelebi S, Demir Ü. Noise and vibration behavior of a diesel engine operating with CNT-blended fuels and different EGR rates. International Journal of Automotive Engineering and Technologies. 2025;14(3):199-214. https://doi.org/10.18245/ijaet.1651115
  16. Çılğın E. Synergistic effects of SWCNT and MgO nanoparticle additives on engine performance and emissions: a laboratory analysis approach. Biofuels. 2025;16(8):848-868. https://doi.org/10.1080/17597269.2025.2460135
  17. Gupta A, Kumar R, Maurya A, Ahmadi MH, Ongar B, Yegzekova A, et al. A comparative study of the impact on combustion and emission characteristics of nanoparticle-based fuel additives in the internal combustion engine. Energy Sci Eng. 2024;12(1):284-303. https://doi.org/10.1002/ese3.1614
  18. Şanlı A. Evaluation of performance and emissions of methanol, ethanol, and n-butanol blends in a common-rail diesel engine. Int J Automot Sci Technol. 2026;10(2):313-324. https://doi.org/10.30939/ijastech.1887721
  19. Akgün F, Çelebi S, Demir Ü. Combustion behaviour and emission trends of diesel–jp8 blends in a single-cylinder diesel engine. European Mechanical Science. 2025;9(3):263-276. https://doi.org/10.26701/ems.1697763
  20. Agarwal S, Yadav A, Mudgal A, Khan S. Comparative evaluation of diesel engine performance and emission characteristics using carbon nanotubes & graphene oxide in ternary fuel (jojoba biodiesel-diesel-methanol) blends. Next Research. 2025;2(1):100141. https://doi.org/10.1016/j.nexres.2025.100141
  21. Murugan MA, Ganesan N. Effect of methanol concentration on combustion and vibro-acoustic behaviour of a single-cylinder diesel engine fuelled with waste fried oil biodiesel-methanol-diesel ternary fuel blends at lower compression ratio. Sustain Energy Technol Assess. 2025;80:104403. https://doi.org/10.1016/j.seta.2025.104403
  22. Hemtanon K, Thawornprasert J, Somnuk K. Effects of diesel–biodiesel–ethanol–TiO2 nanoparticle blended fuels on the performance and emissions of a direct injection diesel engine. ACS Omega. 2025;10(17):17337-17352. https://doi.org/10.1021/acsomega.4c10500
  23. Chen B, Liu P, Liu B, Wang Z, Gao X, Roberts WL. Low temperature chemistry of 1,2,4-trimethylbenzene in a blend with n-heptane. Combust Flame. 2024;259:113209. https://doi.org/10.1016/j.combustflame.2023.113209
  24. Qian Y, Qiu Y, Zhang Y, Lu X. Effects of different aromatics blended with diesel on combustion and emission characteristics with a common rail diesel engine. Appl Therm Eng. 2017;125:1530-1538. https://doi.org/10.1016/j.applthermaleng.2017.07.145
  25. Lee CF, Wu Y, Wu H, Shi Z, Zhang L, Liu F. The experimental investigation on the impact of toluene addition on low-temperature ignition characteristics of diesel spray. Fuel. 2019;254:115580. https://doi.org/10.1016/j.fuel.2019.05.163
  26. Xiao Z, Ladommatos N, Zhao H. The effect of aromatic hydrocarbons and oxygenates on diesel engine emissions. Proc Inst Mech Eng D J Automob Eng. 2000;214(3):307-332. https://doi.org/10.1243/0954407001527448
  27. Sun X, Liang X, Shu G, Wang Y, Chen Y. Effect of toluene content on the combustion and emissions of large two-stroke marine diesel engine. Appl Therm Eng. 2019;159:113909. https://doi.org/10.1016/j.applthermaleng.2019.113909
  28. Özer S. The effect of adding toluene to increase the combustion efficiency of biodiesel. Energy Sources A Recovery Util Environ Eff. 2024;46(1):9325-9340. https://doi.org/10.1080/15567036.2020.1776421
  29. Bastawissi HA, Elkelawy M, Elsamadony MO, Ghazaly M. Performance and emissions characteristics of multi-cylinder direct injection diesel engine fuelled with diesel/biodiesel and toluene additives. Journal of Engineering Research. 2024;8(6):11. https://doi.org/10.21608/jer.2024.508199
  30. Kumar S, Dinesha P, Bran I. Experimental investigation of the effects of nanoparticles as an additive in diesel and biodiesel fuelled engines: A review. Biofuels. 2019;10(5):615-622. https://doi.org/10.1080/17597269.2017.1332294
  31. Wei J, Yin Z, Wang C, Lv G, Zhuang Y, Li X, et al. Impact of aluminium oxide nanoparticles as an additive in diesel-methanol blends on a modern DI diesel engine. Appl Therm Eng. 2021;185:116372. https://doi.org/10.1016/j.applthermaleng.2020.116372
  32. Zhou Z, Zhang J, Liu Y. Promoted low-temperature CO oxidation activity of CeO2 by Cu doping: The important role of oxygen vacancies. Fuel. 2024;359:130434. https://doi.org/10.1016/j.fuel.2023.130434
  33. Çelik M, Bayındırlı C, İlhak Mİ. Investigation of the performance and emissions of an engine operated with CeO2 nano additive doped biodiesel. Int J Automot Sci Technol. 2022;6(2):113-119. https://doi.org/10.30939/ijastech.1063986
  34. Singh D, Saikia S, Deb P, Paul A. Role of CeO2-doped pilot. Fuel. 2027;428:140321. https://doi.org/10.1016/j.fuel.2026.140321
  35. Munimathan A, Kumar KS, Singh S, Dhairiyasamy R, Kareemullah M, Algburi S, et al. Performance, combustion, and emission analysis of CeO2 enriched tobacco seed oil biodiesel in CI engines. Case Stud Therm Eng. 2025;75:107261. https://doi.org/10.1016/j.csite.2025.107261
  36. Birhanu B, Deshmukh D, Yemane TH, Yeneneh K. Influence of CeO2 nanoparticle addition on engine performance, combustion, and emissions of ethiopian podocarpus falcatus biodiesel. Sci Rep. 2026;16(1):12289. https://doi.org/10.1038/s41598-026-42636-3
  37. Saraee HS, Taghavifar H, Jafarmadar S. Experimental and numerical consideration of the effect of CeO2 nanoparticles on diesel engine performance and exhaust emission with the aid of artificial neural network. Appl Therm Eng. 2017;113:663-672. https://doi.org/10.1016/j.applthermaleng.2016.11.044
  38. Fayad MA, Al-Ogaidi BR, Abood MK, Al-Salihi HA. Influence of post-injection strategies and CeO2 nanoparticles additives in the C30D blends and diesel on engine performance, NOx emissions, and PM characteristics in diesel engine. Part Sci Technol. 2022;40(7):824-837. https://doi.org/10.1080/02726351.2021.2017088
  39. Manigandan S, Sarweswaran R, Devi PB, Sohret Y, Kondratiev A, Venkatesh S, et al. Comparative study of nanoadditives TiO2, CNT, Al2O3, CuO and CeO2 on reduction of diesel engine emission operating on hydrogen. Fuel. 2020;262:116336. https://doi.org/10.1016/j.fuel.2019.116336
  40. Özer S, Akçay M, Vural E. Effect of toluene addition to waste cooking oil on combustion characteristics of a CI engine. Fuel. 2021;303:121284. https://doi.org/10.1016/j.fuel.2021.121284
  41. Gürsoy HO, Solmaz H, Kocakulak T, Arslan TA, Calam A. Enhancement of combustion characteristics of waste alcohol using n-heptane through RSM in an HCCI engine. Energy. 2024;313:133838. https://doi.org/10.1016/j.energy.2024.133838
  42. Polat S, Solmaz H, Yılmaz E, Calam A, Uyumaz A, Yücesu HS. Mapping of an HCCI engine using negative valve overlap strategy. Energy Sources A Recovery Util Environ Eff. 2020;42(9):1140-1154. https://doi.org/10.1080/15567036.2019.1602224
  43. Hohenberg GF. Advanced approaches for heat transfer calculations. SAE Technical Paper 790825. 1979. https://doi.org/10.4271/790825
  44. Arslan TA, Bayrakçeken H, Altuncu A, Çengelci E, Solmaz H. The effect of ignition timing on engine performance in a laser ignition engine: A CFD study. Mechanical Engineering for Society and Industry. 2025;5(1):33-51. https://doi.org/10.31603/mesi.12461
  45. Ali R, Yücesu HS, Calam A, Solmaz H. Detailed experimental analysis of combustion characteristics of port fuel injected HCCI engine with n-butanol DEE blends for emission reduction. Energy. 2025;333:137474. https://doi.org/10.1016/j.energy.2025.137474
  46. Güler S, Uyumaz A, Baydır ŞA, Erçek E, Aksoy F. Investigation of the effects on performance and emissions of biodiesel obtained from safflower oil by microwave heating. Engineering Perspective. 2026;6(2):252-259. https://doi.org/10.64808/engineeringperspective.1813220
  47. Arda E, Demir M, Çelebi S, Demir Ü, Seçgin Ö. Leveraging advanced machine learning algorithms for energy efficiency and carbon footprint reduction in diesel engines. Int J Automot Sci Technol. 2026;10(1):241-259. https://doi.org/10.30939/ijastech.1896122
  48. Calam A, Ali R, Solmaz H. Impact of acetone-butanol-ethanol ternary fuel on combustion and emissions in a low-temperature combustion engine with variable compression ratio. Energy Convers Manag. 2025;343:120194. https://doi.org/10.1016/j.enconman.2025.120194
  49. Çelik A, Kunt MA. A study on predicting engine performance outputs by machine learning algorithms in a single cylinder HCCI engine. Engineering Perspective. 2026;6(1):57-68. https://doi.org/10.64808/engineeringperspective.1782349
  50. Kline SJ, McClintock FA. Describing uncertainties in single-sample experiments. Mech Eng. 1953;75:3-8.
  51. Horoz E, Baydır ŞA. Engine speed–dependent NOx reduction behavior of safflower–sunflower biodiesel blends in an SCR-equipped diesel engine. Engineering Perspective. 2026;6(3):331-343. https://doi.org/10.64808/engineeringperspective.1894491
  52. Türkcan A, Çanakcı M. Experimental investigation of combustion characteristics and emissions of an indirect injection diesel engine under different operating conditions. Energy Fuels. 2009;23(4):1790-1796. https://doi.org/10.1021/ef800335w
  53. Li P, Chen X, Li Y, Schwank JW. A review on oxygen storage capacity of CeO2-based materials: Influence factors, measurement techniques, and applications in reactions related to catalytic automotive emissions control. Catal Today. 2019;327:90-115. https://doi.org/10.1016/j.cattod.2018.05.059
  54. Kumar MV, Babu AV, Kumar PR, Dundi TMK. Influence of different nozzle hole orifice diameter on performance, combustion and emissions in a diesel engine. Aust J Mech Eng. 2020;18(2):179-184. https://doi.org/10.1080/14484846.2018.1453975
  55. Hoang AT. Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: A review. Fuel Process Technol. 2021;218:106840. https://doi.org/10.1016/j.fuproc.2021.106840
  56. Azad AK, Ameer Uddin SM, Alam MM. A comprehensive study of DI diesel engine performance with vegetable oil: An alternative boi-fuel source of energy. Int J Automot Mech Eng. 2012;5:576-586. https://doi.org/10.15282/ijame.5.2012.4.0045
  57. Ding SL, Yang LP, Song EZ, Ma XZ. Investigations on in-cylinder pressure cycle-to-cycle variations in a diesel engine by recurrence analysis. SAE Technical Paper 2015-01-0875. 2015. https://doi.org/10.4271/2015-01-0875
  58. Nowak Ł, Tutak W. Combustion stability of dual fuel engine powered by diesel-ethanol fuels. Combust Engines. 2019;178(3):155-161. https://doi.org/10.19206/CE-2019-327
  59. Uyumaz A, Aydoğan B, Solmaz H, Yılmaz E, Hopa DY, Aksoy Bahtli T, et al. Production of waste tyre oil and experimental investigation on combustion, engine performance and exhaust emissions. J Energy Inst. 2019;92(5):1406-1418. https://doi.org/10.1016/j.joei.2018.09.001
  60. Calam A. The effect of n-heptane-tetrahydrofuran mixtures on combustion, performance and emissions in a homogeneous charge compression ignition engine. Journal of Polytechnic. 2021;24(3):1033-1043. https://doi.org/10.2339/politeknik.796099
  61. Solmaz H, Yamık H, Uyumaz A, Polat S, Yılmaz E. An experimental study on the effects of diesel and jet-a1 fuel blends on combustion, engine performance and exhaust emissions in a direct injection diesel engine. Journal of Thermal Science and Technology. 2016;36(2):51-60.
  62. Mehta B, Subhedar D, Patel G, Swarnkar A. Experimental investigation of performance and emission characteristics of diesel engine with use of rape seed oil as biodiesel. IOP Conf Ser Mater Sci Eng. 2020;872(1):012093. https://doi.org/10.1088/1757-899X/872/1/012093
  63. Kadam PM, Dolas DR. Performance and emission characteristics evaluation of graphene nanoplatelets (GNP) additives-based soybean and diesel fuel for a compression ignition engine under varying loads. Int J Automot Sci Technol. 2025;9(1):89-99. https://doi.org/10.30939/ijastech.1588443
  64. Şanlı A. Evaluation of performance and emissions of methanol, ethanol, and n-butanol blends in a common-rail diesel engine. Int J Automot Sci Technol. 2026;10(2):313-324. https://doi.org/10.30939/ijastech.1887721
  65. Çelik M, Bayındırlı C, İlhak Mİ. Investigation of the performance and emissions of an engine operated with CeO2 nano additive doped biodiesel. Int J Automot Sci Technol. 2022;6(2):113-119. https://doi.org/10.30939/ijastech.1063986
  66. Arda E, Demir M, Çelebi S, Demir Ü, Seçgin Ö. Leveraging advanced machine learning algorithms for energy efficiency and carbon footprint reduction in diesel engines. Int J Automot Sci Technol. 2026;10(1):241-259. https://doi.org/10.30939/ijastech.1896122